• The Korean Journal of Applied Statistics
• /
• v.31 no.5
• /
• pp.587-597
• /
• 2018

Procedures, such as sampling technique, survey method, and questionnaire preparation, are required in order to obtain sample data in accordance with the purpose of a survey. An important procedure is the decision of the sample size formula. The sample size formula is determined by setting the target error and total cost according to the sampling method. In this paper, we propose a sample size formula using population changes over time, estimation error of the previous time and response rate of past data when the target error and the expected response rate are given in the simple random sampling. In actual research, we use estimators that apply complex weights in addition to design-based weights. Therefore, we induce a sample size formula for estimators using design-based weights and nonresponse adjustment coefficients, that can be a formula that reflects differences in response rates when survey methods are changed over time. In addition, we use simulations to compare the proposed formula with the existing sample size formula.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.53-60
• /
• 2017

Most of present ultrasonic distance measurement technologies are based on the measurement of the TOF (: Time of Flight), the elapsed time during which the ultrasonic wave travels from its transmitter to receiver, to evaluate the distance the wave travels during that time. In this case, high distance measurement accuracy requires an accurate measurement of TOF. In order to acquire an accurate TOF, this paper proposes a method that produces the TOF by using a mathematical model of the received signal obtained from a mathematical model of ultrasonic transducer. The proposed method estimates the arrival time of the received signal retrospectively by comparing its wave form obtained after triggering point with its mathematical model in the sense of least-square. Experimental result shows that the effect of variation of triggering point can be decreased by implementing the proposed method.

• Journal of Broadcast Engineering
• /
• v.23 no.2
• /
• pp.316-319
• /
• 2018

When a terrestrial UHD broadcasting service and a mobile HD broadcasting service are provided using the PLP function provided by ATSC 3.0 and domestic UHD broadcasting standard, a small amount of data may be additionally transmitted to further provide high quality UHD-3D broadcasting service. The left and right images of the stereoscopic image are input, one view image is encoded by the SHVC method, and the other view images are encoded by the SHVC method of the two-view cross-referencing method. However, since the base layers (BL) of the two encoders are mutually common, the two encoders correspond to encoders that generate one BL stream and two enhancement layer (EL) streams. The average encoding efficiency is 16% more efficient compared to the third independent HEVC encoding for the UHD-3D broadcast service. The proposed scheme reduces the fluctuation of PSNR per image frame and increases the image quality of minimum PSNR frame by 0.6dB.

• Korean Journal of Remote Sensing
• /
• v.25 no.5
• /
• pp.423-434
• /
• 2009

The Arctic environment is sensitive to change of sea-ice distribution. The increase and decrease of sea ice work to an index of globe warming progress. In order to predict the progress of hereafter earth global warming, continuous monitoring regarding a change of the sea ice area in the Arctic should be performed. The remote sensing based on an artificial satellite is most effective on the North Pole. The sea ice observation using a passive microwave sensor has been continued from 1970's. The determination of sea ice extent and ice type is one of the great successes of the passive microwave imagers. In this paper, to investigate the seasonal and inter-annual variation of sea-ice distribution we used here the sea ice data from July 2002 to May 2009 around the Arctic within $60^{\circ}N$ for the AMSR-E 12.5km sea-ice concentration, a passive microwave sensor. From an early analysis of these data, the arctic sea-ice extent has been steadily decreasing at a rate of about 3.1%, accounting for about $2{\times}10^5\;km^2$, which was calculated for the sea-ice cover reaching its minimum extent at the end of each summer. It is also revealed that this trend corresponds to a decline in the multi-year ice that is affected mainly by summer sea surface and air temperature increases. The extent of younger and thinner (first-year) ice decreased to the 2007 minimum, but rapidly recovered in 2008 and 2009 due to the dramatic loss in 2007. Seasonal variations of the sea-ice extent show significant year-to-year variation in the seasons of January-March in the Barents and Labrador seas and August-October in the region from the East Siberian and Chukchi seas to the North Pole. The spatial distribution of multi-year ice (7-year old) indicates that the perennial ice fraction has rapidly shrunk recently out of the East Siberian, Laptev, and Kara seas to the high region of the Arctic within the last seven years and the Northeast Passage could become open year-round in near future.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.33-42
• /
• 2007

This research proposes strategies about providing detour route information and traffic management for flood disasters. Suggested strategies are based on prevention and preparation concepts including prediction, optimization, and simulation in order to minimize damage. Specifically, this study shows the possibility that average travel speed is increased by proper signal progression during downpours or heavy snowfalls. In addition, in order to protect the drivers and vehicles from dangerous situations, this study proposes a route guidance strategy based on variational inequalities such as flooding. However, other roads can have traffic congestion by the suggested strategies. Thus, this study also shows the possibility to solve traffic congestion of other roads in networks with emergency signal modes.

• The Journal of the Korea Contents Association
• /
• v.9 no.7
• /
• pp.276-284
• /
• 2009

This paper applies DEA windows analysis in order to determine the efficiency of the Districts of Busan Metropolitan City over time for 5 years (2003 - 2007). This paper used such factors including Number of solutions of civil petitions, Local Tax Collection, and Financial Independent rate as output, Total Labor Costs, Government Employees, Population and Expenditure as inputs. This study concludes that the efficiency of the different District can fluctuate over time to different extents and efficiency of most District decreases from 2003. Indeed, the empirical results reveal that substantial inefficiency exists in some Districts at some point in time. In consequence, this validates the necessity for using DEA windows analysis in preference to an analysis based upon cross-sectional data. This paper shows that Districts' efficiency decreases as Window goes to 1 to 3.

• The Journal of Society for e-Business Studies
• /
• v.13 no.4
• /
• pp.49-69
• /
• 2008

Recently, ubiquitous computing technology becomes available to develop advanced electronic commerce：u-commerce. Hence, it is the very time to perform feasibility analysis in applying ubiquitous computing technology, especially estimating economical value of the on-going technology. Hence, the purpose of this paper is to propose a financial value estimating methodology in performing feasibility test on ubiquitous computing technology. To do so, Black and Scholes model is basically adopted. To show the feasibility if the idea proposed in this paper, actual case study through focused group interview with those who are actually performing on-going ubiquitous computing projects. As the result, we validated the possibility of applying Black-Sholes model to assessing feasibility analysis for ubiquitous technology development with the price of call option, volatility, and the comparison with other similar technologies.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.40-47
• /
• 2016

In this paper, a dual mode buck converter with an ability to change mode is proposed, which is suitable particularly for portable device. The problem of conventional mode control circuit is affected by load variation condition such as suddenly or slowly. To resolve this problem, the mode control was designed with slow clock method. Also, when change from the PFM(Pulse Frequency Modulation) mode to the PWM(Pulse Width Modulation) mode, to use the counter to detect a high load. And the user can select mode transition point in load range from 20mA to 90mA by 3 bit digital signal. The circuits are implemented by using BCDMOS 0.18um 2-polt 3-metal process. Measurement environment are input voltage 3.7V, output voltage 1.2V and load current range from 10uA to 500mA. And measurement result show that the peak efficiency is 86% and ripple voltage is less 32mV.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.274-277
• /
• 2006

The EAC(Estimate at Completion) among existing methods, which estimate cost and time effectively, help managers anticipate changeable several results at the point of $15{\sim}30%$ in the project progress. However, this method may cause such some problems as not to consider the periodically changing circumstances caused by construction risks or uncertainties which can affect the cost and time in the project, and to regard collected and accumulated data only as a single value when predicting the results on the progress. Accordingly, it is very difficult to accept the even small range of variability based on the anticipation of EAC. Consequently, the study focuses on the possibility methodology to anticipate time and cost accurately on the way to utilize EVMS(Earned Value Management System), and also suggest the way to perform the right estimation of EAC as considering various risks and uncertainties in construction projects.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.21-21
• /
• 2009

현장의 GMA 용접기는 일반적으로 용접기 본체로부터 와이어 송급장치까지의 거리가 약 50m 정도 떨어져 있고 송급장치로부터 토치까지의 거리는 약 3~5m 정도이다. 특히 국산 GMA 용접기의 와이어 송급장치는 DC 모터의 일종인 프린트모터를 사용하고 있으며 제어기는 오픈루프 제어를 하고 있다. 따라서 와이어 송급속도의 변동을 보상할 수 있는 어떤 수단도 장착되어 있지 않다. 또한 송급장치와 토치간 와이어를 안내하는 케이블 도관의 마찰 때문에 토치 끝단에서의 와이어 송급속도가 불규칙해질 수밖에 없다. 용접 시 와이어 송급속도의 순간적인 변동 때문에 용접부의 전류 파형이 매우 불규칙해지고 이 때문에 용융된 용적이 용융풀로 이행하지 못하고 스패터로 비산하는 현상을 발생시킨다. 본 연구에서는 이를 해결하고자 국산 SCR 용접기 및 인버터 용접기와 호환 가능한 디지털 제어형 와이어 송급장치와 Push-Pull 용접 토치를 개발하였다. 또한, 개발된 시스템을 이용하여 정 역 방향 제어기술을 적용하였고 아크 발생 시의 스패터 최소화 공정을 제안하였다. 실험은 SM490A 강재를 사용하여 BOP(Bead On Plate) 용접을 실행하였다. 용접 중 LabVIEW를 이용하여 아크 발생 초기 전류, 전압 그리고 와이어 송급속도를 측정하였고, 고속 카메라를 이용하여 용접현상을 분석하였다. 본 연구를 통해 아크 발생 초기의 스패터를 최소화하는 공정을 도출할 수 있었다. 용접공정 변수인 아크 발생 초기의 와이어 송급속도, 와이어의 역송급 진행거리 그리고 역송급 판단 시점의 용접 전류 값은 실험을 통해 얻을 수 있었다. 또한, 이 연구를 통해 개발된 시스템의 성능을 평가하였다.