• Journal of the Mineralogical Society of Korea
• /
• v.15 no.4
• /
• pp.243-257
• /
• 2002

Ca-type and Na-type bentonites show the great difference of some physicochemical properties. Na exchanged bentonite is mainly used for the foundry and construction materials in domestic utilization. This study tries to identify in detail the differences of some physicochemical properties and thermal properties between Ca-type and Na-type bentonites. Also the adsorption behavior and interlayer expansion for the HDTMA (Hexadecyltrimethylammonium) exchanged and CP (Cetylprydinium) exchanged Ca-type and Na-type bentonites were compared. Na-type bentonite shows the strong alkaline property, high viscosity and swelling compared to Ca-type bentonite. However, two types are very similar for the cation exchange capacity and MB (Methylene Blue) adsorption. The decomposition of adsorbed and interlayer water of Na-type bentonite is caused in the lower temperature than Ca-type bentonite. And Ca-type bentonite shows the decomposition of structural water in the lower temperature than Na-type bentonite. The interlayer expansion of montmorillonite resulted to the intercalation of HDTMA and CP into bentonite is so strongly caused from 12～15 $\AA$ to $40\AA$ (basal spacing). HDTMA-bentonite is almost expanded to $37～38\AA$ when 200% CEC equivalent amount of HDTMA is added, and CP-bentonite is fullly expanded to 40 $\AA$ in the 140% CEC equivalent amount of CP It means that CP causes the stronger interlayer expansion of montmorillonite and easier adsorption than HDTMA. Adsorption behaviors of CP into bentonite is so stable and continuously sorbed in the proportion to the treatment of amount until 200% of the CEC equivalents. CP-bentonite shows the same adsorption behavior regardless of Ca-type or Na-type montmorillonite.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.2
• /
• pp.135-145
• /
• 2004

A zeolitic bentonite, which exhibits whitish appearance and contains considerable amounts (nearly 〉 5%) of zeolites, frequently occurs as thin beds less than 1 m in Yeongil area. The bentonites are mostly found in closely association with zeolite beds in the Nuldaeri Tuff and Coal-bearing formations of the Janggi Croup. A discordant occurrence of the bentonite against the bedding plane is also locally found. Montmorillonite, the major mineral constituent of the bentonite, is mostly associated with clinoptilolite as a zeolite. However, instead of clinoptilolite, mordenite is sometimes included in the case of more silicic bentonite, and heulandite in the less silicic one. It is characteristic that the mordenite is accompanied by lots of opal-CT in the silicic bentonite. SEM observations characteristically indicate that these authigenic phases, especially the montmorillonite and zeolite, nearly coexist as mixtures not forming a fine-scale zoning. The zeolitic bentonite seems to be formed in the comparatively silicic pore fluid at the alkaline condition accompanying pH fluctuation Compared to the zeolite-free normal bentonite, the zeolitic types exhibit somewhat higher REE abundance. These chemical characteristics, together with modes of occurrences and authigenic mineral associations, may suggest that the zeolitic bentonite is not merely diagenetic products and a possible hydrothermal alteration could not be excluded in the bentonite genesis.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.2
• /
• pp.111-127
• /
• 1994

양남 지역의 제 3 기층인 하서리 응회암층의 중.상부에 부존되는 벤토나이트들은 원암의 암상과 화학조성에 의존되는 광호 양상과 광물상을 나타낸다. 벤톤나이트들은 대부분 안산암질 원암의 기원을 시사하는 희유 및 희토류 원소들의 함유 양상을 보이고, 현무암질 원암의 벤토나이트는 최상부의 일부 층준에만 그 산출이 국한된다. 이 지역의 벤토나이트는 주로 유리질 내지 라필리 응회암이 속성 변질된 것으로 이 과정에서 SiO2와 알칼리 (Na, K) 성분들이 고갈되는 화학 성분상의 유동 양상이 인지된다. 벤토나이트는 주된 광물 성분인 스멕타이트 이외에 흔히 단백석 및 석영같은 규산 광물과 휼란다이트, 모데나이트 및 클리높틸로라이트간은 불석광물들을 수반한다. 스멕타이트는 대부분 몰노릴로나이트 유형이지만 최상부 층준의 현무암질원 벤토나이트와 비교하여 논트로나이트의 광물 화학, X-선회절 양상, 층간 화학 및 염화학적 특성 등이 논의되었다. 이 지역 벤토나이트의 형성과정은 (1) 화산쇄설물의 급속한 퇴적, (2) 비이상적으로 높은 매몰 온도(<8$0^{\circ}C$) 조건, (3) 규산 광물의침전에 의한 공극수 내외 H4SiO4의 제거, (4) 원암의 낮은 Si/al 함유비와 높은 Fe 함유도 등에 의해서 조장된 것으로 해석된다.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.2
• /
• pp.1-10
• /
• 2019

This study was intended to evaluate the water permeability and structure for calcium bentonite-sand mixtures to utilize calcium bentonite as a liner. This study conducted physico-chemical properties tests, compaction tests, permeability test and Scanning Electron Microscopy analysis (SEM) analysis. It was found the higher the ratio of calcium bentonite, the lower the dry density with coefficient of permeability, and the higher the optimum moisture content. In particular, SEM analysis was found the higher the ratio of calcium bentonite, the higher the area of the montmorillonite particles. In conclusion, the optimum coefficient of permeability that finds the landfill liner condition (must be less than $1{\times}10^{-7}cm/sec$) was obtained when the ratio of calcium bentonite was 40% or higher. These findings may improve the understanding of the calcium bentonite as a liner. Calcium bentonite shows a similar permeability to sodium bentonite 7% when mixed at 40% or more. Therefore, it is considered that calcium bentonite can be utilized as a liner.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.1
• /
• pp.33-40
• /
• 2011

In the compacted bentonite containing $Ag_2O$, the transport of iodide ion was investigated by Through-diffusion method. It is confirmed that Iodide ion is transported by diffusion process in the compacted bentonite containing $Ag_2O$ as well as in the compacted bentonite without $Ag_2O$. However, the lag-time of iodide ion in the compacted bentonite containing $Ag_2O$ is larger than that in the compacted bentonite without $Ag_2O$. The increase of the lag-time was observed in pure iodide ion solution and also in 0.1M NaCl-iodide ion solution. The apparent diffusion coefficient of iodide ion in the compacted bentonite containing $Ag_2O$ has lower value than that in the compacted bentonite without $Ag_2O$. The effect of $Ag_2O$ on the effective diffusion coefficient was not clearly investigated in the compacted bentonite containing $Ag_2O$ while the values of effective diffusion coefficient of iodide ion in the compacted bentonite without $Ag_2O$ obtained in this study were similar to those in the compacted bentonite reported in the literature.

• Mineral and Industry
• /
• v.13 no.1
• /
• pp.1-17
• /
• 2000

국내에서 벤토나이트 산업은 환경개선과 관련된 토목분야에서의 수요증대로 앞으로 그 시장이 보다 확장될 것으로 예견된다. 이에 따라 부족한 국내의 부존자원을 효율적으로 관리하는 개발기술의 수립과 제도적 정비가 마련되어야 할 것이다. 또한 날로 증대되는 벤토나이트는 매우 복잡한 광물조성과 광물학적 특성을 갖고 다양한 용도로 사용되기 때문에, 이를 취급하는 데에는 이 광물자원에 대한 광물학적 특성에 대한 전문적 이해가 요구된다. 벤토나이트의 품위는 종래의 간접적 측정 방식 외에 정량적 X-선회절법이 도입되면 보다 효율적으로 평가될 수 있을 것이다. 벤토나이트의 품위와 품질은 상호 연계되지만 별도의 개념으로서, 이를 응용광물학적 지식에 기반하여 효과적으로 평가하는 방안이 마련되어야 할 것이다. 국내에서 벤토나이트가 고령토 범주 내에서 취급되고 있는 것은 이 분야에 대한 산업 발전은 물론 기술개발을 가로막고 있는 큰 장애로 생각되며, 이는 빠른 시일 내에 시정되어야 할 것이다.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.507-515
• /
• 1994

Fly ash and betonite samples were selected and characteristics of them were investigated. Fly ash was found to be similar to bentonite in particle size distribution but quite different in microstructure. The most special aspect of fly ash was high alkalinity of its solution. Distribution coefficients of Cs and Co on the samples were measured to survey the effects of mixing. Fly ash showed higher distribution coefficient of Co than that of Cs. Through various experiments, factors affecting the distribution coefficients of Co and Cs on mixture of bentonite and fly ash were identified. Comparison of the distribution coefficients of Cs on fly ash and bentonite mixture with those on sand and bentonite mixture suggests that fly ash would be useful as an efficient additive of backfill material if pertinent mixing ratio was chosen.

• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.193-213
• /
• 2020

A mathematical model to simulate more realistically the penetration of compacted bentonite buffer installed in the deposition hole into the discontinuity in the excavation damaged zone formed at the inner wall of the deposition hole in the geological repository for spent fuel is developed. In this model, the penetration of compacted bentonite is assumed to be the flow of Bingham fluid through the parallel planar rock fracture. The penetration of compacted bentonite is analyzed using the developed model. The results show that the maximum penetration depth of compacted bentonite into the rock fracture is proportioned to the swelling pressure of saturated compacted bentonite and the aperture of rock fracture. However, it is in inverse proportion to the yield strength of compacted bentonite. The viscosity of compacted bentonite dominates the penetration rate of compacted bentonite, but has no influence to the maximum penetration depth.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.11
• /
• pp.97-104
• /
• 2017

A bentonite mixing with local soil widely used as liner layer for landfill should have low permeability less than $1{\times}10^{-7}cm/s$. But there are several limitations of bentonite used as liner layer, such as drying shrinkage cracking, ineffective waterproof ability under salt water condition like flocculation under sea water. The purpose of this research is the development of a salt resistance bentonite by mixing sepiolite and guar gum to overcome the weak points of bentonite to get high water resistance capacity and permeability coefficient below $1{\times}10^{-7}cm/s$ under salt water condition. After having performed drying shrinkage cracking test, swelling index test, compaction test, and hydraulic conductivity test we confirmed the optimal mixing ratio of materials and evaluated the performance of materials.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.400-414
• /
• 2021

Under high-level radioactive waste repository conditions, bentonite as an engineered barrier material undergoes thermal, hydrological, mechanical, and chemical processes. We report the applications of X-ray Computed Tomography (CT) imaging technique on the characterization and analysis of bentonite over the past decade to provide a reference of the utilization of this technique and the recent research trends. This overview of the X-ray CT technique applications includes the characterization of the bentonite either in pellets or powder form. X-ray imaging has provided a means to extract grain information at the microscale and identify crack networks responsible for the pellets' heterogeneity. Regarding samples of pellets-powder mixtures under hydration, X-ray CT allowed the identification and monitoring of heterogeneous zones throughout the test. Some results showed how zones with pellets only swell faster compared to others composed of pellets and powder. Moreover, the behavior of fissures between grains and bentonite matrix was observed to change under drying and hydrating conditions, tending to close during the former and open during the latter. The development of specializing software has allowed obtaining strain fields from a sequence of images. In more recent works, X-ray CT technique has served to estimate the dry density, water content, and particle displacement at different testing times. Also, when temperature was added to the hydration process of a sample, CT technology offered a way to observe localized and global density changes over time.