• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.61-68
• /
• 1991

The system such as railway bridge can be modelled as the restrained beam with intermediate supports. This kind of structures are subject to the moving load, which has a great effect on dynamic stresses and can cause sever motions, especially at high velocities. Therefore, to analyze the dynamic characteristics of the system due to the moving load is very important. In this paper, the governing equation of motion of a restrained beam subjected to the moving load is derived by using the Hamilton's principle. The orthogonal polynomial functions, which are trial functions and satisfying the geometric and dynamic boundary conditions, are obtained through simple procedure. The dynamic response of the system subjected to the moving loads is obtained by using the Galerkin's method and the numerical time integration technique. The numerical tests for various constraint, velocity and boundary conditions were preformed. Furthermore, the effects of mass of the moving load are studied in detail.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.228-229
• /
• 2007

현재까지 계통연계형 태양광 시스템의 최대전력추종(MPPT)방법에 대한 많은 연구가 진행되고 있다. 그 중 대표적인 최대 전력 추종 방법에는 일정전압 제어방식, P&O(Perturbation and Observation)제어방식, IncCond(Incremental Condutance) 제어 방식이 있다. 이 중 일정전압 제어방식은 일사량, 온도 등을 고려해 특정한 값의 태양전지 출력전압을 고정시키도록 하여, 최대전력점 근처에서 동작하도록 제어하는 방식이다. 이 방식은 태양전지 입력 전류 센서가 필요없고, 저일사량 조건에서 다른 기법에 비해 우수한 효율 특성을 나타내고 있다. 하지만, 온도 및 일사 조건에 따라 변하는 최대전력전압지점을 추종하지 못해 다양한 조건에서 최대전력추종효율이 떨어지는 단점이 있다. 이에 본 논문에서는 다양한 일사 조건 및 온도 조건에 대응하는 최대 출력전압을 실시간으로 산출하여, 이를 통해 최대전력추종제어를 하는 방법을 제안하고자 한다. 제안된 기법은 다양한 일사조건 및 온도변화에 대해 능동적으로 대응하여 우수한 추종효율 특성을 나타내고, 또한 입력 DC 전류 센서를 제거하고, 내부 연산이 간단함으로써 경제적인 면에서 유리하다. 본 논문에서 제안된 최대전력 추종기법의 타당성을 검증하기 위해서 PSIM 시뮬레이션을 통해 그 타당성을 검증 하였다.

• Journal of Broadcast Engineering
• /
• v.17 no.5
• /
• pp.838-850
• /
• 2012

In this paper, we propose a novel algorithm that generates multi-view images by using various image features obtained from the given stereoscopic images. In the proposed algorithm, we first create an intensity gradient saliency map from the given stereo images. And then we calculate a block-based optical flow that represents the relative movement(disparity) of each block with certain size between left and right images. And we also obtain the disparities of feature points that are extracted by SIFT(scale-invariant We then create a disparity saliency map by combining these extracted disparity features. Disparity saliency map is refined through the occlusion detection and removal of false disparities. Thirdly, we extract straight line segments in order to minimize the distortion of straight lines during the image warping. Finally, we generate multi-view images by grid mesh-based image warping algorithm. Extracted image features are used as constraints during grid mesh-based image warping. The experimental results show that the proposed algorithm performs better than the conventional DIBR algorithm in terms of visual quality.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.115-123
• /
• 2015

The incremental learning method performs well in face face tracking. However, it has a drawback in that it is sensitive to the tracking error in the previous frame due to the environmental changes. In this paper, we propose a selective incremental learning method to track a face more reliably under various conditions. The proposed method is robust to illumination variation by using the LBP(Local Binary Pattern) features for each individual frame. We select patches to be used in incremental learning by using Staggered Multi-Scale LBP, which prevents the propagation of tracking errors occurred in the previous frame. The experimental results show that the proposed method improves the face tracking performance on the videos with environmental changes such as illumination variation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.2
• /
• pp.173-181
• /
• 2014

The propagation behavior and structural variation of a premixed propane/air flame with frequency change in an ultrasonic standing wave at various equivalence ratios were experimentally investigated using Schlieren photography and pressure measurement. The propagating flame was observed in high-speed Schlieren images, allowing local flame velocities of the moving front to be analyzed in detail. The study reveals that the distorted flame front and horizontal splitting in the burnt zone are due to the ultrasonic standing wave. Vertical locations of the distortion and horizontal stripes are intimately dependent on the frequency of the ultrasonic standing wave. In addition, the propagation velocity of the flame front bounded by the standing wave is greater than that of the flame front without acoustic excitation. As expected, the influence of the ultrasonic standing wave on premixed-flame propagation becomes more prominent as the frequency increases.

• Korean Journal of Microbiology
• /
• v.39 no.3
• /
• pp.155-160
• /
• 2003

The wild type and two morphological variants of Streptomyces viridochromogenes were studied for their lipidand fatty acid compositions at different incubation temperatures. It showed that a decrease in triacylglycerol content was closely linked to the aerial mycelium formation. Phospholipids showed no characteristic changes, except that the contents of phosphatidylethanolamine were clearly high for aerial mycelium deficient strain BR2 grown at $20^{\circ}C$. The strain BR2 also presented unidentified aminolipids with various $R_{f}$ values. Among the aminolipids, ornithinolipid increased gradually during the cultivation for all strains. The changes in fatty acid compositions showed a temperature dependency that the proportion of unsaturated acids decreased as the growth temperature increased. The proportion of straight chain saturated fatty acids decreased as the aerial mycelium developed, and it was most evident for the mutant strain M13 with more extensive aerial mycelium. The mutant strain BR2 presented significantly higher level of iso branched odd numbered saturated fatty acids.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.4
• /
• pp.293-297
• /
• 1981

An attempt has been made to determine the optimum size of sampling unit and the number of samples for a given precision in wheat, using the data collected from the various experiments in 1979/80. It was found that the coefficients of variation for number of spikes except the case of high-ridge broadcasting by 8HP rotarized seeder are in the same order of those for yield of wheat, and the regression coefficients associated with the coefficients of variation and the size of sampling unit were significant at 1% level of type I error. A wide range of variation in the size of sampling unit was observed for different methods of seeding, indicating the proper sizes of sampling units for 40cm \times 18cm, 60cm \times 18cm, 20cm \times 5cm, 120cm \times 90cm to be 0.40$m^2$, 0.17$m^2$, , 0.11$m^2$, , 0.55$m^2$, , respectively. The variance component for the experimental error was not physically possible to estimate due probably to high variability among the sampling units. The number of the sampling units per plot for a given precision of CV=12% was estimated to be one in an experiment with 4 replicates.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.230-232
• /
• 2008

본 논문은 정상상태에서의 태양광 PV 모듈의 출력특성을 가지며 일사량과 온도의 변화에 따라 가 변하는 I-V 곡선의 특성을 나타내는 태양광 어레이 시뮬레이터의 제작에 관한 연구 결과이다. 본 시뮬레이터는 태양전지의 I-V 곡선상의 동작점을 실시간으로 표시하여, 가변하는 일사량과 온도를 설정하는 유저 인터페이스를 Labview 프로그램으로 구현하였으며 직류 프로그래머블 전원장치(DC programmable power supply)를 GPIB로 연결하여 구현하였다. 정상 부하조건 뿐만 아니라 개방조건, 단락조건에서도 동작하는 태양전지 동작점 추적 알고리즘을 개발하였으며 실험을 통하여 제안한 알고리즘의 효용성을 확인하였다.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1978.04a
• /
• pp.98.4-98
• /
• 1978

방선균에서 RNA 분해효소력이 강한 균주를 토양으로부터 선별하여 이 균주의 RNA 분해산물을 검토하고 부산물로서 항생물질의 생성을 조사하였다. 먼저 동시 생성 생육조건을 검토한 결과, 유기 질소원으로서 soybean meal 1.5%, 무기 질소원으로서는 $KNO_3$ 0.05% 첨가하였을 때 효과가 있었고, 탄소원으로서는 가용성 전분 2% 첨가시가 조건이 좋았다. 무기염류를 배지에 첨가하였을 때 별 다른 영향이 없었고 오히려 $CuSO_4를$ 가하였을 때는 저해를 보였다. 최초 pH가 7.0, 배양 2일째에 균체증식, 효소생산 및 항생물질의 생산이 최대를 나타내었다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.999-1000
• /
• 2011

영구자석을 삽입하는 IPM(Interior Permanent Magnet : 이하 IPM) 방식의 동기전동기 설계에서 브리지의 형상 결정은 기계적인 안정성을 확보하고 출력 요구사양을 만족시키기 위해 구조해석과 자기회로 해석을 병행하여 검토하는 것을 요구한다. 본 논문에서는 IPM타입 동기전동기를 대상으로 회전자 원심력이 정적상태로 인가되는 정하중 조건과 속도변화가 시간에 따라 변하는 동하중 조건일 경우를 구분하여 설계 여유를 분석하였으며, 영구자석의 접착여부에 따라 브리지에 발생하는 응력 분포의 차이를 해석하였다. 또한, 동하중 상태에서 재료의 응력-피로 특성을 통해 피로 한계 조건을 설계단계에서 예측하였다.