• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.293-294
• /
• 2009

정밀한 관측을 요하는 측량장비의 기능을 보정하거나 검증하는 것은 측량시 매우 중요한 일이다. ISO17123-8 규격은 GNSS RTK 정확도를 결정 할 때 사용되는 야외실험 절차와 규정을 명시하고 있으며 정확도 평가방법으로는 약식시험절차와 엄밀시험절차를 제시하고 있다. 본 연구에서는 GNSS RTK 정확도 평가방법 중 엄밀시험절차에 대해 시험할 목적으로 GNSS RTK 규격에 따라 Test-bed를 구축하였고 성능실험을 실시 위하여 GNSS RTK 규격에 제시된 정확도 평가방법을 적용하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.234-234
• /
• 2016

본 연구에서는 기상청 RCM으로부터 생산된 미래 이슬점자료를 이용하여 편의보정 및 시간적인 규모내림방법의 적용에 있어서 그동안 간과하고 있었던 사항들을 살펴보고, 그러한 부분들에 대한 보완방법을 100년 빈도 12-시간 지속 이슬점 산출과정을 대상으로 제안하고자 한다. 우선 기후모델로부터 도출된 자료와, 관측된 자료 사이의 일치성 여부를 먼저 확인하기 위해 기후모델로부터 도출된 자료를 이용하여 과거 관측자료와의 재현성을 평가한다. 또한 기후모델의 여러 가지 한계로 인해 생기는 불일치성을 극복하기 위해 편의보정이라는 절차를 수행하여 모델로 부터 도출된 미래 기후자료를 보정하게 된다.본 연구의 경우 5월부터 10월까지의 자료를 대상으로 매월 1-15일 시기와 16-말일로 나누어 총 12개의 시기별, 지점별(62개 지점)별로 편의보정을 수행하였다. 또한 편의보정 되어진 이슬점 자료를 바탕으로 scale-invariance 기법을 적용하여 일-단위 이슬점자료로부터 시간-단위 이슬점 정보를 추출하였다. 먼저 62개 지점별로 1981-1997년(보정기간) 17년 동안의 과거관측자료를 이용하여 시기별 일 이슬점자료로부터 시기별 12-시간 지속 100년 빈도 이슬점을 산출하는 함수관계를 구축한 후 이를 이용하여 1998-2014년(검증기간) 17년 동안의 시기별 일 이슬점 자료로부터 시기별 12-시간 지속 100년 빈도 이슬점을 산출하여, 실제 검증기간의 시간자료를 이용한 12-시간 지속 100년 빈도 이슬점과 비교해 보았다.

• Nuclear Engineering and Technology
• /
• v.24 no.3
• /
• pp.236-242
• /
• 1992

The characteristics of dynamic terms in the core overtemperature Delta-T trip function are investigated for various time constants and the effects on the trip setpoint are studied for the uncontrolled RCCA bank withdrawal at power event by using the NLOOP and the PUMA code. Based on this study, a procedure determining the optimal dynamic term is suggested and accordingly the optimum time constants are determined for the KORI 3&4 transition core. It reveals that the vessel average temperature-lead-lag term is the most sensitive in DNB trip setpoint and the optimized time constants are 21 seconds for lead and 4 seconds for lag.

• Information and Communications Magazine
• /
• v.18 no.6
• /
• pp.46-57
• /
• 2001

본 논문은 IMT-2000 이동통신 표준인 cdma2000 환경에서 라그랑제(Lagrange)승수를 이용한 알고리즘을 이용하여 설계한 스마트안테나 시스템을 성능 분석하였다. 본 논문에 적용한 수신안테나 시스템은 기존의 2 안테나 다이버시티(2-antenna diversity) 시스템과는 달리 선형배열안테나를 이용하여 각 안테나 소자에 대한 위상보정을 통해 최적의 수신이득을 얻는 시스템이다[1]. 본 논문에서는 안테나위상의 보정을 위해 수신신호의 자기상관행렬의 최대 고유치에 해당하는 고유벡터를 계산하는 절차를 거치며 이를 위해 라그랑제승수(Laglange Multiplier)에 기초한 알고리즘을 사용하였다[2]. 이렇게 구현된 스마트안테나 시스템을 변조심볼(Mudulation Symbol)의 SER(symbol error rate)에 대한 성능분석을 통해 cdma2000 데이터채널의 수용용량을 제시함으로써 시스템의 성능을 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1920-1921
• /
• 2007

본 논문에서는 나선주사 영상에서 발생하는 off-resonance 현상에 의한 영상의 번짐을 보정하는 새로운 알고리즘을 제안하였다. 공간상에서의 inhomogeneity와 chemical-shift 현상으로 생기는 off-resonance 효과는 공간의 자장의 세기에 비례한다. 현재 사용되고 있는 보정 방법에서의 절차를 간소화 하고 보다 효과적인 보정 알고리즘을 적용함으로써 보다 나은 Spiral scan 영상을 얻고자 하였다.

• The Korean Journal of Applied Statistics
• /
• v.24 no.6
• /
• pp.1225-1235
• /
• 2011

This paper suggests a method for tuning a numerically simulated wind speed data, provided by NIMR(National Institute of Meteorological Research) and generated from a numerical meteorological model to improve a wind resource map with a $1Km{\times}1Km$ resolution. To this end, "tuning factor method" is developed that consists of two procedures. First, estimate monthly wind fields based on a suitably designed statistical wind field model that covers 345,682 regions obtained by $1Km{\times}1Km$ lattice sites in South Korea. The second procedure computes the tuning factor and then tunes the generated wind speeds of each month as well as each lattice site. The second procedure is based on the wind fields estimated by the first procedure. The performance of the suggested tuning method is demonstrated by using two wind data(both TMY and numerically simulated wind speed data) of 75 weather station areas.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.213-222
• /
• 2008

Although hyperspectral sensing data have shown great potential to derive various surface information that is not usually available from conventional multispectral image, the acquisition of proper hyperspectral image data are often limited. To use ground-based hyperspectral camera image for remote sensing studies, radiometric calibration should be prerequisite. The objective of this study is to develop radiometric calibration procedure to convert image digital number (DN) value to surface reflectance for the 120 bands ground-based hyperspectral camera. Hyperspectral image and spectral measurements were simultaneously obtained from the experimental target that includes 22 different surface materials of diverse spectral characteristics at wavelength range between 400 to 900 nm. Calibration coefficients to convert image DN value to at-sensor radiance were initially derived from the regression equations between the sample image and spectral measurements using ASD spectroradiometer. Assuming that there is no atmospheric effects when the image acquisition and spectral measurements were made at very close distance in ground, we were also able to derive calibration coefficients that directly transform DN value to surface reflectance. However, these coefficients for deriving reflectance values should not be applied when the camera is used for aerial image that contains significant effect from atmosphere and further atmospheric correction procedure is required in such case.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.103-118
• /
• 2012

A distributed model can easily obtain discharge at any grids spatially distributed in a watershed. But if there are subwatersheds which have various characteristics in a watershed, it is needed to apply a model calibrated at each subwatershed to obtain reliable simulation results for each subwatershed. In this study, a multi-site calibration module that can calibrate a distributed model at each subwatershed using observed flow data was developed. Methods to select multi-site calibration parameters, to apply subwatershed parameters, and to set subwatershed network information are suggested. Classes to implement multi-site calibration technique are designed and a GUI was developed, and procedures for runoff modelling using subwatershed parameters were established. Multi-site calibration module was applied to Sunsan watershed($977km^2$) of Nakdong river basin. Application results showed that the multi-site calibration technique could be applied effectively to model the calibration for each subwatershed, and the simulation results of subwatershed were improved by the application of multi-site calibration.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.1
• /
• pp.28-37
• /
• 2022

Along with the remarkable advances in GNSS technology, SBAS further enhances the accuracy and integrity of GNSS location information and derives improvement in the safety and efficiency of air traffic management from reducing GNSS location errors, induced by passing through the ionosphere and atmosphere, to less than three meters. In this regard, ICAO specifies the standards of SBAS signals and recommends every party to phase in by 2025; and it is foreseeable that SBAS APV-I and CAT-I will be provided in South Korea by its undertaking the development of KASS, a Korean SBAS. The purpose of the study is to design SBAS APV-I procedure on the basis of the runway 15L of Incheon International Airport and conduct obstacle assessment according to PAN-OPS Doc. 8168, focusing on the usability and usefulness of SBAS APV-I. The results show that SBAS APV-I will provide better decision height compared to other PBN RNP approach procedures such as LNAV and Baro-VNAV at the Incheon International Airport.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.46-52
• /
• 2024

Engine test cell should provide controlled test environment to properly verify requirements of engine performance and operational characteristics. However, since test cells cannot be perfectly identical to each other, new test cell requires processes to verify reliability of test results and correct differences through correlation testing using a baseline test cell. This paper studies about what should be considered when correlation testing is performed based on commonalities and differences between turbofan and turboshaft engine. It provides examples of correlation test procedure. In the future, it is expected that this study will help set up a standard that can certify test facility according to engine type.