• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.679-686
• /
• 2002

Based on the alternating series expansion of error probability function due to phase noise in PSK systems, the performance evaluations for Tikhonov and Gaussian probability density functions were performed in this paper. The range of the signal-to-noise ratio of recovered carrier signal which provides the same dependency between the error performances by Tikhonov function and Gaussian function was analyzed via loss evaluation due to phase noise. The phase noise with 1/f$^2$ characteristic was generated based on the relationship of the phase noise spectral density and the modulation index for frequency modulation signal. Using the generated phase noise as the input signal for digital satellite communication receiver, the performance losses due to the phase noise were measured and evaluated with the analyzed performance characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.2
• /
• pp.122-136
• /
• 1986

In this paper, the new modulation system, the digital phase-frequency hybrid modulation system is proposed for mobile radio communications. The error rate and the outage equation of PFSK(Phase-Frequency Shift Keying) signal transmitted through the fading channel has been derived considiering deversity techniques. The error rate and the outgae rate performances of PFSK system have been evaluated and shown in figures in terms of carrier-to-noise power ratio(CNR), fading figure, numbers of diversity branches, correlation coefficient among the diversity branches. And the performance of PFSK system is superior to that of QDPSK system. And by using diversity techniques, system performances can be improved 13dB above in CNR.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.119-122
• /
• 2005

In this paper, we investigated the recognition range according to modulation index for the ISO(International Standards Organization) 14443 13.56MHz contactless Type B RFID(Radio Frequency IDentification) system. We measured recognition range with changing modulation index step by step from 5% to 24% where we used 4 samples of Type B transponder with different resonance frequencies between 13.838MHz and 17.200MHz. While gradually increasing a distance in vertical direction from the center of the reader antenna, we measured the distance where the transponder's PUPI(Pseudo Unique PICC(Proximity IC Card) Identifier) is recognized continuously during 10 seconds and the distance where the transponder's PUPI is recognized at least two times during 5 seconds. From the measurement results, we found that the best recognition ranges were achieved when the reader had modulation index between 11% and 14%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.374-382
• /
• 2018

This paper has done a hardware-based approach to increase the modulation index in 3-phase inverters, unlike the conventional software algorithm-based approaches. The minimum required time to measure the currents in a three-phase inverters with shunt resistors has also been analyzed. By the analysis, the longest time in minimum required time is AD conversion time. To shorten the minimum required time, this paper proposed a sample-and-hold(S/H) circuit implemented at the inverter current signal output to retain the current signal. When the linear operation region of an inverter with S/H was compared with that without it, the modulation index was increased by 7.8 %. Inverters with S/H circuits can employ the traditional software algorithms, such as the voltage injection method or current restoration method, and it will yield further increase the modulation index.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.6
• /
• pp.51-59
• /
• 1993

In this paper, we study the effects that the variations of machine parameters and frequency of which affect the instability occured in induction motors when operated at low speed or light load, by obtaining the locus of dominant root for the characteristic equation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.3
• /
• pp.120-126
• /
• 1984

In this paper, there is presented the novel encoder circuit design method in the realization of exponential adaption process on the delta modulation coding of speech signals. The digital implementation has been adapted for the illustration of above, especially using a rate multiplier end a double integration circuit. The use of a double integration of the local decoder included in the ADM encoder in prove the undesirable characteristics which the low switching speed of the ratemultiplier couses the SQNR to decreuse, and the SQNR of the decoding signal by above realization is relatively uniformed in wide range of signal levels. The validity of the above design is verified by laboratory experiments.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.569-574
• /
• 2003

본 연구에서는 종전의 2상 SRP-PWM(Separately Randomized llulse Position PWM)기법의 문제점을 해결하고자 멀티 영벡터 선택에 의한 2상 SRP-PWM(Multi-Zero vectors Selection SRP : MZSRP) 기법을 제안하였다. 제안된 2상 MZSRP는 변조지수 M이 0.7보다 크게 되면 영벡터를 V(111)으로 선택하고, 작은 경우에는 V(000)을 선택하는 기법이며, M의 전 영역에 걸쳐서 광대역화된 스펙트럼을 얻을 수가 있다. M의 변화에 따른 모터 전압 및 전류의 스펙트럼을 Matlab/Simulink에 의하여 시뮬레이션을 수행하였으며, 본 연구의 타당성을 입증할 수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2004.11a
• /
• pp.169-174
• /
• 2004

이 논문에 서 는 DVB-S2 BC(Backward Compatibility) 모드에서 복조방식 에 따른 수신성 능을 분석하였다. 송신기는 DVB-S(HP)와 DVB-S2(LP) 스트림을 계층적 비대칭 8-PSK로 변조시킨 신호를 전송하며, 수신기는 계층적 변조 신호를 복조하기 위하여 LSB 에서 MSB순으로 복조하는 방식과 사분면 추정지수와 LLR 계산기를 이용한 계층적 복조방식을 적용할 수 있다. 이 논문은 두 복조방식에 대한 성능분석을 AWGN 및 비선형 채널에서 통계적 분석과 모의실험을 통하여 수행하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.203-209
• /
• 2006

In this paper, proposed diversity algorithm that decrease fading. In the wireless channel, if fading occurs due to the multipaths the performance of the system is apparently reduced. This study applied tap-delay receiver. It applied QPSK and OQPSK modulation methods and applied the convolutional codes, where the code rate is 1/2 and 1/3 and the constraint length is 11 and the turbo code where the constraint length is 6. The diversity algorithm proposed in this paper could be compared and analyzed the average error probability of modulation method variable of fading factor to uplink and downlink channels.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.135-140
• /
• 2021

This study introduces a new pulse width modulation (PWM) method to reduce common-mode voltages (CMVs) and then compares its performance with other reduced CMV-PWM (RCMV-PWM) methods. CMVs should be reduced to ensure the electromagnetic compatibility and safety of grid-connected inverters. RCMV-PWM methods attempt to synthesize voltage references without zero vectors, which cause high CMV peaks. In these methods, the peak-to-peak magnitude of CMVs can be reduced by one-third of the conventional space-vector PWM. The introduced method splits every reference vector into two vectors to avoid the use of zero vectors. The performances of the RCMV-PWM methods are analyzed in accordance with the modulation index through simulation and experiment.