• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.10-22
• /
• 1998

In this paper, as a way of improving the availability and spectral efficiency of radio relay system, a co-channel radio relay system based upon the synchronous digital hierarchy is developed and its performance measured by 64-QAM with a never-seen multi-purpose ASIC chip is illustrated. This system provides a couple of transmission capacity compared with alternative channel arrangement. By adopting a powerful complex 13-tap adaptive time domain equalizer and cross-pol interference canceller, improvement of more than 1.5 ~ 2.0 dB in signature is obtained in comparison to 9 or 11-tap adaptive time domain equalizer, and about 22.5 dB in improvement factor of cross-pol interference canceller is achieved at C/N of 24.5 dB. In addition, digital filter makes it possible to optimize the occupied bandwidth by selecting an appropriate roll-off factor externally. It is expected that co-channel radio relay system with the powerful multi-purpose ASIC chip plays a key role in creating a value-added product, reliability, and reducing the outage time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.247-254
• /
• 2004

We introduce a new space-time signal processing scheme that uses both transmitter diversity technique and transmitter beamforming technique for code-division multiple access (CDMA) systems. Over complex Gaussian Rayleigh channel, the introduced scheme achieves the diveristy gain through the transmitter diversity technique. and the SNR gain by th transmitter beamforming technique. Bit error rate (BER) analyses are given to each of the three cases in which the transmitter diversity scheme, the transmitter beamforming scheme and the introduced scheme are used, in the slowly varying Rayleigh frequency nonselective fading channel. The Monte-Carlo simulation results are shown to match to the analytic results. When the channels between distant antennas are independent, analytic results show that the introduced scheme achieves the lowest $E_{b/}$ $N_{0}$ at target BER 10$^{-6}$ . When the channels between distant antennas are correlated, analytic and simulation results show that the introduced scheme is more robust to the change of channel correlation.n.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.777-786
• /
• 2001

In this paper, as one of countermeasure techniques for a frequency selective fading, a digital slope equalizer(DSE) for 64-QAM digital radio relay system is analyzed in terms of principle, channel modeling, and digital implementation. Also computer simulations have been performed for DSE with a complex 13-tap adaptive time domain equalizer chip. It is shown that about 4.5 dB improvement in system signature can be obtained at the channel edge, and a variety of simulated results are reviewed in view of DSE modeling limit, operating frequency, control coefficient, signal constellation, and system signature. Finally, the functions of DSE chip confirmed up to 61 MHz clock operation are illustrated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6C
• /
• pp.403-411
• /
• 2011

This paper addresses a cooperative transmission scheme based on Alamouti coding for cognitive radio networks over frequency selective fading channels. In the proposed scheme, the Alamouti coded form at the destination node is constructed through a simple combination of symbols at the source node, instead of the time-reversal operation and the conjugate operation at the relay nodes used in the conventional scheme. Numerical results show that the proposed scheme achieves a higher order cooperative diversity than that of the conventional scheme.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.213-220
• /
• 2011

In this paper, the channel preprocessor with an area-efficient architecture is proposed for the MIMO symbol detector which can support four transmit and receive antennas. The proposed channel preprocessor can shrink the channel dimension to reduce the hardware complexity of the MIMO symbol detector. Also, the proposed channel preprocessor is implemented with very low complexity by using QR decomposition (QRD) and log-number system (LNS). By applying QRD and LNS to the nulling matrix calculation block, the numbers of matrix-multiplications and matrix-divisions are decreased and thus the complexity of the proposed channel preprocessor is significantly reduced. The proposed channel preprocessor was designed in a hardware description language (HDL) and synthesized to gate-level circuits using 0.13um CMOS standard cell library. With the proposed channel preprocessor, the number of logic gates for channel preprocessor is reduced by 20.2% compared with the conventional architecture.

• Electronics and Telecommunications Trends
• /
• v.18 no.6 s.84
• /
• pp.19-26
• /
• 2003

다양한 이동통신기기들을 한 시스템에 수렴시킬 수 있는 기술로서 SDR 기술이 각광받고 있다. 본 논문은 W-CDMA 물리계층 업링크의 트래픽 채널을 DSP로 구현하여 베이스밴드 프로세싱 하는 것을 목적으로 한다. 이러한 소프트웨어 모뎀은 초기화, 소스 데이터 발생, 스프레딩, 스크램블링, 출력단 등으로 이루어진다. 기존의 FPGA, ASIC 등으로 구현된 하드웨어 모뎀을 소프트웨어적인 DSP로 구현할 때 생기는 주요 문제들을 고찰하였다. 로드 밸런싱, 동시성과 실시간성, 버퍼 스킴, 멀티 태스킹, 인터럽트 관리, OVSF 및 스크램블링 코드의 복소수 연산 등이다. 전통적인 구조는 FPGA와 DSP 혼합체인데 각각 칩레벨 프로세싱, 심볼 프로세싱을 담당한다. FPGA와 DSP 혼합체 구조를 넘어서 멀티 DSP를 이용한 병렬처리기법, 또는 reconfiguable 칩을 개발해서 칩레벨 및 심볼 프로세싱을 한 번에 할 수 있는 개발제품도 출시되었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.1
• /
• pp.109-116
• /
• 1998

In this paper, a back propagation neural network teaming algorithm based on the complex multilyer perceptron is represented for suppressing narrowband interference of the received signals in DS-SS mobile communication system. We proposed neural network adaptive correlator(NNAC) which has fast convergence rate and good performance with combining back propagation neural network and the receiver of DS-SS. We analyzed and proved that NNAC has lower bit error probability than that of traditional RAKE receiver through results of computer simulation in the presence of the tone and narrow-band interference and the co-channel interference.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.411-414
• /
• 2006

본 논문은 다양한 GPS 재밍대응 기술 중에서 안테나 기반의 CRPA(Controlled Reception Pattern Antenna) 시스템에 관한 소개 및 안테나의 널(null) 패턴 합성에 필요한 핵심 모듈인 디지털 I/Q 벡터모듈레이터(Vector Modulator)를 이용한 GPS용 $2{\times}2$ CRPA 패턴 제어방법에 관한 연구 내용이다. 일반적으로 시스템에서 미리 결정된 방향으로 만들어진 안테나 빔을 이용한 위상배열안테나(phased array antenna)와는 달리 CRPA 구조의 GPS 위성수신용 적응배열안테나(adaptive array antenna)는 각 안테나 소자(element)로부터 수신된 신호들을 실시간으로 해석하여, GPS 배열 안테나의 패턴 특성을 제어한다. 본 연구에서는 $2{\times}2$ 배열 정사각(square) 구조의 CRPA를 채택했으며, 재밍신호 방향으로 널(null) 패턴을 합성하기 위한 방법으로 PC에서 제어 가능한 DAC(Digital to Analog Converter)을 이용하여 I/Q 벡터모듈레이터로 인가되는 RF신호의 위상(phase) 및 진폭(amplitude)을 조절한다. 이때 원하는 널(null) 패턴이 합성되도록 네 개의 각 안테나 소자 쪽으로 8채널의 복소가중치(complex weight)를 인가한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.360-370
• /
• 2010

In this paper, a distributed beamforming problem is considered in an amplify-and-forward (AF) wireless relay network consist of multiple source-destination pairs and relaying nodes. To exploit degree of freedom of the number of beamformers, in the first step, we proposed that the sources transmit their signals through orthogonal channels. During the second step, the relays transmit their received signals multiplied by complex weights to amplify and compensate for phase changes introduced by the backward channels through one common channel. The optimal beamforming vectors are obtained through minimization of the total relay transmit power while the signal-to-interference-plus-noise ratios (SINRs) at the destinations are above certain thresholds to meet a quality of services (QoSs) level. In the numerical example, it is shown that the proposed scheme needs less transmit power for moderate network data rates than other schemes, such as space division multiplexing or time-division multiplexing scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1172-1175
• /
• 2011

In this paper, a design method of multi-tone signals for the measurement of adjacent-channel power-ratios on power amplifiers is suggested. Because most tests for power amplifiers in production are performed with single-tone signals, its testing accuracy is not guaranteed as the signal complexity increases. Therefore, the application of multi-tone signals to the testing is suggested by optimized complex coefficients of each tones for the best statistical similarity to the original modulated signal. From the verification, a 802.11a signal was replaced with a multi-tone signal of N=10, with the complex coefficients generated by the suggested method. The resulting measurements on the ACLR of 2.4 GHz power amplifier showed successful accuracy of less than 1 dB discrepancy.