• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.107-107
• /
• 2014

p형 자원 친화형 산화물 기반 능동형 층 성장에 대한 연구는 아직 개발 초기 단계이다. $Cu_2O$는 이러한 자원 친화형 저가 p형 산화물 중 하나로서 다양한 광학 응용분야에 있어 적용되고 있으며 특히 저가형 증착법인 전기증착법을 통해 형성시킨다면 가격 절감을 극대화 시킬 수 있다. 하지만 낮은 전도성으로 인해 전자소자에는 적용시키기 어렵다는 단점이 있기 때문에 본 연구팀은 5족 물질인 Antimony 를 $Cu_2O$의 p형 도펀트로 적용시켜 전기적 구조적 특성을 개선시키고자 하였다. 결과적으로 [111] 방향으로 높은 우선배향성을 갖고 전도성이 향상된 Sb-Cu2O 박막을 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.9-13
• /
• 1995

In this paper, Zinc Oxide films, with a high degree of c-axis orientation, have been grown on glass substrates by a rf magnetron sputtering. The maximum crystal orientation was found to occur with substrate temperature 150$^{\circ}C$, input power 190W, oxygen rate 50%, target-substrate distance 55mm. It is proposed to achieve high-resistivity ZnO films by increasing the annealing temperature. The piezoelectric layers, preferred oriented with (002) perpendicular to the layer with 4.9$^{\circ}$, could be obtained by the annealing temperature 300$^{\circ}C$ in oxygen atmosphere. It is indicated that the relative permittivity is range from 8.9 to 9.8 in the frequency ranging from 10KHz to 5MHz.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.761-763
• /
• 1998

In this paper, Co-Cr thin films which are known for a excellent perpendicular magnetic recording media were prepared. Changing target- substrate distance, Ar gas pressure and arriving atoms, the incident angle and c-axis orientation properties by using the facing targets sputtering system. We evaluated the c-axis dispersion angle by measu ring half-height width with Micro area X-Ray Diffractometer, measured the thickness of thin film with Ellipsometer. The magnetic properties were compared measuring in-plane squareness and perpendicular coercivity with vibrating sample Magnetometer.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1542-1545
• /
• 2002

Experimental works were performed to implement the hetero-epitaxial growth of diamond films on the (100)- and (111)-oriented Si substrates. The deposition process used to prepare diamond films consisted of a bias-enhanced nucleation(BEN) step, accompanied with a growth step using a microwave plasma CVD system. The highly oriented diamond films were deposited under the growth condition of relatively low methane concentrations and high temperatures. Material properties and surface morphologies of deposited diamond films were improved by the addition of carburization step into the deposition process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.133-135
• /
• 2006

SBN60 and SBN60/30 thin films were deposited by ion beam sputtering technique. Using the ceramic target of the same composition and Pt(100)/$TiO_2$/$SiO_2$/Si or Pt(111)/Ti/$SiO_2$/Si substrate, crystallization and orientation behavior as well as electric properties of the films were examined, Thickness was controlled to $3000{\AA}$ and the films were heat-treated at $650^{\circ}C{\sim}800^{\circ}C$. The orientation and crystallization behavior were observed which showed the dependence on processing condition($O_2$/Ar ratio, substrate temp, annealing temp...).

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.12
• /
• pp.560-564
• /
• 2006

ZnO thin films were prepared by RF magnetron sputter deposition on p-Si(100) wafer with various cooling rates of substrate temperature such as the substrates were pre-heated to $400^{\circ}C$ before the deposition and then cooled down naturally or slowly to $300^{\circ}C,\;200^{\circ}C,\;100^{\circ}C$, and R.T. by the temperature controller during the deposition. Crystalline and micro-structural characteristics of the films were investigated by XRD and SEM. ZnO films which cooled down naturally or slowly by the temperature controller during the deposition, especially the film were deposited with cooling down from $400^{\circ}C\;to\;200^{\circ}C$ slowly. showed the most outstanding c-axis preferred orientation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.324-327
• /
• 2000

ZnO(Zinc Oxide) thin films were deposited on glass substrate by Facing Targets Sputtering. Facing Targets Sputtering system can deposit thin films in plasma-free situation and change the sputtering conditions in wide range. The characteristics of ZnO thin films deposited at variation of sputtering conditions films thickness, power and substrate temperature were evaluated by XRD(x-ray diffractometer), ${\alpha}$-step (Tencor). The excellently c-axis oriented ZnO thin films were obtained at sputter pressure ImTorr, power 150W, substrate temperature 200$^{\circ}C$. In these conditions, the rocking curve of ZnO thin films deposited on glass was 3.3$^{\circ}$.

• Journal of Surface Science and Engineering
• /
• v.31 no.4
• /
• pp.217-222
• /
• 1998

The Facing Targets Sputtering(FTS) system has several advantages for preparing films over a wide range of working gas pressure on plasma-free substrates. Co-Cr thin films seem to be one of the most promising media for perpendicular magnetic recording system. In this study, the capabillities of the system fordepositing C0-Cr films have been investigated. Under various Ar gas pressure, films with morphologically dense microstructure and good c-axis orientation were deposited, even when the incident angle $\psi_x$ of sputtered part icles to the film plane was below abount $50^{\circ}C$. this may imply that the shadowing effect by obique incidence of particle can be compensated by rapid surface diffusion owing to the high kinetic energy of particles arriving at the growing film. It has been confirmed that the FTS system is very useful for perparing Co-Cr thin films recorging media.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.901-904
• /
• 2000

In order to investigate the effect of deposition conditions on crystallographic properties of ZnO thin films by Facing Targets Sputtering system which can deposit thin films in plasma-free situation and change the deposition conditions in wide range. The characteristics of zinc oxide thin films on power, inter targets distance, and substrate temperature were investigated by XRD(x-ray diffractometer), alpha-step (Tencor) analyses. The excellently c-axis oriented zinc oxide thin films were obtained at sputter pressure 1mTorr, sputtering current 0.4A, substrate temperature 300$^{\circ}C$, inter target distance 100mm. In these conditions, the rocking curve of zinc oxide thin films deposited on Glass was 3.9$^{\circ}$.

• Journal of Surface Science and Engineering
• /
• v.33 no.4
• /
• pp.229-232
• /
• 2000

C-axis oriented zinc oxide thin films were deposited on glass substrate by reactive Facing Targets Sputtering (FTS) system. The characteristics of zinc oxide thin films on power, inter targets distance, and substrate temperature were investigated by XRD(x-ray diffractometer), alphastep (Tencor) analyses. The Facing Targets Sputtering system can deposit thin film in plasma-free situation and change the deposition condition in wide range. The excellently c-axis oriented zinc oxide thin films were obtained at sputter pressure 1mTorr, sputtering current 0.4A, substrate temperature $300^{\circ}C$, inter targets distance 100mm. In the conditions, the rocking curve of zinc oxide thin films deposited on ZnO/Glass was $3.9^{\circ}$.