• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5602-5609
• /
• 2014

This study examined the remineralization effect of CPP-ACFP according to the etching time and the frequency of application. A CPP-ACFP paste was formed from a combination of CPP-ACP paste and fluorine. The remineralization effect of CPP-ACFP was measured according to the etching time and the frequency of applications of CPP-ACFP. The microhardness of 64 teeth was measured as the sound sample and observed by scanning electron microscopy. As a result, the effect on remineralization of the enamel increased with increasing etching time and frequency of application. Therefore, a CPP-ACP paste combination to fluorine in the tooth mineral CPP-ACFP paste fluoride application can be supplied with the material-advisable enamel remineralization.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.43-50
• /
• 2005

The purpose of this study was to evaluate the effects of a sealant resin on enamel demineralization In orthodontic bracket bonding. The forty eight extracted sound bovine teeth were subdivided into four groups and treated with Phase II (Reliance, itasca. III) on the surface Group 1 was not treated. Group 2 was acid etched with 37% phosphoric acid for 30 seconds. Group 3 was applied with sealant after acid etching. Group 4 was applied with resin paste after acid etching and sealant application. Each group was demineralized in artificial caries solution. Demineralized enamel depth was measured by confocal laser scanning microscopy. The results were as follows: the mean demineralized enamel depth was $47.4{\mu}m$. (Group 1), $61.8{\mu}m$ (Group 2), $13.9{\mu}m$ (Group 3). $8.2{\mu}m$ (Group 4) the demineralized enamel depth was increased in Group 2 than in Group 1 (p<0.05); the demineralized enamel depth was reduced in Group 3 than in Group 1 and Group 2 with statistically significant differences (p<0.05): and demineralization in Group 4 was very little. The results of the present study indicate that sealant application is useful for reducing enamel demineralization in orthodontic bracket bonding.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.1
• /
• pp.84-91
• /
• 2002

The purpose of study was to assess the influence of acidic drinks on the erosion of tooth enamel and the effect of fluoridated saliva on the remineralization. Twenty five drinks were sampled. The erosive potential and remineralizing effect were measured by the tooth surface microhardness test. The pH of most drinks were below pH 5.5. Reduction rates of enamel surface hardness by the flavored carbonated drink were 16.90%, 25.11%, 35.10%, and 41.62% after 5, 10, 30, and 60 minutes of demineralization, and recovery rates by remineralizaing solution were 61.52%, 67.96%, 72.13% and 75.93% after 1, 24, 48, and 72 hours of remineralization, respectively. The results suggest that the most drinks in the markets have the potential to erode the teeth and that erosion occurs fast but remineralization proceeds slowly.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.601-606
• /
• 2009

Amelogenesis Imperfecta (AI) is a genetic disorder which retards the development of enamel and it can be classified into three types: hypoplastic, hypomaturation, hypocalcified type. This can occur both in deciduous and permanent dentition. A 8 year 8 month old patient with a chief complaints of delayed eruption on upper anteriors, calculus deposit on lower anteriors and anterior openbite visited the clinic. Anteriors had thin layer of enamel and were very narrow. Especially lower anteriors had rough surface and were in bad shape. Teeth were very hypersensitive to thermal changes. Upper and lower first molars showed severe attrition on the occlusal surface. Radiographs also verified hypoplastic enamel in the whole dentition including the teeth in the tooth bud. The patient was diagnosed as hypoplastic AI, and is being treated at the pediathc and prosthodontic department of the Kyunghee dental university hospital. To improve the function, esthetics, hypersensitivity of the AI patients, restorations on the posteriors and the anteriors with oral hygiene instruction are necessary, Constant follow-up check is needed until full growth and after full growth, cooperative care with the other department is needed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.728-734
• /
• 2001

The purpose of this study was to investigate the effects of Er:YAG laser on cutting of efficacy of enamel and dentin in primary and permanent teeth. We used the enamel and dentin specimens of human teeth which contain the physiologic saline and maintain the pulpal pressure in dentinal tubules. Each specimen was exposed to Er:YAG laser with non-contact mode under different treatment condition of irradiation energy, pulse repetition rate. We investigated the cutting efficacy of Er:YAG laser by Scanning Intensity Microscopy, and obtained following results. 1. Cutting volume of enamel and dentin in primary and permanent teeth were increased by increasing the irradiation energy, pulse repetition rate. 2. Cutting volume of primary teeth was larger than that of permanent teeth. 3. Cutting volume of dentin was larger than that of enamel in primary and permanent teeth. From these results, Er:YAG laser would be more effective in cutting dentin than enamel, and in cutting primary teeth than permanent teeth for clinical application.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.201-206
• /
• 2006

A recent laboratory study has demonstrated improved caries lesion resistance with enamel that was exposed to $CO_2$ laser irradiation for very short time period. When topical fluoride treatment was performed before or after laser irradiation, reductions in dental caries. The purpose of this scanning electron microscopic(SEM) study and atomic force microscope study was to characterize surface alterations in tooth enamel after in vitro laser irradiation alone and combined topical fluoride treatment either before or after laser irradiation. The treatment effects of laser irradiation led to the formation of an irregular, mild porosities and fine fissures, also created granular materials. But when laser irradiation was followed by APF, the enamel surface had homogenous architecture. The result led to the caries resistance effects by these granular structures have been considered to represent redeposited mineral phases due to the mobilization of calcium, phosphate, and fluoride from lased enamel.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.272-285
• /
• 2003

This study was conducted to observe the microscopic structures of cavities formed after ablation of primary teeth, permanent teeth, enamel and dentin in using a bur and cavities formed after ablation using laser and the following results were obtained after comparing the effects of ablation. Using a #330 bur and Er:YAG laser irradiated at 150 mJ, 200 mJ, 250 mJ and 300 mJ all at the frequency of 5 Hz, 1 mm enamel and dentin samples were ablated and the ablation time was measured. In order to measure the surfaces ablated, 5 each of primary teeth and permanent teeth were ablated using a #330 bur and Er:YAG laser at 150 mJ, 200 mJ, 250 mJ and 300 mJ for 1 sec and the cross section and vertical section were observed. The following results were obtained : 1. Cutting time of Er:YAG laser was longer than that of conventinal high-speed bur regardless of teeth type. 2. Cutting on enamel, Cutting time of conventional high-speed bur in deciduous teeth was longer than in permanent teeth(P<0.05). But Er:YAG laser was not showed any difference between the deciduous and permanent teeth(P>0.05). 3. Cutting on dentin, Cutting time of conventional high-speed bur in permanent teeth was longer than deciduous teeth. Er:YAG laser of 150 mJ, 5 Hz in permanent teeth was longer than in deciduous teeth(p<0.05). But laser of other power did not showed mean difference. 4. The cavity surface treated with the convetional high-speed bur revealed a relatively flat appearance, almost covered with a debris-like smear layer. Cavity wall showed striped appearance because of blade of bur. 5. The cavity surface treated by the Er:YAG laser system was irregular or rough surface with the absence charring, carbonization, or cracking of the dentin. In addition, there was an absence of a smear layer. Cavity floor was round and relatively smooth. According to these results, cutting time of Er:YAG laser was almostly same in permanent and deciduous teeth, but more effective in dentin than enamel. Cutting the sample, Er:YAG laser was needed more time than conventional bur. But SEM findings suggested that laser device produced favorable surface characteristic(i.e, no smear layer, irregular surface, cracking).

• Journal of Oral Medicine and Pain
• /
• v.26 no.4
• /
• pp.395-406
• /
• 2001

지난 수십년동안, 다양한 레이저기기를 이용하여 치아 경조직에 대한 응용 실험을 수행되었다. 그러나, 발생한 주요한 문제는 열발생과 플라즈마 형성과 같은 부작용이 지속된다는 점이었다. 실망스러운 실험결과에 따라 치아 삭제에 대한 레이저의 응용에 대한 연구가 거의 진행되지 못하였다. 본 연구의 목적은 국내에서 처음으로 개발된 얼비움레이저기기를 사용하여 다양한 에너지 수준과 다양한 펄스빈도에서 법랑질의 삭제율을 비교하고자 하였다. 본 연구에 사용된 레이저기기는 국내에서 최초로 개발된 $2.94{\mu}m$ 펄스를 $250{\mu}s$ 방출하는 얼비움야그레이저 기기이다. 기기의 에너지는 20 mJ에서 350 mJ까지 다양하게 방출하며, 최대 출력은 3.5 W이다. 22개의 치아를 에폭시 레진에 포매하고 경화하였다. 치아의 법랑질을 회전 다이아몬드 칼을 흐르는 물과 함께 사용하여 협측 또는 설측으로 평탄하게 삭제하였다. 제작된 법랑질표면은 6개의 구획으로 구분하여 에너지 수준과 펄스빈도에 따라 조사하였다. 본 연구에서 사용된 표본 수는 132개이며, 삭제율을 조사하기 위한 모든 표본은 22개의 실험 군으로 분류하였다. 실험결과는 다음과 같다. 1. 에너지 수준간에는 유의한 삭제율의 차이가 있었다. 2. 40 및 80 mJ로 조사한 경우에는 펄스빈도 간에 차이가 없었지만, 120 mJ의 출력으로 동일한 에너지를 조사한 경우에는 20 Hz가 40 또는 80 mJ로 조사한 경우 보다 가장 삭제효과가 높았다. 3. 연속조사 한 경우 조사시간 경과에 따라 법랑질의 삭제율은 증가되지 않았다. 결론적으로 효과적으로 법랑질을 삭제하기 위해서는 적절한 에너지와 펄스의 레이저를 사용해야 하며, 또한 항상 정확한 초점거리를 유지해야 할 것으로 사료된다.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.605-611
• /
• 1995

The purpose of this study was to evaluate effects of time on shear bond strengths of a light-cured glass ionomer cement and chemically cured resin cement to enamel, and to observe the failure patterns of bracket bondings. Shear bond strength of a light-cured glass ionomer cement were compared with that of a resin cement. Metal brackets were bonded on the extracted human bicuspids. Specimens were subjected to a shear load(in an Instron machine) after storage at room temperature for 5 and 15 minutes; after storage in distilled water at $37^{\circ}C$ for 1 or 35 days. The deboned specimens were measured In respect of adhesive remnant index. The data were evaluated and tested by ANOVA, Duncan's multiple range test, and t-test, and those results were as follows. 1. The shear bond strength of light-cured glass ionomer cement is higher than that of resin cement at 5 and 15 minutes. 2. The shear bond strengths of both light-cured glass ionomer cement and resin cement increase with time. There was no significant difference in those of both 1 day group and 35 day group 3. Light-cured glass ionomer cement is suitable as orthodontic bracket adhesives

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2523-2529
• /
• 2009

The purpose of this study was to observe the demineralization effects of children's range beverage on bovine enamel. 15 bovine teeth without dental caries were divided into 4 experimental groups (n=12) and control group (n=3). All samples immersed in beverages maintained 48 hours by $37^{\circ}C$ in incubate respectively. The surface microhardness values(${\Delta}VHN$) between before and after 48 hours treatment decreased and DIGNOdent value increased because enamel surface were corroded by experimentation beverage. Especially, there was statistical significantly difference in the carbonated drink. Morphological changes by scanning electron microscope were indicated that children's range beverage cause significant enamel demineralization effects on bovine tooth surface among five beverages.