• Journal of Broadcast Engineering
• /
• v.4 no.2
• /
• pp.127-133
• /
• 1999

The conventional fractal image compression based on discrete wavelet transform uses the fixed block size in fractal coding and reduces PSNR at low bit rate. This paper proposes a fractal image coding based on discrete wavelet transform which improves PSNR by using variable block size in fractal coding. In the proposed method. the absolute values of discrete wavelet transform coefficients are computed. and the discrete wavelet transform coefficients of different highpass subbands corresponding to the same spatial block are assembled. and the fractal code for the range block of each range block level is assigned. and then a decision tree C. the set of choices among fractal coding. "0" encoding. and scalar quantization is generated and a set of scalar quantizers q is chosen. And then the wavelet coefficients. fractal codes. and the choice items in the decision tree are entropy coded by using an adaptive arithmetic coder. This proposed method improved PSNR at low bit rate and could achieve a blockless reconstructed image. As the results of experiment. the proposed method obtained better PSNR and higher compression ratio than the conventional fractal coding method and wavelet transform coding.rm coding.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.48-55
• /
• 2018

The purpose of the present study is to compare the reduction rate of natural frequency and the increase rate of damping parameter with structural damage in system. For this purpose, experiment and numerical simulation analysis are performed for the 2-span H-Beam with lower natural frequency and higher damping parameter from free vibration in structure. The response signal by impact load before and after damage is analyzed at 14 locations. The response signals for all locations are performed fast fourier transform to estimate the natural frequency reduction rate and wavelet transform to estimate the damping parameter increase rate. The time domain function corresponding to each scale(frequency) is separated from the response signal by wavelet parameter. The estimation of damping parameter increase rate using wavelet transform is more sensitive than the estimation of natural frequency reduction rate in structure.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.18-20
• /
• 2014

본 논문에서는 스크린 컨텐츠 동영상의 효율적인 압축을 위한 부호화 기법을 제안한다. 제안 부호화 기법은 RGB 색 요소 간의 신호의 통계적 중복성을 줄이기 위한 적응적 색 변환 기법에 기반한다. 기존의 색 변환 기법들은 스크린 컨텐츠 동영상이 포함하는 신호의 급격히 변화하는 ?계적 특성에 적용하기 어려운 반면 제안 방식에서는 부호화 블록의 시간적/공간적 주위 픽셀의 정보를 이용한 성분 분석을 통해 색 공간 변환 행렬식을 유도하여 부호화에 사용한다. 주위 픽셀 정보는 부호화 블록의 예측 방식에 따라 결정하며 움직임 벡터를 이용한 시간/변위 예측 부호 방식에서는 참조 블록의 정보를 이용하고 공간적 예측 방식에서는 블록의 인접 픽셀를 이용한다. 부호기 측에서는 비트율-왜곡 최적화를 통하여 예측 후 잔여신호의 부호화를 원래의 RGB 공간에서 수행할지 또는 색 변환한 공간에서 수행할지를 결정하고 관련 정보를 표시하여 블록 단위로 전송함으로써 부호화 효율을 증대한다. 실험에 의하면 제안 기법은 기존 압축 방식 대비 탁월한 부호화 성능을 제공함을 보인다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1095-1100
• /
• 2003

The wavelet transform pair used simultaneously when two wavelets are designed to form an approximate Hilbert transform pair provide excellent property than present DWT(discrete wavelet transform), especially in field that detect wide-band signals like pulse and increase the bit rate at the same bandwidth. In this paper, the two dyadic wavelet bases which form an approximate Hilbert transform pair were designed, and flat delay filter which has the truncated coefficient vector is used in order that the two filters can form Hilbert transform relation in the process of design.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.20-25
• /
• 2001

부유식 파랑에너지 변환시스템(Oscillating Water Column)에서 에너지 변환은 입력파와 챔버, 챔버내 공기의 상호작용으로 이루어진다. 이 논문은 파랑에너지를 기계적 운동으로 변환하는 기계적 특성을 해석한다. 단일 진동수 규칙파가 입력되었을 때에 파에 의하여 챔버의 상하운동이 선형적으로 발생하며, 이 상하운동은 챔버내의 압력 변화에 영향을 받는다. 상하운동과 챔버내로 투과한 파, 그리고 챔버내 압력에 의해 발생되는 파에 의해 챔버내의 상대운동을 정하고, 그 상대운동에 의한 공기의 압축 팽창과 온도상승을 근사적 열역학적 방정식으로 해석하여 오리피스를 통한 유량과 압력을 기준으로 에너지 변환요율을 결정하였다. 얻어진 식은 간단하면서도 관련요소의 영향을 전반적으로 표현한다. 개구율 변화에 따른 운동응답을 비교하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2005.11a
• /
• pp.181-184
• /
• 2005

다양한 처리능력을 가진 단말기들은 복잡한 네트워크 환경의 호환성을 제공하기 위해서, 전송 네트워크 채널이 허용하는 범위내로 부호화된 비디오의 비트율을 적응적으로 맞춰 주어야 한다. 트랜스코더는 특정 비트율로 부호화 되어 있는 비디오를 원하는 비트율로 다시 변환하기 위해서 복호화한 후 다시 부호화의 과정을 거쳐야 하기 때문에 이에 따른 계산량의 증가와 더불어 전송시간에 문제가 발생한다. 이를 해결하기 위한 한 가지 방법으로 제안된 것이 프레임 건너뜀 기법, 즉 시간적 해상도 변환 트랜스코딩이다. 비디오를 부호화하는 과정에서 계산량을 가장 많이 차지하는 움직임 추정과정의 계산량을 줄임으로써 트랜스코딩을 수행하는데 소모되는 시간과 노력을 크게 줄이고, 건너뛰지 않고 남아있는 프레임에 더 많은 비트를 할당하여 요구되는 화질을 유지할 수 있다. 본 논문에서 움직임 벡터의 방향성을 고려하여 제안한 기법인 E-FDVS (Efficient-Forward Dominant Vector Selection)는 움직임 벡터의 방향성을 고려하여 매크로블록과 움직임 벡터의 차이를 보상하여 움직임 벡터를 재추정한다. 실험에서는 MPEG-2 영상에 대해서 제안한 방법을 적용하여 기존의 방법들에 비해서 성능이 우수함을 보인다.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.245-256
• /
• 1995

Rugate filters of inhomogeneous refractive index were designed using the Fourier transform and the effect of reflectance, stop bandwidth, optical thickness, and Q function on the rugate filter was investigated. An iterative correction process using a merit function was employed to fit an initial design to the target spectrum. Three Q functions derived by Sossi, Bovard, and Fabricius, respectively, were compared in terms of the number of iteration, merit function, and optimum optical thickness. The result shows that after a number of iterations the Q functions by Bovard and Fabricius produce high rejection rugate filters closer to the target spectrum than the Sossi's Q function and the optimal optical thickness is determined by the stop-band width of the rugate filter. ilter.

• Geophysics and Geophysical Exploration
• /
• v.23 no.1
• /
• pp.50-54
• /
• 2020

Herein, the closed-form expressions of the magnetic field due to an axially symmetric body such as a right cylinder, are derived. The magnetic field due to a right cylinder is converted from the gravity gradient tensor using Poisson's relation; the magnetic field induced by a constant magnetization can be obtained from the gravity gradient tensor with a constant density. Because of the axial symmetry of the cylinder, the expressions of gravity gradient tensor are derived in cylindrical coordinate and then transformed into Cartesian coordinates for the three components of the magnetic field using an arbitrary magnetization direction.

• Geophysics and Geophysical Exploration
• /
• v.25 no.1
• /
• pp.38-43
• /
• 2022

In case axial symmetrical bodies with varying cross sections such as volcanic conduits and unexploded ordnance (UXO), it is efficient to approximate them by adding the response of thin disks perpendicular to the axis of symmetry. To compute the vector magnetic and magnetic gradient tensor respones by such bodies, it is necessary to derive an analytical expression of the circular disk. Therefore, in this study, we drive closed-form expressions of the vector magnetic and magnetic gradient tensor due to a circular disk. First, the vector magnetic field is obtained from the existing gravity gradient tensor using Poisson's relation where the gravity gradient tensor due to the same disk with a constant density can be transformed into a magnetic field. Then, the magnetic gradient tensor is derived by differentiating the vector magnetic field with respect to the cylindrical coordinates converted from the Cartesian coordinate system. Finally, both the vector magnetic and magnetic gradient tensors are derived using Lipschitz-Hankel type integrals based on the axial symmetry of the circular disk.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.327-334
• /
• 2016

In this paper, we propose a hardware architecture of transform and quantization for high-perfornamce HEVC(High Efficiency VIdeo Coding) encoder. HEVC transform decides the transform mode by comparing RDCost to search for the best mode of them. But, RDCost is computed using the bit-rate and distortion which is computed by transform, quantization, de-quantization, and inverse transform. Due to the many calculations and encoding time, it is hard to process high resolution and high definition image in real-time. This paper proposes the method of transform mode decision by comparing sum of coefficient after transform only. We use BD-PSNR and BD-Bitrate which is performance indicator. Based on the experimental result, We confirmed that the decision of transform mode can process images with no significant change in the image quality. We reduced hardware area by assigning different values at the same output according to the transform mode and overlapping coefficient multiplied as much as possible. Also, we raise performance by implementing sequential pipeline operation. In view of the larger process that we used compared with the process of reference paper, Our design has reduced by half the hardware area and has increased performance 2.3 times.