• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.119-127
• /
• 2011

The main purpose of this paper is to apply Zone 30 system which is being experimented in advanced country for the solution of controlling the residential street's speed to our country with the consideration of the real condition of our street and traffic and to run this system as an example to analyze the effect and at the same time, analyze the problem and get appropriate preparation for this system to be widespread. The area to run this model project is Goyang City Ilsan-Gu.($0.65km^2$) which is close with the commercial area reflecting the opinion of experts and an on-site verification by the National Police Agency T/F and is having a heavy pedestrian traffic and the risk of pedestrian accident. Firstly we defined residential street and residential street area to review the system and devided the residential street type to establish a plan of operation. Afterwards, we thoroughly examined the model project area and analyzed the problem and solution. We finally completed establishing a facilities by conference with a local autonomous entity with the improvement of facility's sketch at the analysis of the model project area. The result of effects analysis which we devided after and before of establishment is that vehicle speed be reduced 5~15km/h, and traffic accidents has decreased by 24 percent.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.18-35
• /
• 2020

Many human, roadway, and vehicle factors affect vehicle-pedestrian crashes. Especially, the roadway factors are easily defined and suitable for suggesting countermeasures. The characteristics of the road network are one of the roadway factors. The road network significantly influences behaviors and conflicts of drivers and pedestrians. A metropolitan city such as Seoul contains various types of road networks, and crash prevention strategy considering characteristics of the road network is required. In this study, we analyze the effects of road networks on vehicle-pedestrian crashes. In the study, high order road ratio, intersection ratio, high-low intersection ratio are considered as road network variables. Using Geographically Weighted Poisson Regression, crash frequencies in Dongs of Seoul are analyzed based on the road network variable as well as socioeconomic variables. As a result, Dongs are grouped by coefficient signs, and each group is suggested about improvement directions considering conflict situations.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.55-68
• /
• 2014

Some infrastructure these days is usually constructed under the ground for it to not interfere the foot-traffic of pedestrians, and thus, it is difficult to visually confirm the accurate location of the site where the establishments must be buried. These technical difficulties increase the magnitude of the problems that could arise from over-reliance on the experience of the worker or a mere blueprint. Such problems include exposure to flood and collapse. This paper proposes a constructor-oriented visualization system via mobile gadgets in general construction sites with occluded structures. This proposal is consisted with three stages. First, "Stage of detecting manhole and extracting features" detects and extracts the basis point of occluded structures which is unoccluded manhole. Next, "Stage of tracking features" tracks down the extracted features in the previous stage. Lastly, "Stage of visualizing occluded constructions" analyzes and synthesizes the GPS data and 3D objects obtained from mobile gadgets in the previous stages. This proposal implemented ideal method through parallel analysis of manhole detection, feature extraction, and tracking techniques in indoor environment, and confirmed the possibility through occluded water-pipe augmentation in real environment. Also, it offers a practical constructor-oriented environment derived from the augmented 3D results of occluded water-pipings.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.53-58
• /
• 2014

The global automotive radar is regulated to use the 22GHz~26GHz band. However, it plans to move to the 77~81GHz band of a broadband radar in the millimeter wave for the high resolution of pedestrian sensing and blind spot. On the other hand, the 71~275GHz band is regulated to use a radio astronomy service. The interference is predicted between an automotive radar and a radio astronomy service. Therefore, this paper analyzed the interference impact of the automotive radar on the radio astronomy service and then obtained separation distance for the protection of the radio astronomy service.

• Journal of Digital Contents Society
• /
• v.18 no.1
• /
• pp.109-114
• /
• 2017

In our modern society, the utilization of the advanced drone which is capable of performing variety of tasks has been gradually increasing. In this paper, we present an application, similar to the prototype "Skycall" that had been introduced in the MIT Senseable City. To assess this concept, we have implemented a prototype of drone-based pedestrian navigation depending on the Android smartphone. Our system is not only able to guide the user in a very complicated place, where buildings are compacted, but also to block unauthorized visitors from accessing the facilities. And we discuss some problems we found and suggest the direction to address them.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.710-713
• /
• 2011

본 논문에서는 교량의 주부재에 교량용 고성능강을 적용하여 설계해 본 후, 이러한 적용이 교량의 진동사용성에 어떠한 영향을 미치는지 그 영향을 분석해 보고자 한다. 최근들어 교량상의 구조적인 결함이 없더라도 진동에 의해 교량을 통행하는 운전자나 보행자에게 불안감을 주는 경우가 빈번히 발생하기 때문에 진동사용성이란 문제는 보다 부각되고 있다. 특히 고성능강이 개발되고 이를 교량에 적용하게 되면 허용응력의 증가로 이어져 거더의 형고감소를 가능하게 한다. 그러나 이러한 형고의 감소는 교량의 휨강성을 저하시켜 사용성의 악화를 초래할 것이란 예측이 있었다. 따라서 본 연구는 차량-교량의 상호작용에 의해 발생하는 진동영향의 분석을 위해 유한요소해석 프로그램인 Abaqus 6.10을 이용해 수치해석을 수행하였고 이때의 진동영향을 평가했다. 차량-교량 상호작용의 해석을 위해 ASSHTO 기준의 HS 20-44 차량을 해석 대상교량 위로 주행하도록 하였다. 해석대상교량은 인장강도가 각각 600MPa와 800MPa인 교량용 고성능강재(HSB, High-Performance Steel for Bridge)를 적용하여 주거더를 설계한 강플레이트 거더교를 대상으로 삼았다. 차량이 교량을 통과하면서 발생하는 교량의 경간 중앙부에서 발생하는 수직진동의 시간이력을 분석하여 진동평가의 기준으로 삼았다. 해석결과 HSB600과 HSB800으로 각각 설계된 교량은 가속도이력에서는 큰 차이가 없었으나 변위이력에서는 HSB800적용 교량이 진동사용성 측면에서 매우 불리한 거동을 보였다. 따라서 고성능강 적용에 따른 교량의 진동사용성을 평가하기 위해서는 변위를 기준으로한 평가가 이루어져야하며, 변위의 진동을 제어하기 위한 방안이 모색되어야 할 것으로 판단된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.862-864
• /
• 2013

Recently unstable weather condition has been going on then the damage by heavy rains, typhoons and stream flooding has been increasing continuously. In particular, the urban damage by flooding of rivers or roads has been occurred frequently. It could block all the transportation facilities within cities for restricting traffic. In this study, we suggest the method of utilization of the information about event and accident on roads through the real-time traffic information to cope with dangerous situation of roads.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.562-565
• /
• 2017

본 연구는 일상에서 길을 찾는 데 어려움을 겪은 보행자나 초행길을 낯선 여행자들을 대상으로, 스마트폰과 더불어 사람들이 많이 지니고 다니는 가방을 가지고 적용하였다. 스마트폰의 LBS, 블루투스 기능과 가방에 부착된 진동 인터페이스가 연결되어 실시간 경로 안내를 받을 수 있는 제품이다. 부가적인 기능으로는 앱 상에 회원관리 기능이 있어 개인의 이용 기록에 관한 데이터가 DB에 저장되며 DBMS를 통한 데이터 분석으로 사용자에게 맞춤화된 서비스를 제공해 줄 수 있다. 또한 여러 사용자들이 이용한 플랫폼에 쌓인 데이터를 가지고 새로운 비지니스를 창출할 수도 있다. 추가적으로 일정 거리 이상 멀어지면 신호의 강도가 약해지는 블루투스의 특성을 이용하여 이용자가 가방과 일정 거리 이상 떨어질 경우, 스마트폰으로 팝업 창을 띄워주는 형태로 분실 방지 기능을 제공해 줄 수도 있다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.5
• /
• pp.490-498
• /
• 2011

In this paper, we present a two-stage vision-based approach to detect multi views of pedestrian in road scene images. The first stage is HG (Hypothesis Generation), in which potential pedestrian are hypothesized. During the hypothesis generation step, we use a vertical, horizontal edge map, and different colors between road background and pedestrian's clothes to determine the leg position of pedestrian, then a novel symmetry peaks processing is performed to define how many pedestrians is covered in one potential candidate region. Finally, the real candidate region where pedestrian exists will be constructed. The second stage is HV (Hypothesis Verification). In this stage, all hypotheses are verified by Support Vector Machine for classification, which is robust for multi views of pedestrian detection and recognition problems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.106-115
• /
• 2007

In this study, first, child headform model was built up, satisfying requirement in the headform validation test. Also, for decreasing both acceleration peak and deformation, a new hood with dome shaped forming in inner panel was investigated. Next, headform impact, complying with draft of EEVC W/G 17, on the central portion of the newly proposed hood were simulated for a steel hood and three aluminum hoods with different thickness for examining the material and thickness effect on HIC value and inner panel deformation. The analysis results explained that aluminum hoods with dome shaped forming in inner panel were highly promising not only for meeting headform safety regulations but also for leading to weight savings. Finally, hood edge design technology in order to reduce pedestrian injury due to the high stiffness of beam type edge and the rigid support, was discussed. Various types of the foam filled edge were designed and their headform safety performance were evaluated. The edge structure with foam filled in upper one third of section exhibited excellent results.