• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.837-846
• /
• 1989

Belt tension distribution for an abrasive blet grinding was investigated analytically and experimentally for (1) slack side and (2) tight side blet grinding. Classical Eytelwein equation was used to predict the belt tension distribution with dividing contact angles into (1) inactive and (2) active angles. General friction theory was modified based on the friction force between the belt and the support in the grinding contact area that was obtained by experiments. It was found that analytical results were in good agreement with the experimental results. Also, the tight side belt grinding was recommended since it could carry out more grinding load than that of slack side belt grinding.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.4
• /
• pp.143-147
• /
• 2021

The purpose of this study is to investigate how the application of a Thorax belt affects the stability of the spine in subjects with a wide infra-sternal angle. A total of 15 subject with wide infra-sternal angle participated in the experiment. Active Double leg lowering and active one-leg raising were performed with or without a thorax belt. Two spinal stability tests (active double lowering and active one-leg raising) performed with or without thorax belt application showed significant differences between each condition. Based on the results of present study, the application of a thorax belt is considered to be an effective therapeutic tool that can stabilize the spine to subjects with abnormally increased chest cage and spinal or trunk instability.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.307-312
• /
• 1995

장거리 시스템의 경우에 있어서 기동과 정지 시의 동적하중은 구동부 입력크기의 변화와 구동부간이 기동 시간차이로부터 발생되며, 벨트로 전파되어 장력변화를 일으키고, 과도한 장력의 변화는 인장과 압축의 탄성파로 벨트요소의 응력을 증가시키며, 벨트, 풀리, 아이들러(idler)등의 벨트요소들을 파괴시킨다. 따라서 동적해석에 의한 설계가 필수적으로 요구되어 벨트의 동적거동 해석에 대한 연구가 많이 수행되고 있다. 본 연구에서는 벨트 컨베이어 시스템을 집중질량모델(lumped mass model)로 근사하여 모델링하는 방법을 도입하여 세부요소에 대한 운동방정식을 유도하고, 각 요소 모델링을 결합하여 전체 운동방정식을 수립하였으며, 예제 시스템에 적용하여 동적거동을 해석하였다. 예제 시스템에 있어서 기동시의 구동입력을 두 가지 형태의 입력을 이용하였고, 정지시에는 구동부 브레이크가 없는 경우로 정상운전상태에서 순간적으로 구동부의 동력을 제거하는 방법을 적용하였다. 시뮬레이션 결과를 통하여 기동시의 구동입력을 적절히 제어하므로 벨트 속도와 장력의 변화를 줄일 수 있는 입력형태를 결정할 수 있었고, 이 때의 테이크업의 운동도 구할 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.205-209
• /
• 1994

본 연구에서는 오디오용 데크의 음질특성과 벨트구동계의 회전진동 특성과의 연관성을 규명하고자 한다. 이를 위해 벨트구동계를 다자유도 진동계로 모델링하여 회전진동 특성을 규명하고 실험으로 확인하였다. 이의 결과를 실제 데크에 응용하기 위해 각 파라미터의 변화에 따른 특성변화의 경향을 살펴보았으며, 당사에서 개발중인 신모델에서 회전비의 적절한 설계를 제안하여 우수한 음질특성을 확인하였다.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.3
• /
• pp.217-226
• /
• 2006

We report three sawtooth oscillation events observed at geosynchronous orbit where we find quasi-periodic (every 2-3 hours) sudden flux increases followed by slow flux decreases at the energy levels of ${\sim}50-400keV$. For these three sawtooth events, we have examined variations of the outer boundary of the outer radiation belt. In order to determine L values of the outer boundary, we have used data of relativistic electron flux observed by the SAMPEX satellite. We find that the outer boundary of the outer radiation belt oscillates periodically being consistent with sawtooth oscillation phases. Specifically, the outer boundary of the outer radiation belt expands (namely, the boundary L value increases) following the sawtooth particle flux enhancement of each tooth, and then contracts (namely, the boundary L value decreases) while the sawtooth flux decreases gradually until the next flux enhancement. On the other hand, it is repeatedly seen that the asymmetry of the magnetic field intensity between dayside and nightside decreases (increases) due to the dipolarization (the stretching) on the nightside as the sawtooth flux increases (decreases). This implies that the periodic magnetic field variations during the sawtooth oscillations are likely responsible for the expansion-contraction oscillations of the outer boundary of the outer radiation belt.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.91.1-91.1
• /
• 2012

지구 자기권의 입자분포는 지구 자기권의 상태와 태양풍의 물리적 상황에 따라 다르다. 가령, 정지궤도에서 고에너지 입자의 flux가 낮아지는 것이 관측된다. 이러한 flux dropout 기간은 대부분 storm main phase에 해당된다. 반면 태양풍의 속력이 상대적으로 높은 HSS(high speed stream)기간 동안에는 대부분 정지궤도에서의 고에너지 입자 flux가 높아지며 radiation belt의 고에너지 입자들의 seed electron 역할을 할 것으로 예상하고 있다. 본 연구에서는 GOSE 11 위성의 electron flux data와 태양풍의 속도를 이용하여 HSS, quiet time, flux dropout 기간을 정의 하였다. 또한, 지구로부터 7~8Re 떨어진 night side지역을 radiation belt의 trapping boundary 바로 바깥 경계지역과 같다고 가정하였다. 그리고 각 기간 동안 이 경계지역에서 입자들의 분포와 관련된 물리적 조건을 결정하는 것을 목표로 하였다. 이는 방사선 벨트 내부에서의 역학적 진화에 영향을 미칠 수 있다. 2007년 6월부터 2010년 8월까지 이러한 경계지역에 THEMIS 위성이 위치했을 때 ESA와 SST의 omni-directional flux를 이용하여 에너지에 대한 입자플럭스 분포 함수를 산출하였다. 또한 각 기간에 평균한 분포 함수를 가장 잘 나타낼 수 있는 해석적 함수를 도출하였다. 추가로, 경계지역에서의 입자들의 pitch angle 분포 패턴도 결정 하였다. 이 결과는 방사선 벨트의 전산모사에서 실질적인 경계 조건으로 사용될 수 있다.

• Journal of the KSME
• /
• v.33 no.10
• /
• pp.892-901
• /
• 1993

환경오염과 차량 성능향상에 따라서 날로 강화되는 연비규제는 차량용 변속기로서 CVT 양상 보급에 대한 필요를 앞당기고 있다. CVT는 소형차를 중심으로 일부 자동차 에이커에 의해 이미 실용화되어 있으며 일본 및 구미 자동차 각 사는 CVT에 대한 자체기술을 보유하고 경쟁성 있 는 완성품 개발을 위하여 총력을 기울이고 있는 실정이다. CVT에 대한 연구개발의 추세는 동 력전달 구동요소의 특성에 따라 벨트식과 토로이달 (Torodial)식으로 구분할 수 있으며 대부분의 경우 현재 일부 실용화 개발된 벨트식 CVT가 기술완성도가 높은 반면 토로이달롤러의 각도를 연속적으로 변환시킴으로써 무단변속을 이루는 토로이달 방식은 2000년대 이후에 양산을 목표로 일본 및 영국 등에서 개발 진행주이나 새로운 재질과 제어기술개발 등의 숙제를 안고 있다. 벨 트식의 경우 금속벨트는 지난 십 수년이상 시행착오를 겪으며 CVT용으로 개발된 전문업체의 제품이 이미 특허화되어 있기 때문에 자동차 각사는 벨트와 같은 구동요소보다는 CVT 메카니즘 설계 및 제어시스템 개발에 기술력을 투입하고 있다. 따라서 국내 CVT 개발도 이와 같은 추세를 따를 것으로 기대되고 있으나 AT와 같은 완성품으로서의 상품가치를 갖기 위하여는 CVT에 대한 보다 많은 연구개발이 필요하다고 생각된다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.1
• /
• pp.123-132
• /
• 2014

This study aims to develop the diagnostic evaluation method of the riverine ecobelt for construction, conservation, and maintenance of the riverine ecobelt. The value indices in the proposed evaluation method are composed of total 5 fields and 19 elements. The 5 fields are flood control, environmental function, growth of plants, ecobelt function, and restoration potential. Flood control field is composed of total 3 elements such as length, width, and density of green area. Environmental function field is composed of 4 elements such as park use, landscape boundary and edge, microclimate control, non-point pollution control. Growth of plants field is composed of 6 elements such as species composition, forest height, stratum structure, vine plants, plant vitality, and succession of plants. Ecobelt function field is composed of 4 elements such as longitudinal connectivity, lateral connectivity, in-stream forest or habitat, roads on bank top. Restoration potential field is composed of 2 elements such as landform and land use of the immediate vicinity. The score system ranging 1~4 was adopted. The weighting parameters of elements were unified with each other. The final grade system ranging 1~5(1: very good~5: very bad) was adopted, and the final grade was evaluated by the mean values of each field. According to the test application of the diagnostic evaluation method of the riverine ecobelt, the final grades showed effectively the real condition of each site.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.370-379
• /
• 2018

The Korean government announced plans for the International Science Business Belt as a spatial area for promoting the linkage between scientific knowledge and commercialization in 2009. R&D and entrepreneurial activities are essential for the success of the International Science Business Belt. In particular, prioritizing the types of businesses is critical at the cluster establishment stage in that this largely affects the features and development of clusters comprising the International Science Business Belt. This research aims to predict the entry and growth of firms that specialize in four industrial clusters, including Big Science Cluster, Frontier Cluster, ICT Cluster, and Bio-Healthcare Cluster. For this purpose, we employ the Swann & Prevezer's industrial clustering model to identify sectors that affect the establishment and growth of industrial clusters in the International Science Business Belt, focusing on ICT, Bio-Healthcare and Frontier clusters. Data was collected from the 2014 Korean Innovation Survey (KIS) and University Alimi for the ICT cluster, 2014 National Bio Industry Survey and University Alimi for the Bio-Healthcare Cluster, and the 2015 National Nano Convergent Industry Survey and Annual Report of Nano Technology for the Frontier cluster. Empirical results show that the ICT service sector, bio process/equipment sector, and Nano electronic sector promote clustering in other sectors. Based on the analysis results, we discuss several policy implications and strategies that can attract relevant firms for the development of industrial clusters.

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.81-92
• /
• 2021

In this study, we investigated the effects of five EMS lumbar back pressure belts produced on an anatomical basis on lumbar spine stabilization. Five core muscles were selected, including the urinal, vertebral column, endotracheal, external abdominal, and large back muscles, and patterns were designed using a conductive fabric considering the appropriate muscle shape and pain-causing points. We experimented with four motions to examine the effects of different EMS abdominal compression belts on lumbar spine stabilization. Five healthy men in their 20s were selected. The selection conditions include no back pain history for the past three months, no restricted movements through pre-inspection, and the muscular strength of the body should belong to the normal grade. Using SLR, the sequence of experimental actions was chosen from the following but not limited to left-hand, body-hand, and back-line forces. Resting between movements lasted for 2 min, and the experiments were conducted after wearing the EMS abdominal pressure belt. Electrical stimulation was applied for 10 min to increase blood flow and muscle activation. The statistics of the experimental results were analyzed for specific differences by conducting the Wilcoxon and Friedman tests with nonparametric tests. The ranking results of each pattern were successfully assessed in the order of 5, 4, 3, 1, 2 for the five patterns, and we could identify slightly more significant results for experimental behavior associated with each muscle movement. Patterns produced based on anatomy showed differentiated effects when electric stimulation was applied to each muscle in different shapes, which could improve the stabilization of the lumbar spine in everyday life or training to the public. Based on these results, subsequent research would focus on developing smart healthcare clothing that is practical in daily life by employing different anatomical mechanisms, depending on the back pain, to utilize trunk-type tights.