• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.5
• /
• pp.73-83
• /
• 2001

The mass and stiffness of upper wall-lower frame system(mixed building structures) change sharply at transfer floor due to different structural system in upper and lower part. These mixed building structures generally show the stiffness, weight or geometric vertical irregularities. The purpose of this study is to investigate the response characteristics of these structures by push-over analysis and nonlinear time history analysis. For four types of analysed models, only the variation of upper wall stories was considered. The conclusions of this study are following; (1) In the push-over analysis, yielding hinges in beams and columns of lower frame occurred at the base shear of similar magnitude in all models. But as the number of stories of upper wall increases, yielding hinges at ends of coupling beams were observed in the small magnitude of base shear. (2) In the nonlinear time history analysis, yielding of lower frame occurred at beams with as small ground acceleration as 55gal, and in upper walls yielding was concentrated on coupling beams and shear walls near the transfer floor. (3) As the number of stories of upper walls decreases, the story stiffness of the lower frames decreased relatively and the occurrence of soft stories in the lower frame was observed.

• Journal of the Korean Geophysical Society
• /
• v.3 no.3
• /
• pp.141-152
• /
• 2000

In the vicinity of the Antarctic-Scotia plate boundary off Elephant Island(EI), geophysical data(multichannel seismic and gravity data) reveal rapid structural variation of the Shackleton Fracture Zone(SFZ) along its strike. The SFZ ridge terminates in front of the Antarctic Peninsula margin, whereas the transform fault of the SFZ continues farther southeast near EI and the width of the SFZ broadens toward the southeast. Accordingly, the SFZ transform fault changes its morphology along its strike as (1) a graben structure along the high Shackleton ridge in Drake Passage, (2) a half-graben structure in oceanic crust just southeast of the Antarctic-Scotia plate boundary, and (3) splay faults deforming the margin of EI. Two phases of tectonic deformation are clearly observed along the transform fault. Major extensional deformation had formed a large-scale half-graben during roughly about $10{\sim}20$ Ma when Drake Passage had opened. And then, the Shackleton fault has been reactivated with reverse sense, which has been caused by recent convergence between Antarctic and Scotia plates due to westward movement of the Scotia plate since 6 Ma.

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.55-70
• /
• 2001

Granitoids in the Younggwang-Kimje area can be divided into two types of granite. One is foliated granite (Cheongup and Kochang foliated granites) developed along the NE-SW direction kwangju fault system and the other is undeformed granite (Kimje and Younggwang granites) developed in the western part of the area. $SiO_2$ content of study area, Younggwang granite is 62.8-74.0%, Kochang foliated granite is 64.5-74.4%, Cheongup foliated granite is 64.5-70.2%, Kimje granite is 63.4-72.0%. The result indicated that these granitoids belong to the intermediate and acidic rock. In Harker's diagram, as $SiO_2$ increases, $Al_2O_3$, $Fe_2O_3$, MgO, CaO, $TiO_2$> $P_2O_{5}$s and MnO decrease, but $K_2O$ increases. In AFM diagram, Younggwang granite, Kochang foliated granite, Cheongup foliated granite and Kimje granite belong to calk-alkaline rock series. And in triangular diagrams of normative Qz-Or-Pl and An-Ab-Or, they are located in granodiorite and granite region. On the co-variation diagrams of trace elements with silica, Ba, Co, Li, Nb, An, Rb elements show increasing patterns. The diagrams of ACF and $Na_2O$ vs. $K_2O$ ratios indicate that granitoids of the study area belong to I-type.

• Economic and Environmental Geology
• /
• v.40 no.1 s.182
• /
• pp.47-66
• /
• 2007

The Sitting Buddha Carved on Rockcliff (National treasure No. 201) in Bukjiri consists of porphyritic biotite granite, which was fractured by three joint sets of NE-SW, EW and NS directions. They produced a physical weathering that broke many parts of the Buddha and background. The chemical index of alteration is 59 to 61 from the major elements in the granite that was weathered into producing kaolin minerals from alteration of feldspars and biotite. With weathering degree, major element compositions increase in $SiO_2$ and MnO, whereas decrease in $TiO_2,\;{Fe_2O_3}^t,\;MgO,\;CaO\;and\;K_2O$. Change proporations of trace elements to $Al_2O_3$ increase in all transition elements, Rb and Y, whereas decrease in Li, Sr and Ba. REE pattern increases only in HREE. Particularly, a decrease in CaO, $K_2O$, Sr and Ba results in what they are effluxed to dissolve from feldspars by groundwater. The Buddha image has been deteriorated into joints, color changes, brown rusts, granular decay, microorganic smears by the such weathering causes as deformation, moisture, temperature variation and microorganic living. The moisture, which leaks along the joints in the granite, not only dissolve to decompose minerals but also grows many microorganism and is frozen over during winter. NE-SW and NS joint sets affect to seep in water during rainy days to deteriorate the image because they extend outward.

• 한국해양학회지
• /
• v.30 no.1
• /
• pp.57-63
• /
• 1995

Two-layered fluid with sloping bottom and top(${\beta}$-effect) in rigid cylinder is put on the rotating table. To drive the lower-layer motion in "the Sverdrup type" flow external fluid is pumped into the lower-layer. By introducing inlet-outlet system in the upper-layer, an analogy to the Tsushima Tsugaru, Soya of the East Sea has been tested. The position of the inlet-outlet system and the difference between the strength of inlet or outlet flow are changed to see the effects of the wind stress on the upper-layer. The northern part of inflow toward the outlet may be interpreted roughly as the position of the polar front in the East Sea. Experimental observations have revealed that the inflow flows along the western boundary before it separates into the interior and flows straight toward the outlet position. However, the wind effect is imposed upon the upper-layer, the western boundary flow branches into two parts of which one flows along the boundary and the other flows into the interior under the influence of negative wind stress curl, while southward western boundary flow seems to block the flow and deflect it to the interior. The changes in the position of inlet-outlet system produce more significant changes in flow pattern in that cyclonic flow in the north controls the northern extent of the polar front by deflecting the northward interior motion toward the west(outlet). Interface displacement which depends strongly on the velocity difference between two layers seems to play crucial role in terms of the path of upper-layer flow, particularity, the inflow.

• Journal of Science of Art and Design
• /
• v.7
• /
• pp.128-149
• /
• 2005

Zou Si Cong is a very significant female artist from the period when China was forming its modern arts and culture. Zou Si Cong, who was influenced by China's political and social upheaval, was born in 1939 and died in 1996. Her actual work period was after China's 'Cultural Revolution' and lasted only 13 years, from 1978 to 1990. Her passion for art never stopped, even when she was suffering from severe arthritis with its torturing pain. There were big changes that occurred in her work; 'Early Work', 'Realistic Work', 'Mine Worker Painting', 'Yi Tribe' Painting', 'Lotus Paintings'. 'Mine Worker Painting', which represented a new figure by abandoning traditional techniques, dividing picture space, and changing and distorting forms, was the one that had the greatest impact of all on a lot of people and strongly influenced modern Chinese figurative painting. The characteristics of Zou Si Cong's work are in its 'Traditionalism', 'Realism, and 'Historical' aspects. Zou Si Cong developed her uniqueness, along with Western expressions, based on traditional Chinese painting techniques. Realism, through realistic rendering, appeared in her figurative paintings during the Cultural Revolution Period. 'Yi Tribe' paintings lively illustrated their lives. She creatively reinterpreted history in the composition of Mine Workers, which is based on the historical record of Chinese barbarity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5C
• /
• pp.231-238
• /
• 2012

The rockbolt functions as a main support, which restricts enlargement of the plasticity area and increases stability in the original ground around tunnels, and prevents a second deformation of an excavated surface by supplementing vulnerability arising from opening of the excavated surface. System bolting is generally applied if ground conditions are bad. System bolting is generally installed perpendicular to the excavation direction in every span. If a place is narrow, or it is difficult to insert bolts due to construction conditions, it may be connected and used with short bolts, or installed obliquely. In this study, laboratory model tests were performed to analyze the effect of the ground being reinforced by inclined bolts, based on a bending theory that assumes that the reinforced ground is a simple beam. In all test cases, deflections and vertical earth pressures induced by overburden soil pressure were measured. Total of 99 model tests were carried out, by changing the installation angle of bolts, lateral and longitudinal distance of bolts, and soil height. The model test results indicated that when the installation angle of bolts was less than $75^{\circ}$, deflections of model beams tended to increase rapidly. Also, the relaxed load that was calculated by earth pressure was rapidly increased when the installation angle of bolts was less than $75^{\circ}$. However, the optimum installation angle of inclined bolts was judged to be in the range of $90^{\circ}{\sim}75^{\circ}$. Also, as might be expected, the reinforcement effect of bolts was increased when the longitudinal and lateral distance of bolts was decreased.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.143-143
• /
• 2017

CrAlN 코팅은 높은 경도, 낮은 표면 조도 등의 상온에서의 우수한 기계적 특성 이외에 고온에서 안정한 합금상의 형성으로 인하여 우수한 내산화성 및 내열성을 보유하여 공구 코팅으로의 적용 가능성이 크다. 그러나 최근 공구사용 환경의 가혹화로 인하여 코팅의 내마모성 및 내열성 등의 물성 향상을 통한 공구의 수명 향상이 필요시 되고 있으며, 다양한 코팅 물질을 활용하여 다층 코팅을 합성함으로써 난삭재용 공구 코팅의 물성을 높이는 연구들이 진행되고 있다. 본 연구에서는 CrAlN 코팅과 WC-Co 6wt.% 모재 사이에 CrZrN, CrN, CrN/CrZrSiN 등의 중간층을 합성하여 CrAlN 코팅의 상온 및 고온 특성을 향상시키는 연구가 진행되었다. 합성된 코팅의 구조 및 물성을 분석하기 위해 field emission scanning electron microscopy(FE-SEM), nano-indentation, atomic force microscopy(AFM) 및 ball-on-disk wear tester를 사용하였다. 코팅의 고온 특성을 확인하기 위해 코팅을 furnace에 넣어 공기중에서 30분 동안 annealing 한 후에 nano-indentation을 사용하여 경도를 측정하였고, $500^{\circ}C$ annealing 코팅의 표면 조도 분석 및 $500^{\circ}C$에서 마찰마모시험을 실시하였다. CrAlN 코팅의 상온 특성을 분석한 결과, 모든 코팅의 경도(35.5-36.2 GPa)와 탄성계수(424.3-429.2 GPa)는 중간층의 종류에 상관없이 비슷한 값을 보인 것으로 확인됐다. 그러나, CrN/CrZrSiN 중간층을 증착한 CrAlN 코팅의 마찰계수는 0.33로 CrZrN 중간층을 증착한 CrAlN 코팅의 마찰계수(0.41)에 비해 향상된 값 보였으며, 코팅의 마모율 및 마모폭도 비슷한 경향을 보인 것으로 보아 코팅의 내마모성이 향상된 것으로 판단된다. 이것은 중간층의 H/E ratio가 코팅의 내마모성에 미치는 영향에 의한 결과로 사료된다. H/E ratio는 파단시의 최대 탄성 변형율로써, 모재/중간층/코팅의 H/E ratio 구배에 따라 코팅 내의 응력의 완화 정도가 변하게 된다. WC 모재 (H/E=0.040)와 CrAlN 코팅(H/E=0.089) 사이에서 CrN, CrZrSiN 중간층의 H/E ratio는 각각 0.076, 0.083 으로 모재/중간층/코팅의 H/E ratio 구배가 점차 증가함을 확인 할 수 있었고, 일정 응력이 지속적으로 가해지면서 진행되는 마모시험중에 CrN과 CrZrSiN 중간층이 WC와 CrAlN 코팅 사이에서 코팅 내부의 응력구배를 완화시키는 역할을 함으로써 CrAlN 코팅의 내마모성이 향상된 것으로 판단된다. 내열성 시험 결과, CrN/CrZrSiN 중간층을 증착한 코팅은 $1,000^{\circ}C$까지 약 28GPa의 높은 경도를 유지한 것으로 확인 되었다. $500^{\circ}C$ annealing 후 진행된 표면 조도와 마모시험 결과, 모든 코팅의 조도 값 및 마찰계수는 상온 값에 비해 증가하였으며 CrN/CrZrSiN 중간층을 증착한 CrAlN 코팅의 변화량이 가장 낮은 값을 보였다. 이는 CrZrSiN 중간층 내에 존재하는 $SiN_x$ 비정질상이 고온 annealing시에 산소 차폐막 역할을 하여, 코팅내의 잔류 산소에 의한 산화작용을 효과적으로 방지함으로써 코팅의 고온 특성이 향상된 것으로 판단된다.

• Journal of Life Science
• /
• v.28 no.5
• /
• pp.597-604
• /
• 2018

Although the core mechanisms of Attention Deficit/Hyperactivity Disorder (ADHD) are unknown, several ADHD-associated proteins have been studied. G-protein - coupled receptor kinase interacting protein-1 (GIT1) is a multifunctional adapter protein that affects neuron growth and dendrite formation. GIT1-deficient mice have shown ADHD-like behavior and also recovered through amphetamine treatment. In this study, gliotransmitters were investigated in both intracellular and extracellular space from GIT1-deficient mice. To measure the amount of gliotransmitters, primary astrocyte cultures were taken from the cerebral and cerebellar cortices of wild (WT), hetero (HE), and knock-out (KO) mice. Major gliotransmitters were analyzed using high-performance liquid chromatography. It was observed that the amount of excitatory and inhibitory gliotransmitters were dependent on genotype and showed a change in excitation/inhibition ratios. Interestingly, the major excitatory gliotransmitter, glutamate, existed at the lowest level in WT mice, but the amount of inhibitory gliotransmitters, gamma-aminobutyric acid (GABA) and glycine, varied depending on brain region. Remarkably, an increased amount of GABA was measured at the intracellular cerebrum in WT mice compared with KO mice. It was presumed that KO mice would secrete more inhibitory gliotransmitters to compensate for GIT1 depletion or else acquire a defect to reuptake-secreted GABA. This may be a possible mechanism for ADHD pathology.

• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.134-140
• /
• 1995

Four different mashes using traditional methods in Korea such as Andong soju, Moonbaeju, Leekangju and Jindo hongju, were prepared for distilled liquor. The changes of pH, total acid, reducing sugar, total sugar, alcohol, solid content and ${\beta}-amylase$ activities in their mashes were studied during fermentation. Ethanol content of mashes were increased to the range of $8.8{\sim}11.2%$ after 16 days of fermentation. The group which was brewed by the first addition of mash showed higher ethanol content than the other group which was not added the ones. Total acid content of mashes increased to $0.59{\sim}1.10%$. The total sugar content was decreased to $6.70{\sim}8.94%$, and that of Leekangju type was lower than that of other fermented mashes. Reducing sugar content was in the range of $0.62{\sim}6.42%$ at the initial fermentation and decreased to $0.09{\sim}0.30%$ after 16 days of fermentation. Soju was obtained by distillation of each fermented mashes using the modified traditional Togori. After distillation of mashes, pH was increased and total acid was reduced. Sugar(3.58%) and solid(1.17%) in Leekangju were found to be leached from the mixture of pear, ginger, cinnamon, honey and curcuma rhizome.