• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.629-632
• /
• 2008

In the concrete repairing industry, it's very significant to apply adequate repair materials and construction method in order to extend service life of deteriorated concrete structure efficiently. also, adequate diagnosis of deteriorated structure's status should be involved. This paper describes an investigation of bond strength of polymer modified mortar applied both old deteriorated concrete surface substrate and well cured new concretes. The purpose of this investigation is comparing how much the tensile bond strength on construction site is different from laboratory test results. in the results of investigation, most of sample tested in laboratory is in compliance with KS F 4042's specification. and most of results of construction site are not in compliance with the specification cause of low tensile strength of concrete's surface.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.603-610
• /
• 2017

Various type of pavement deterioration such as crack, bumpy, pothole is rapidly increasing according to the accelerated environmental changes like heavy rainfall, frequent snowing, difference temperature, etc. Accident related to pothole that cause fatal traffic accidents has been increased more than five times over the next five years starting from 2008. As direct or indirect damage by pothole which caused injuries and car damages increases every year, quicker and more efficient management measures are necessary. This study presents the algorithm for materials quantity take-off. The algorithm was suggested by correlation in pothole size and area. Suggested algorithm were confirmed the validity through the 15 field survey in capital area. According to the results of survey, usually the residual materials at which 5~7 kg was generated decreased to 1~2 kg. It showed that automatic pothole detection system is expected not only to reduce materials and resources, but also to contribute to quality improvements of pavement through more accurate material take-off from the situation of constructing rely on their own judgement.

• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.59-67
• /
• 2012

This study presents the evaluation of the patching materials that are used to repair the distress of asphalt pavement. Four kinds of patching materials currently used in practice were tested in both laboratory and field. The laboratory tests included the dry and soaked Marshall stability test, indirect tensile test, wheel tracking test and adhesive strength between the asphalt pavement and the repairing material was tested as a performance test. The field study was conducted using the slab samples placed on the location of vehicle tire passing and the performance of the repairing materials were investigated as passing the traffic load. The result of the laboratory tests were satisfied with the current design criteria and material standard except for water-immersion stability. Type C patching material showed the highest adhesive shear strength among the patching materials tested. However, the mature distress, such as rutting and stripping were monitored after construction in 10 days. It was found that performance of patching material is lack of quality behavior when they were applied in the field and required to develop and applu to prevent the mature distress of the current patching materials.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.152-161
• /
• 2024

This paper investigates the manufacturing and fundamental quality characteristics of potassium magnesia phosphate-based non-cement high-volume fly ash repair mortar. To derive the optimal mix for non-cement mortar, the manufacturing characteristics were evaluated based on the magnesia ratio, and the mortar manufacturing characteristics were assessed with the fly ash mixture. Additionally, the non-cement magnesia repair mortar was produced considering the effects of fly ash mixture and basalt fiber. The evaluation results determined the optimal mix of non-cement magnesia repair mortar, and the feasibility was examined through workability and fundamental quality assessments. The optimal magnesia ratio was found to be P:M 1:0.5, with W/B at 30 %. It was also confirmed that mixing FA and basalt fiber improves fiber dispersion and workability. Even with over 50 % FA mixture, the target strength was achieved within six hours, with a flow increase of up to 18 % and a flexural strength decrease of about 1-2 MPa.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.672-684
• /
• 2016

UIC Codes 714R & 715R recommend the use of line classifications and their usage in maintenance work by employing notional traffic loads. However, the classification has not been applied to local lines and, therefore, a new line classification system based on UIC 714R has been proposed in this study. For this, various classification models of UIC, Germany, and UK have been studied first and equivalent traffic loads based on Korail's report, as well as on train timetables, have been derived. The results of the classifications have been compared with those of major European countries and it has been shown that the proposed classification is equivalent to the average value in the European cases. The line classification can be fully utilized during the decision making process of maintenance work and will also be used to model the Reliability Centered Maintenance (RCM) in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1125-1131
• /
• 2016

The purpose of this paper is to establish an evaluation criteria for pavement condition in bicycle road. The suggested criteria would help in the activation policy of bicycle use. The conventional evaluation criteria is difficult to be applied for the bicycle road since the bicycle road is sensitive to changes in the driving environments such as obstacles and bumps. This study presents the evaluation criteria that is suitable for bicycle road. The criteria was suggested in 5 grades through the impact acceleration range of RMSI (Road Monitoring System using ICT). The grades of the criteria are divided into a range of grade A to E. The grade A is a very good condition, while the grade E is a state that requires immediate maintenance. This study were confirmed the validity through the survey of user's satisfaction. According to the results of survey, the grade A was shown correlation of 91%. The grade E requiring immediate repair was presented correlation of 94%. It showed that the results of surveying the bicycle road users are highly correlated with the suggested criteria for pavement condition. It showed that the criteria are highly correlated with the survey results. Suggested criteria using the RMSI is expected to be effective for maintenance of the bicycle road. In addition, it is expected to ensure the serviceability and safety for the bicycle users.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.1
• /
• pp.17-22
• /
• 2011

Based on the form of the Tsai-Hill criterion, a new failure criterion for anisotropic material subjected to combined stress is developed and demonstrated. It is capable of accurately calculating the strength of anisotropic materials. The generality and accuracy of the present failure criterion are illustrated by examination through the use of Kraft paperboards under various loading conditions. Compared to the Tsai-Hill theory, which is much too conservative at high levels of shear stress, the present criterion has a good agreement with the experimental data. It also has the ability to calculate the strength more simply, compared to the Tan-Cheng theory.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.412-413
• /
• 2007

정보시스템의 개발 및 유지보수에 대한 기준은 과기처 등에서 제정한 'S/W 개발비 산정기준'을 준용하고 있다. 그러나 본 기준이 Business Computing 환경을 기준으로 작성되었고, 전력계통 제어를 비롯한 각종 공정제어시스템 구축 환경에 부적합할 뿐 아니라 시스템의 뼈대(Frame)를 구성하는 H/W의 규모 산정이 누락되어 있는 상태이다. 전력거래소는 우리나라의 전력계통 환경에 적합한 한국형 에너지관리시스템(이하 K-EMS)의 국산화 개발을 각종 첨단 S/W의 탑재 기준에 따라 단계별(Baseline, Prototype, Fullscale)로 추진하면서, 각 단계에 가장 적합한 하드웨어의 용량 산정 기준을 선정하는 작업을 진행하고 있다. 이는 정보시스템 개발에서 자원의 낭비를 최소화하고 전체 개발비용을 절감 할 수 있다는 점에서 매우 중요하다. 본 연구에서는 K-EMS 시스템 국산화 개발을 위해 K-EMS가 수용할 각종 응용프로그램별 특성을 감안한 하드웨어의 적정 용량 산정 기준과 적용방안을 제시하고, CPU, Memory 등 세부 항목에 대한 고려항목을 언급함으로써 최적의 K-EMS 하드웨어 Sizing 산정방안을 소개하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.378-378
• /
• 2018

우리나라의 다목적댐 저수지 운영기준은 홍수기에 발생한 유입량에 의존하고 있으며 최근들어 빈번하게 발생하고 있는 가뭄으로 현재 기준으로는 안정적 용수공급을 하기 힘든 상황이다. 이러한 가뭄에 의한 용수부족을 사전에 대비하기 위해 국토교통부에서는 댐 용수부족 대비 용수공급 조정기준을 제시하였다. 기준에 의해 가뭄시 다목적댐에서는 4단계의 가뭄단계(관심, 주의, 경계, 심각)로 관리되며 용수제한공급이 시행된다. 하지만 가뭄단계 해제시 다소 보수적인 기준으로 인해 용수제한공급으로 인한 피해를 최소화하기 위해 가뭄단계별 해제기준을 개발하였다. 본 연구에서는 AR5 RCP 4.5/8.5 26개 시나리오를 분석하여 기간신뢰도와 공급신뢰도를 산출하고 하위 시나리오와 median 값을 가지는 시나리오를 선정하여 해제기준을 적용하였다. 기간 공급신뢰도, 회복도 및 취약도와 추가공급가능량 및 용수 추가공급가능일수를 통해 용수공급능력을 평가하였다. 시나리오별로 용수공급 실패기간 유지일수에 따라 기간 공급신뢰도와 회복도 및 취약도가 상이하게 분석되어 향후 미래 기후변화시나리오 적용 분석시 적절한 기후변화 시나리오의 선정이 필요할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.30-30
• /
• 2021

우리나라 수리시설물 중 30년 이상 경과된 수리시설물은 전체의 61%를 차지하며, 특히 저수지의 경우 저수지의 약 84% 정도는 50년 이상 된 노후 저수지로 분류되고 있어 지속적인 보수·보강 필요하며 향후 기후변화에 취약할 것으로 예상된다. 이수측면에서 설계기준이 되는 설계한발빈도는 농업용 저수지의 내한능력을 나타내는 것으로 수리시설의 규모를 결정하는 기준이 된다. 국내의 경우 1982년 농지개량사업계획 설계기준 댐편에 한발빈도 10년 기준을 채택하여 사용되고 있으며, 현재 농업용 저수지의 이수안전도는 한발빈도 설계기준을 대신하여 사용하고 있다. 농업용 저수지의 이수안전도는 기존 설계기준에 의한 물수지법에 따른 저수지의 설계빈도로 산정되어 기후 및 영농변화, 용수수요의 변화, 농법의 변화 등 현장의 물관리 여건을 반영하는데 한계가 있다. 실제 저수지의 이수능력은 한발빈도 설계기준으로 대변되는 공급가능량 및 평야부 용배수로의 형상에 따라 농업용수 공급역량이 상이하므로, 평야부를 포함하는 농촌유역, 농촌공간의 이수안전도 개념이 도입되어야 한다. 또한 국가의 유관기관들은 특성 및 용도에 맞는 용수공급 정보를 생산하여 모니터링 자료를 제공하고 있지만, 실제 현장에서 체감하는 물 부족 및 이수관련 문제 해결을 위해 현장기반 데이터 활용이 필요하다. 본 연구에서는 기존 경험에 의한 관행적인 물관리 자료, 저수지 관련 계측 자료, 위성영상 자료, 비정형 미디어 데이터 등 이수 관련 분야의 빅데이터를 통합 구축하여 농촌유역 이수안전도의 개념을 정의하고자 한다.