• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.337-349
• /
• 2006

Seven hundred and fifty one fractures of the rhyolitic tuffaceous rock masses were mapped using 6 scanlines placed on rock slope exposures that were within 8.02 km of Busan-Ulsan highway. These data were analyzed to find the number of fracture sets that exist in the rock slopes and the probability distributions of orientation, spacing, trace length and fracture size in 3-D for each of the fracture sets. All the fracture set orientation distributions exhibit high variability. The Fisher distributions were found to be unsuitable to represent the statistical distribution of orientation for most of the fracture sets. The probability distributions, gamma, exponential and lognormal were found to be highly suitable to represent the distribution of spacing and semi-trace length of fracture sets. In obtain-ing these distributions, corrections were applied for sampling biases associated with spacing and trace length. The generated fracture system in 3-D was used to make predictions of fracture traces for each fracture set on 2-D win-dows. Developed stochastic 3-D fracture network for the rock mass was validated by comparing statistical proper-ties of the observed fracture traces on scanlines with the predicted fracture traces on the scanlines. This exercise fumed out to be successful.

• Journal of Korea Water Resources Association
• /
• v.56 no.spc1
• /
• pp.1049-1058
• /
• 2023

The flow passing through river-crossing structures such as weirs and low-fall dams is dominated by rapidly varied flow including hydraulic jump. The intense unsteadiness of flow velocity and free surface profile affects the stability of such hydraulic structures. In particular, the steady hydraulic jump generated at high Froude number conditions includes remarkably air entrainment, making the flow characteristics more complicated. In this study, a large-eddy simulation was performed for turbulence effect and the hybrid VoF technique to simulate the steady hydraulic jump at the Froude number of 7.3 and the Reynolds number of 15,700. The results of the numerical simulation showed that the instantaneous maximum pressure and time-average pressure distribution calculated on the bottom surface downstream of the structure could be reasonably well reproduced being in good agreement with the experimental values. However, the instantaneous minimum pressure distribution in the direct downstream of the structure shows the opposite pattern to the target experimental measurement value. However, the numerical simulation performed in this study is considered to reasonably predict the minimum pressure distributions observed in various experiments conducted at similar conditions. The vertical distributions of flow velocity and air concentration computed in the center of the hydraulic jump were found to be in good agreement with the experimental results measured under similar conditions, showing self-similarity. These results show that the large eddy simulation and hybrid VoF techniques applied in this study can reproduce the hydraulic jump with strong air entrainment and the resulting intense free surface and pressure fluctuations at high Froude number conditions.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.636-638
• /
• 1999

본 논문에서는 선형 대규모 시스템(large-scale systems)에 대하여 강건한 분산 제어기를 설계한다. 동일한 부시템(identical subsystems)들이 서로 대칭적으로 연결되어 있는 제어기 설계 시 불확실성은 부시스템 행렬과 연결 시스템 행렬의 유계된 매개 변수 변동을 모두 고려한다. 본 논문의 설계 절차는 대칭 연결 구조를 불확실성으로 포함시킨 하나의 인공적인 보조 시스템(artificial auxiliary systems)으로 번환 함으로써 대규모 시스템에 대한 분산 제어기 설계의 복잡성을 줄일 수 있음을 보이고 수치 예를 통해 이를 확인한다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.38
• /
• pp.147-157
• /
• 1996

전통적인 원가계산 시스템에서 원가의 정확성은 생산량의 증감에 다라 변동하는 제조간접비에 의존하게 되며, 원가 배부기준은 대부분 생산하고 있는 제품의 수량과 밀접하다. 그러나, FMS 혹은 CIM등의 고도로 발달한 제조환경에서의 제조간접비는 반드시 생산량에 비례하지 않는다. 즉, 제품원가 구조변화 및 생산의 복잡성과 다양성에 따른 기업환경 변화 등이 주원인이 될 수 있다. 따라서 본 연구에서는 ABC 원가계산 시스템과 LP Model에 의한 전통적인 원가계산 방식과는 다른 ABC 원가계산 시스템을 만들었으며, 원가 활동동인에 따라 생산성 및 생산성 향상, 최적투자 활동 등을 수행할 수 있는 FMS 생산시스템의 최적평가 Model을 구축하였다.

• The Korean Journal of Financial Management
• /
• v.24 no.1
• /
• pp.109-147
• /
• 2007

According to the perspective of capital structure theory, we analyzed the dynamism of the capital structure determinants by using panel data of 244 KOSDAQ firms based on two-step GMM system methodology suggested by Blundell Bond(1998). This dynamic methodology had not been used to analyse capital structure determinants in Korea. In the dynamic model of capital structure, profit had negative effect on the book leverage and market leverage, which meant supporting pecking order theory. Growth opportunity (MBR) affected negatively to the market leverage. For the determinants of leverage, earnings volatility had significantly positive effect on KOSDAQ 50 firms. KOSDAQ and KOSDAQ 50 firms had the target leverage. The adjustment speed in KOSDAQ firms was 0.4958 on the book leverage, it was faster than in KOSDAQ 50 firm's 0.2863 on the book leverage and the adjustment speeds for the market leverage were 0.7651 for KOSDAQ firms and 0.5643 for KOSDAQ 50 firms. There was difference in adjustment cost between KOSDAQ firms and KOSDAQ 50 firms.

• Korea journal of population studies
• /
• v.21 no.1
• /
• pp.5-41
• /
• 1998

Over the past 30 years, Korea experienced demographic transition which typically substitutes quality(education) for quantity(number) of population. This paper decomposed labor supply into quantity and quality aspects and estimated the respective employment elasticities of economic growth in the past. Then, based on the assumptions about the future population (by age, sex and education) and labor force participation rates, the future labor supply(both quantity and quality) is projected and growth potential of the Korean economy is evaluated. The result shows that labor supply in Korea is relying gradually more on the qualitative rather than the quantitative aspect but since the increase in the former will not fully compensate the decrease in the latter, the potential growth rate of the Korean economy will be substantially reduced in the futrue.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.3
• /
• pp.12-19
• /
• 2000

The purpose of this study is to evaluate the channel changes according to the temporal and spatial distribution of the deposition area by the vegetation invasion in Kyesung-river. The deposition area mainly occurred by landslide and debris flow from the headwater channel. And also the movement of subsequent downstream depends upon the site of deposits by a varity erosional processes. As the age of deposition area is older, it had a tendency to stable by plant invasion relatively. The vegetations grown in deposition area were very effective to estimate a historical deformation process of river-bed occurred by landslide. The vegetations around deposition area consisted of the same as tree species grown in forest area of circumference like Pinus densiflora, Styrax japonica, Quercus acutissima and Salix gracilistyla. If the torrential stream is flooding, the deposition area of 1 to 5 years can be change to the channel easily. Deposition area of 11 to 23 years had a high river-bed because it passed long time since deposited, and amount of sedimention is much more in wide than in narrow channel. It is consider that the change of channel had many influenced by the span of survial time, scale and movement frequency of deposition area after the vegetation invasion.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.207-207
• /
• 2011

본 연구에서는 유역 특성의 판단에 적절한 호우사상을 선별하여 사용하는 것이 어느 정도 효과적인지를 평가하였다. 토양의 습윤 정도에 따른 유역의 특성을 반영하기 위해 AMC 조건을 고려하였으며, 유역의 집중시간 및 저류상수의 추정방법으로는 Nash 모형의 구조를 이용하는 방법을 적용하였다. 아울러 강우의 공간변동 정도를 파악하기 위해 변동계수를 이용하여 평가하였으며, 추정된 매개변수들의 대푯값 및 가능범위를 도시적으로 결정하였다. 이를 유역면적이 큰 충주댐 유역의 영춘 지점과 상대적으로 작은 평창강 방림 지점을 대상유역으로 선정하여, 다양한 호우사상에 대한 분석이 유역의 규모에 대비되어 수행될 수 있도록 하였다. 그 결과를 정리하면 다음과 같다. 강우의 공간변동 정도를 변동계수로 평가한 결과 AMC-III 조건에서 강우강도의 공간적 변동폭이 작음을 확인하였다. 따라서 AMC-III 조건에서 유도한 유출특성이 단위도의 이론에 부합하는 것으로 판단된다. 아울러 AMC 조건에 따라 추정된 집중시간과 저류상수는 AMC-I보다 AMC-III 경우에서 상대적으로 변동폭도 작았으며, 선형저수지의 특성 역시 일관됨을 확인하였다. 특히, AMC-I 조건의 경우는 선행강우가 없는 상태에서의 호우사상들로서 일단 그 크기가 작을 가능성이 크다는 문제점을 가지고 있다. 따라서 AMC-I 조건의 호우사상 보다는 AMC-III 조건의 호우사상을 이용하는 게 보다 홍수 유출 해석에 유리하다고 판단된다. 추정된 매개변수의 대푯값과 그의 가능범위 결정에 앞서, AMC-III 조건에서 추정된 매개변수들이 군집해 있는 구간을 설정한 후, 이를 벗어나는 매개변수를 제외하였다. 다음으로 매개변수의 무게중심 즉, 평균을 중점으로 하여 사분위수(25%, 50%, 75%)에 해당되는 매개변수 개수가 선택되도록 사변형을 작성하였다. 이 때 집중시간과 저류상수 사이의 상관성을 고려하기 위해 사변형은 선형저수지 개수의 선과 선형저수지의 저류상수의 선이 만나는 점을 연결하여 작성하였다. 영춘 지점의 경우, 집중시간의 대푯값은 20.6 hr, 저류상수의 대푯값은 18.4 hr, 방림 지점은 각각 7.5 hr, 8.2 hr이다. 매개변수의 대푯값 가능범위는 충주댐 영춘 지점의 경우 1사분에서 집중시간 18-25 hr, 저류 상수는 17-20 hr 정도, 방림 지점의 경우 집중시간은 5-10 hr, 저류상수는 7-11 hr 정도이다. 아울러 추정된 대푯값의 가능 범위를 이용하여 기존의 경험공식을 평가하였다. 그 결과 집중시간의 경우 Kraven 공식, 정성원 공식이, 저류상수의 경우 Sabol 공식, 정성원 공식, 윤태훈 공식이 대푯값의 범위에 속하는 것으로 분석되었다. 그러나 분석 지점의 부족으로 기존의 경험공식의 정량적 평가는 어렵다. 추후에 보다 많은 지점을 대상으로 분석한다면 보다 설득력이 있는 경험공식의 평가와 다양한 유역에 적합한 경험공식의 산정도 가능할 것이다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.347-352
• /
• 2010

There is a lack of survey standard for cross-to-nature small stream. In this research, we analyzed cross sectional survey data of Sanggachun stream, calculated variant quantity of soil, and suggested a survey interval. Descriptive analysis of cross sectional survey data shows the trend of stabilization; mean interval of survey is 14.91m(min: 7.0m, max: 39m), mean cross sectional variances are $0.82m^2$(min: $-3.80m^2$, max: $8.11m^2$) in 2004, $0.24m^2$ (min: $-5.25m^2$, max: $8.55m^2$) in 2005. Calculating results of variance quantity based on data of 65 cross sections show similar trends in 15m, 30m, 45m, 60m but different with results of 75m, 90m with Post-Hoc Test in statistical verification. We suggested standard cross sectional survey length of cross section for natural style small stream as 50m based on fitting results of standard variation of erosion and cumulation quantity by survey interval.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.109-116
• /
• 1988

The strength and load of structure are varied with the Passage of time, and become a process of probability. It is possible to estimate the reliability from the relation between strength and load. Considering the safety, It is reasonable to estimate allowable stress from the safety factor based on the reliability. In this study, the method to estimate probability of fracture, which is index of reliability for rail subjeict to long term fatigue load were examined. In estimation of reliablity it is meaningless to evaluate numerical value especially this difficult case estimating parameter of random variable. To overcome this problem, conventional design method estimating relative reliability were proposed. In this study the Cornell method were examined. The uncertainity of random variale, ie coefficient of variation which is the index of variation of strength and load were considered. The effect of uncertainity related to probability of fracture, and safety factor based on reliability were examined. The results of this study are followed. The reliability of weld metal were influenced by variation of strength more then load, and base metal were influenced by load. It is confirmed that the allowable stress range calculating with factor of safety based an reliability is conservative.