• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.99-109
• /
• 2010

Existing research about automated wafer transport management strategy for semiconductor manufacturing equipment was mainly focused on dispatching rules which is optimized to specific system layout, process environment or transfer patterns. But these methods can cause problem as like requiring additional rules or changing whole transport management strategy when applied to new type of process or system. In addition, a lack of consideration for interconnectedness of the added rules can cause unexpected deadlock. In this study, in order to improve these problems, propose dynamic priority based transfer job decision making algorithm which is applicable with regardless of system lay out and transfer patterns. Also, extra rule handling part proposed to support special transfer requirement which is available without damage to generality for maintaining a consistent scheduling policies and minimize loss of stability due to expansion and lead to improve productivity at the same time. Simulation environment of Twin-slot type semiconductor equipment was built In order to measure performance and examine validity about proposed wafer scheduling algorithm.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.593-599
• /
• 2023

There is risk of derailment due to various factors such as vehicle-track load imbalance in curved parts, so urban railways install and operate derailing prevent guard rails. The angle-type derailing prevent guard rail is composed of various parts including the guard angle. Even if derailment does not occur, various damages occur in the components, so continuous maintenance is required. Through the damage status analysis, the components of the angle-type derailing prevent guard rail with high damage frequency were classified, and conditions for the occurrence of various damages were investigated. In addition, a numerical analysis using a precise 3D numerical model was performed to analyze the cause of the damage analytically. In order to analytically simulate the derailment situation, the static ultimate load condition was applied, and the actual drawing of the angle-type derailing prevent guard rails, rails, and wheels was used for modeling. By analyzing the results of the damage status investigation and finite element analysis, we tried to investigate the damage of the components.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4A
• /
• pp.497-505
• /
• 2008

Corrugated steel webs resist only shear force because of the accordion effects. The shear force in the web can cause three different buckling mode: local, global, and interactive shear buckling modes. The shear behavior of the corrugated steel webs have been investigated by several researchers. However, shear buckling behavior of the corrugated webs are not clearly explained yet. And, it lead the conservative design. This paper presents shear strength of trapezoidally corrugated steel webs. A series of the tests were also conducted to verified proposed shear strength. Firstly, local, global, and interactive shear buckling equations provided by previous researchers were rearranged as a simple form considering the profiles of the existing bridges with corrugated steel webs. And, global and interactive shear buckling coefficient, and shear buckling parameter for corrugated webs were suggested in this study. Inelastic buckling strength can be determined from buckling curves based on the proposed shear buckling parameter. From the test results of this study and those of previous researchers, it can be found that suggested shear strength provides good estimation of those of trapezoidally corrugated steel webs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.73-79
• /
• 2006

A major purpose of this study is to develop high modulus asphalt mixtures for perpetual asphalt pavements which can save maintenance cost by increasing the design and performance periods of the pavements. Various physical and mechanical laboratory tests are performed for the high modulus asphalt binder developed in this study. The test results show that the properties of the high modulus binder are similar to those of the French high modulus binders. In addition to the binder tests, various performance tests are conducted for the high modulus and conventional mixtures. The dynamic modulus test results indicate that the dynamic modulus values of the high modulus mixtures are higher than those of the conventional mixtures by 10~15% at $5^{\circ}C$, 20~25% at $15^{\circ}C$ and 100% at $30^{\circ}C$. It is observed from the performance tests that the high modulus mixtures yield better fatigue, rutting and moisture damage performance than the conventional mixtures.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.371-371
• /
• 2022

하천관리지리정보시스템(RIMGIS)은 하천정보의 표준화 및 전산화를 통한 정보제공과 하천에 관련한 업무를 지원하기 위해 개발된 시스템으로 5개의 지방국토관리청에서 관리하고 있는 하천대장 및 부도, 구조물도 등의 다양한 하천 관련 정보를 정보화하여 인허가 및 하천기본계획 등의 하천업무를 신속하고 효율적으로 수행할 수 있도록 운영되고 있다. 국가 주요 기반시설을 생애주기 관점에서 관리하고 소요재원의 확보근거를 마련하고자 "지속 가능한 기반시설 관리 기본법"이 제정되었고 최근에 시행되었다. 이에 따라 국토안전관리원에서는 도로·철도·철도 하천 등과 같은 사회기반시설(15종)의 노후화에 대비하여 전략적인 투자와 관리방식 도입을 목적으로 인프라 총조사 사업을 진하천 등과 같은 사회기반시설(15종)의 노후화에 대비하여 전략적인 투자와 관리방식 도입을 목적으로 인프라 총조사 사업을 진행하고 관리를 위해서 기반터 시스템을 도입하였다. 하천관리지리정보시스템과 기반터 시스템은 하천 기반시설의 정보가 데이터베이스에서 다뤄진다는 점에서 유사하지만, 기반터 시스템은 하천관리지리정보시스템과 달리 유지관리 측면에 대한 필요한 보수 주기, 필요 예산 등과 같은 정보를 산정할 수 있도록 프레임워크가 구성되어 있다. 그러나 하천과 기반시설의 코드를 연결하는 작업들은 현재 상황에서는 미흡한 실정이고, 유지관리와 시설물의 노후화를 가속화하는 홍수와 침수피해 등을 전체적으로 고려할 수 있는 방안에 대한 연구도 미진한 상황이다. 이에 본 연구에서는 하천 기반시설의 유지관리를 위해 하천, 제방, 인명에 대한 위험지수를 고려한 잠재 인명피해 위험도와 잠재 홍수피해 위험도를 평가기준으로 설정하고 적용하였다. 또한 이를 포함시킨 투자우선순위 평가기법을 도입하여 감가상각과 위험요소 등을 고려할 수 있는 데이터베이스 구성 방안을 제시하고자 한다.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.171-178
• /
• 2023

In this paper, we propose a smart automated warehouse to maximize space utilization. Previous elevator-type automatic warehouses were designed with a maximum payload of 100kg on trays, which has the problem of extremely limiting the number of pallets that can be loaded within the space. In this paper, we design a smart warehouse that can maximize space utilization with a maximum vertical stiffness of 300kg. As a result of the performance evaluation of the implemented warehouse, the maximum payload was 500.6kg, which satisfied the original design and requirements, the lifting speed was 0.5m/s, the operating noise of the device was 67.1dB, the receiving and forwarding time of the pallet was 36.92sec, the deflection amount was 4mm, and excellent performance was confirmed in all evaluation items. In addition, the PLC control method, which designs the control UI and control panel separately, was integrated into the PC system to improve interoperability and maintainability with various process management systems. In the future, we plan to develop it into a fully automatic smart warehouse by linking IoT sensor-based logistics robots.

• Journal of Industrial Convergence
• /
• v.22 no.6
• /
• pp.1-11
• /
• 2024

This study aims to examine the mediating effect of job satisfaction on the relationship between working conditions, including wages, employment status, working hours, tenure, and turnover intention among social welfare workers. To achieve this, path analysis was conducted using SPSS and AMOS with data from the 2020 Survey on Compensation Levels and Working Conditions of Social Welfare Facility Workers conducted by the Ministry of Health and Welfare and the Korea Institute for Health and Social Affairs. The direct and indirect effects of variables were verified and compared. The analysis results revealed that job satisfaction among social welfare workers showed a complete mediating effect in the relationship between wages, working hours, and turnover intention, while it showed a partial mediating effect in the relationship between employment status, tenure, and turnover intention. Based on these findings, the study proposes measures to reduce turnover intention among social welfare workers, such as ensuring employment stability, managing job satisfaction based on tenure, and enhancing job satisfaction through wage and working hour management.

• Journal of Navigation and Port Research
• /
• v.48 no.1
• /
• pp.1-6
• /
• 2024

Aid-to-Navigation facility is important for maritime traffic safety. In Korea, for safe maritime traffic, the Ministry of Oceans and Fisheries is using an Aid-to-Navigation management system. The current Aid-to-Navigation management system displays information based on text, making it difficult to determine the impact if Aid-to-Navigation fails or an accident occurs. A simulator can be used to verify the placement of Aid-to-Navigation. However, real-time information is not applied and maintenance of the simulator is expensive. Additionally, the Aid-to-Navigation simulator cannot simulate effects of port backlighting. To improve these issues, we proposed an Aid-to-Navigation management platform based on digital twin technology. This system can predict failures by analyzing real-time sensor data collected from navigation signs. We plan to develop a function that can simulate Aid-to-Navigation placement. Aid-to-Navigation is expected to be managed efficiently by applying digital twin technology.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.139-148
• /
• 2008

The direct inspection of the outward aspects by field engineers is the important and critical part for structural safety assessment according to the related reports. This study presents an improved method of the state assessment for concrete floor slab by separating and evaluating the individual damage types. First, the various types of damage symptoms are separated, which have been included and dealt in a group. Secondly, they are weighted and scored independently based on the present guide and references. Overall procedures other than the above are retained as same as possible to avoid the confusion. The proposed method is applied and tested to a performed assessment project for a bridge for validation. The result shows that it is reasonable and applicable in respect that it is able to make up for the controversial points of the present guide revealed in practices. Careful check of excessively deteriorated parts in addition to the reasonable assessment of system by this method grants the structural repair and reinforcement propriety and economy, and assures of more safety. Twofold appraisal of this approach expands the applicable areas of value engineering to the structural maintenance.

• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.219-226
• /
• 2015

The objective of this research was to investigate the influence of various root media on the growth of mother and daughter plants during propagation and early yield after transplanting of 'Seolhyang' strawberry. To achieve this, daughter plants were fixed to connected small pots that contained expanded rice-hull (ERH), a strawberry-specialized commercial medium (SSCM), soil mother materials (SMM), or loamy sand (LS). Then, growth of daughter plants in above- and below-ground tissue as well as early yield after transplanting to plastic house soil were investigated. The growth of daughter plants in terms of plant height, leaf area and fresh weight were the highest in the SSCM treatment. Root growth in terms of the amount of primary roots and root dry weight were the highest in the treatments of ERH and SMM and the lowest in that of SSCM, among treatments tested. The ERH treatment also showed the highest values among treatments in root length, surface area and volume when roots with 0 to 0.4 mm in diameter were investigated. The flower bud differentiation of daughter plants began on Sept. 3 in the ERH treatments, earlier than the SMM (Sept. 5) and in SSCM (Sept. 7) treatments. The tissue N contents of daughter plants were in the range of 1.41 to 1.55% in all treatments, and no significant differences were observed among treatments. This indicates that the low moisture retention capacity of ERH and water stress, rather than tissue N contents, promote the flower differentiation of daughter plants. In the evaluation of early yield after transplant, the ERH treatment of showed the highest yield in the period from November to December, reaching 667 g fruit weight per 10 plants. The yields per 10 plants in the other treatments were 581 g in SMM, 475 g in SSCM and 295 g in LS. Above results imply that the various root media have different effects on the growth of daughter plants as well as flower bud differentiation. Therefore, improvement in early yield after transplant can be achieved through selection of proper root medium for daughter plant propagation.