• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.693-699
• /
• 2016

In this study, the replacement effects of cementitious materials (fly ash, blast furnace slag, and blended mixtures) were assessed for normal strength concrete with very low shrinkage properties under $350{\mu}{\varepsilon}$ strain using a powder type shrinkage reducing agent. In addition, through mock-up tests of actual size walls restrained with four sides, the shrinkage characteristics using the power type shrinkage reducing agent were measured and the crack reducing ability was assessed. The slump and air contents were measured as the properties of fresh concrete, and the length changes of the prismatic specimens, $100{\times}100{\times}400mm$ in size, were measured for the shrinkage characteristics. To reduce the shrinkage of concrete, the maximum replacing ratio of the fly ash is effective to 20 percent; however, the use of blast furnace slag and ternary mixtures did not reduce the shrinkage.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.137-141
• /
• 1969

In order to obtain amino acids and nucleic acid derivatives from adenine auxotrophic mutants of Bacillus subtilis and Escherichia coli, vitamin, nucleic acid analogue, streptomycin as well as ultraviolet light were adopted for the production of adenine auxotrophic mutants and the results showed efficient production of desired mutants. 1. Ultraviolet ray $(2530\;{\AA}\;2080\;erg/mm^2)$ irradiation to Bacillus subtilis and E. coli at a distance of 30 cm for 80-90 sec. and for 15-20 sec. respetively induced four and eight strains of auxotrophic mutants. 2. Treatment of aminopterine$(200\;{\mu}g/ml)$ inhibited the growth of Bacillus sultilis significantly but a subsequent irradiation of ultraviolet light at the above mentioned conditions induced six times as much mutants as compared to the irradiation alone. In case of E. coli a similar tendency was observed with treatment of streptomycin$(200\;{\mu}g/ml)$ with doubled induction rate of adenine auxotrophic mutants as compared to the irradiation alone.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.2
• /
• pp.139-144
• /
• 1996

This research was carried out to clarify effects of cultural condition on the content of Alisol B-monoacetate, whose function is antihypercolesterol in blood, and yield in Alisma Rhizomes. When the corm part of Alisma Rhizomes was extracted by shaking extraction at $25^{\circ}C$ and reflux extraction at $40^{\circ}C$ to $100^{\circ}C$ four times, the total content of Alisol B-monoacetate was 0. 402%, 0. 425% and 0. 402% at $25^{\circ}C$, $40^{\circ}C$ and $60^{\circ}C$ respectively. The recovery rate was 97% by three times extraction at $25^{\circ}C$, and 96% and 97% by three times extraction at $40^{\circ}C$ and $60^{\circ}C$ respectively. When the corm was harvested on Oct. 30, the content of Alisol B-monoacetate was 0. 46% but it was increased to 0. 71% on Nov. 30. In the case of Oct. 30, the corms of $S(4{\sim}14g\; FW)$ size were determined to contain the highest level of Alisol B-monoacetate (0. 53%), and the content was decreased as the corn size was increased. This tendency was also adopted on Nov. 30. On the other hand, the content of crude protein and starch was changed rarely by the period of harvest. When the planting depth was $0{\sim}1cm$, the yield was the highest as 206kg/10a, and the yield was decreased as the planting depth was deep. The variation of the content of Alisol B-monoacetate was small as 0. 33% to 0. 39% by planting depth. From the above results it could be concluded that the optimum time for harvest of Alisma Rhizomes is Nov. 30 and the optimum planting depth is $0{\sim}1cm$.

• KSBB Journal
• /
• v.15 no.2
• /
• pp.125-133
• /
• 2000

Specific carotenoids and astaxanthin biosynthesis power of Phaffia rhodozyma mutant 876, which was obtained after NTG a and UV treatments, was higher than those of the wild type by 40% and 50%, respectively. The mutant strain did not show t the catabolite repression even at 22% (w/v) glucose concentration. The optimum C{N ratio was 2.0, and the optimum t temperature and initial pH were $22^{\circ}C$ and 6.0, respectively. 80th cell growth and astaxanthin formation decreased drastically a as the fermentation temperature was increased over $22^{\circ}C$, whereas they were comparable in the pH range between 5.0 and 7 7.0. Inoculum size did not affect the final cell density nor the carotenoids biosynthesis, and 3%(v/v) was selected as optimal. H Higher dissolved oxygen concentration facilitated astaxanthin biosynthesis, and aeration rate of 1.0 v/0/m and agitation speed of 400 rpm were selected as optimum. The final cell dens때 of 43.3 g/L and the volumetric astaxanthin and carotenoids concentrations of 110.6 mg/L and 149.4 mg/L, respectively, were obtained. The specific carotenoids concentration was 3.45 m mg{g-yeast(dry). Yx/s and Yp/s values of 0.37 and 1.08 were obtained. The result of this study will provide basic information u useful for mass production of astaxanthin from P. rhodozyma fermentation.

• Korean Journal of Breeding Science
• /
• v.43 no.1
• /
• pp.68-80
• /
• 2011

This study was conducted to investigate characteristics and variations of rice panicle traits for breeding temperate japonica varieties adapted to tropical environment. Eleven panicle traits were investigated from nine Korean rice varieties cultivated in Korea and wet season of the Philippines. Tested cultivars were composed of six temperate japonica varieties, three Tongil-type varieties, and one indica variety bred in the Philippines. The number of spikelets on secondary rachis branches (SRBs) was the most variable trait in both environments, while the mean number of spikelets on a primary rachis branch (PRB) was the least variable. Compared with PRB-related traits, SRB traits showed higher correlation with the number of spikelets per panicle. Compared with the plants grown in Korea, the number of spikelets on SRBs, the number of SRBs, spikelets, and rachis branches per panicle were decreased more than other traits in the Philippines. According to path analysis, the number of spikelets on SRBs per panicle affects the number of spikelets per panicle more than the number of spikelets on PRBs per panicle. Climatic factors such as growth duration, cumulative mean temperature, and integrated solar radiation were highly correlated with the relative rate of number of spikelets per panicle. To breed temperate japonica rice varieties adapted to tropical environment, it would be important to select lines which maintain proper growth duration and spikelets on SRBs in target region.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.3
• /
• pp.225-240
• /
• 2006

In order to calculate bending moments of rectangular plates with three edges clamped the other free subjected to both a uniform load and a triangular load, a finite difference equation for the non-dimensional governing equation are presented and numerical solutions with different aspect ratios and/or number of grid points are analyzed. The finite difference solutions are obtained by use of grid points up to 11,520 and the optimum grid points according to aspect ratios of the plate are presented as well. The obtained numerical solutions are shown to satisfy the given x moment boundary condition at the free edge, which can not be satisfied in Levy's analytical solutions and peculiar behaviour of the calculated moments is observed around the corners between the free edge and fixed ones. The numerical solutions of bending moments subjected to both a uniform load and a triangular load are compared with the corresponding analytical solutions which are shown in very good agreement on the solution domain except the neighborhood of the free edge.

• Journal of the Korean earth science society
• /
• v.26 no.5
• /
• pp.429-435
• /
• 2005

3D RMR (Rock Mass Rating) analysis has been performed by applying the Geostatistical integration technique for geophysical and borehole data. Of the various geostatistical techniques for the integrated data analysis, in this study, we applied the SKlvm (Simple Kriging with local varying means) method that substitutes the values of the interpreted geophysical result with the mean values of the RMR at the location to be inferred. The substitution is performed by the indicator transform between the result of geophysical interpretation and the observed RMR values at borehole sites. The used geophysical data are the electrical resistivity and MT result, and 10 borehole sites are investigated to obtain the RMR values. This integrated analysis makes the interpretation to be more practical for identifying the realistic RMR distribution that supports the regional geological situation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.343-349
• /
• 1988

In order to get informations for breeding early barley cultivars, the thermosensitivity and low temperature growth ability about the breeding materials vernalized were tested at the high '||'&'||'amp; low temperature and field conditions. The temperature coefficient (Q10), ratio and thermosensitivity for plant height were various among cultivars versus temperature treatments. The early cultivars had greater Q10 values and insensitive responses to temperature changes. The Q10 and thermosensitivity for the time of flag leaf unfolding were various among cultivars, but the coefficient of variation in the thermosensitivity was greater, so the character would be more useful for investigating the varietal differences. The Q10 and thermosensitivity for plant height were not significantly correlated with Q10 and thermosensitivity for the time of flag leaf unfolding. The periods from heading to flowering were 2 to 4 days at the high temperature plot, but 1 to 11 days at the low temperature plot, showing much greater variations. In general the cultivars with greater difference of heading time between the high and low temperature plots were Suwon 218, SB 76588, Oweolbori, and Jogangbori, showing the sensitive thermophase and early heading.

• Applied Biological Chemistry
• /
• v.29 no.1
• /
• pp.78-82
• /
• 1986

Panax ginseng seedlings were grown in vermiculite with nutrient solution different in nitrogen, phosphorus ana potassium level. Ginsenoside contents of root were investigated by high performance liquid chromatogram. Elimination or increase of one of N.P.K. increased or decreased total saponin content. Nitrogen was most effective (15.5% for-N to 8.9% for 3N) and potassium least. Similar trend was shown in each ginsenoside. According to coefficient of variation in one nutrient treatment or among all nutrient treatments ginsenoside Re was most insensitive to nutrient change and also other environmental factors and Rd most sensitive. Diol content (PD) was more variable than triol (PT) and variation of PT/PD was about half of them. Variation of ginsenoside content by nutrient change had no relation with the ginsenoside content. Similarity of ginsenoside pattern slightly decreased with the difference of saponin content by nutrient change. Root weight was significantly small only in tap water plot.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.8
• /
• pp.401-410
• /
• 2017

This paper proposes a method to generate test cases in an automatic manner, based on checklist containing test cases used for testing embedded systems. In general, the items to be tested are defined in a checklist. However, most test case generation strategies recommend to test a system with not only the defined test items but also various mutated test conditions. The proposed method parses checklist in Korean file and figures out the system inputs and outputs, and operation information. With the found information and the user defined test case generation strategy, the test cases are automatically generated. With the proposed method, the errors introduced during manual test case generation may be reduced and various test cases not defined in checklist can be generated. The proposed method is implemented and the experiment is performed with the checklist for an medical embedded system. The feasibility of the proposed method is shown through the test cases generated from the checklist. The test cases are adequate to the coverages and their statistics are correct.