• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.188-188
• /
• 2011

작년 아이슬란드에서의 화산폭발로 발생된 화산재가 대기 중으로 이동하면서 유럽 공항 곳곳의 항공기 수천 편이 운항 중지되기도 하였다. 한반도내의 백두산은 약 1000전(서기 946년~947년 경) 대규모로 분화하였고, 서기 1903년, 소규모 분화한 후, 앞으로 수년~수십 년 사이에 폭발적인 분화를 재개할 가능성이 제기되고 있으며, 백두산 분화 시, 아이슬란드 화산폭발 때보다 훨씬 심각한 피해가 예상되고 있다. 따라서 백두산 화산에 대한 현지 자료의 수집과 꾸준한 모니터링(감시, 관측) 자료의 분석과 재해 예상 범위 및 대응 방안의 모색이 필요한 시점이다. 본 연구에서는 지리적으로 가까이 있으며 108개 활화산의 화산재해 방재에 관하여 꾸준히 활동하고 있는 일본에서의 화산감시 및 분화대응 시스템을 파악하고, 우리나라의 화산재해대책을 수립하기위한 시사점들을 고찰하였다. 화산의 평균적인 분화 간격은 풍수해나 지진 등 다른 재해에 비해 길기 때문에 일본 기상청에서는 과거１만년 이내에 분화한 증거가 있는 화산이 활화산으로서 인정되고 있다. 백두산은 약 1000년 전에 분화한 뒤 최근 분화의 전조현상을 보이고 있으며, 중국과 북한에 인접하여 있으므로 우리나라에 직접적인 피해는 예상되지 않으나, 우리나라에 일본과 같은 활화산이 존재하지 않기 때문에 생소하였던 화산재해란 어떠한 것이며, 향후 잠재적인 분화 가능성을 가지고 있는 백두산폭발로 인한 재해의 종류를 미리 예상하고 준비할 필요가 있다. 일본의 경우 계속적인 감시와 관측을 통한 분화예보, 경보를 발령하고 분화 시 즉각적인 방재정보를 전달, 지역주민들이 빠르게 인지, 주의하도록 화산재해 대책 시스템이 갖추어져 있다. 우리나라는 아직 중국과 북한에 인접한 백두산에 대한 관측 자료가 거의 없고, 연구를 위한 접근 또한 쉽지 않은 상황이다. 분화로 인한 직접적인 영향권에서는 벗어난다할지라도 계절적인 기상장의 영향 및 아직 예측 불가능한 백두산의 잠재적인 폭발규모에 따라 간접적인 영향을 받을 경우에 대비하여야 할 필요성이 있다고 사료된다. 또한 우리나라의 화산재해 방재력을 향상시키기 위하여 백두산 폭발로 인한 재해위험범위를 가시화하고, 분화 시에 대한 구체적인 가상시나리오를 작성하여, 화산재 및 대기오염물질의 확산시뮬레이션, 기후변화에 끼치는 영향 등을 포함하는 화산재해대책을 미리 세워 피해를 저감시킬 수 있는 방재대책을 수립해야 할 것이다.

• Convergence Security Journal
• /
• v.14 no.2
• /
• pp.17-24
• /
• 2014

Form of backdoor penetration attacks "trapdoor" penetration points to bypass the security features and allow direct access to the data. Backdoor without modifying the source code is available, and even code generation can also be modified after compilation. This approach by rewriting the compiler when you compile the source code to insert a specific area in the back door can be due to the use of the method. Defense operations and the basic structure of the backdoor or off depending on the nature of the damage area can be a little different way. This study is based on the diagnosis of a back door operating mechanism acting backdoor analysis methods derived. Research purposes in advance of the attack patterns of malicious code can respond in a way that is intended to be developed. If we identify the structures of backdoor and the infections patterns through the analysis, in the future we can secure the useful information about malicious behaviors corresponding to hacking attacks.

• Analytical Science and Technology
• /
• v.18 no.4
• /
• pp.338-343
• /
• 2005

In this work, sample loss of reduced sulfur compounds (RSC) was investigated with respect to bag sampling techniques. For comparison purpose, calibration slopes were obtained by analyzing standards prepared by 'within syringe dilution' (WSD) method against those made either by 'Tedlar bag dilution' (TBD) or by 'polyester aluminum bag dilution' (PBD) method. The results indicated that the recovery rate of TBD showed the mean values of about 87%, while those of PBD about 77%. Despite the fact that sample loss is inevitable, precise sampling of reduced sulfur compounds may still be possible, if one acknowledges and be prepared for such loss rates of bag sampling methods.

• Journal of Sericultural and Entomological Science
• /
• v.4
• /
• pp.51-55
• /
• 1965

The aim of this work was to investigate the rate of hybrid vigor among the $F_1$ hybrids. The results obtained are as follows; 1. The rate of hybrid vigor in outbreedings(E$\times$J, ＆ J$\times$C) was higher than that in inbreedings in all the metric characters, especially in moulting laval weight. 2. In outbreedings, the $F_1$ between Europe and Chinese strain showed considerably higher rate of hybrid vigor than that of Japanese and Chinese. 3. The hybrid vigor rate of moulting larvel weight gave rise to be significant differences among the strains due to the maternal effects from newly hatched larvae to pupae.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.499-501
• /
• 2008

본 논문은 공진요소를 포함한 고전압 플라이백 컨버터의 설계 절차를 제시하는 것으로써, 고압 플라이백 컨버터 설계 시 기존 플라이백 컨버터의 Power Stage 설계 식을 적용하였을 때 원하는 출력 전압을 얻지 못한다. 고전압을 발생시키기 위한 고전압 플라이백 변압기는 2차 측의 많은 권선수와 높은 전압 때문에 기생 커패시턴스(parasitic capacitance)가 매우 크고, 과도상태에서 컨버터 전류 및 전압의 기생 공진(parasitic resonance)이 심각하게 발생한다. 이러한 공진요소를 고려하여 고전압 플라이백 컨버터의 특성을 해석하고 설계 절차를 제시한다. 이를 통해 고전압 플라이백 컨버터의 소형화 및 경량화를 도모하고, 고압 전원장치의 기술 축적을 위해 연구되었다. 제안된 회로의 동작원리를 설명하고, 타당성을 실험을 통하여 검증한다.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.37-41
• /
• 2004

Parallel combination of cold chathode fluorescent lamps (CCFL) are widely used as the light sources of LCD TV backlight. Brightness uniformity is safisfied by using one transformer per one CCFL. Instead of using one transformer per oneCCFL, one transformer is used to drive 8 CCFLs by using differential driving method. A differential driving inverter with two transformers is developed to drive 16 CCFLs of 26' backlight for LCD TV. The brightness uniformity of $88\%$ was obtained by driving 26' backlight with the developed differential driving inverter successfully.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.3
• /
• pp.168-170
• /
• 2013

A new species, Euonymus baekdusanensis M. Kim (Celastraceae), has been named and described from Mt. Baekdu of the Korean peninsula. Euonymus baekdusanensis shares several characteristics (4-merous flowers, 4-angled capsule, warted branches and twigs, etc.) with its related species E. verrucosus Scopoli. It is, however, distinct from E. verrucosus which have small oblong leaves (6-7 cm), short petioles (1-2 mm), and small capsules (6-8 mm) by having large elliptical leaves (11-13 cm), long petioles (6-8 mm), and large capsules (12-15 mm).

• Journal of Korean Foot and Ankle Society
• /
• v.23 no.1
• /
• pp.35-38
• /
• 2019

Lipoma arborescens or synovial lipomatosis is a rare disorder that is characterized by mature fat infiltration of the hypertrophic synovial villi, most frequently affecting the supra-patellar pouch of the knee. This paper presents a case of lipoma arborescens of the ankle joint bilaterally in an adult patient with involvement of both the intra-articular synovium and the synovial sheath of the tendons around the ankle.

• Food Science and Preservation
• /
• v.23 no.4
• /
• pp.522-529
• /
• 2016

Clean rice is useful to save time and labor force against washing rice in the household. Nevertheless the quality characteristics of the rice were not established well since the quality characteristics of the rice depend on types of the processing system. The aims of the current study were to understand the quality characteristics of clean rice prepared from the dry, semi-dry, and wet types of processing systems, and to suggest the appropriate processing system for production of clean rice. Here, we found that the quality of clean rice was improved with the increasing whiteness of rice by the dry type, although the whiteness of rice should be below 42 to satisfy 16.0 NTU of the turbidity for higher head rice ratio. Also, both the semi-dry and wet type systems showed higher ratio of head rice than the dry type system at below 16.0 NTU of the turbidity. These results imply that the wet type is more suitable for the place where rice is consumed fast, and the semi-dry type is more proper for long term storage of rice.

• Korean journal of food and cookery science
• /
• v.13 no.5
• /
• pp.569-577
• /
• 1997

The characteristics of an watery type Kimchi prepared without the addition of red pepper, were investigated focused on the effect of salt concentration and fermentation temperatures. The Chinese cabbage was brined in various NaCl solution to obtain the final salt concentration range of 0.5∼3.0% of the brined cabbage. Fermentation of Baik Kimchi was carried out at 10, 20, 30$^{\circ}C$ with addition of equal weight of water to brined cabbage. The result showed that the fermentation was generally increased as the NaCl concentration decreased for all temperatures based on the data of pH and total acidity. The higher temperature resulted in an increase in fermentation rate in terms of pH and total acidity. The organoleptic flavor properties of fresh sourness and acidity were significantly affected by NaCl concentration and fermentation temperatures. The Baik Kimchi prepared with 1.0% NaCl and fermentation at 30$^{\circ}C$ was found to be most acceptable.