• Title/Summary/Keyword: 배합특성

Search Result 1,649, Processing Time 0.037 seconds

Mixed Carbon/Polypyrrole Electrodes Doped with 2-Naphthalenesulfonic Acid for Supercapacitor (2-Naphthalenesulfonic Acid로 도핑된 혼합카본/폴리피롤을 이용한 Supercapacitor용 전극)

  • Jang, In-Young;Kang, An-Soo
    • Korean Chemical Engineering Research
    • /
    • v.43 no.3
    • /
    • pp.425-431
    • /
    • 2005
  • New type of supercapacitor using high surface area activated carbons mixed with high conductivity polypyrrole (Ppy) has been prepared in order to achieve low impedance and high energy density. Mixed carbons of BP-20 and MSP-20 were used as the active electrode material, and polypyrrole doped with 2-naphthalenesulfonic acid (2-NSA) and carbon black (Super P) as conducting agents were added to activated carbons in order to enhance good electric conductivity. Electrodes prepared with the activated electrode materials and the conducting agents were added to a solution of organic binder [P(VdF-co-HFP) / NMP]. The ratio of optimum electrode composition was 78 : 17 : 5 wt.% of (MSP20 : BP-20=1 : 1), (Super P : Ppy=10 : 7) and P(VdF-co-HFP) respectively. The performance of unit cell with addition of 7 wt% Ppy have shown specific capacitance of 28.02 F/g, DC-ESR of $1.34{\Omega}$, AC-ESR of $0.36{\Omega}$, specific energy of 19.87 Wh/kg and specific power of 9.77 kW/kg. With addition of Ppy, quick charge-discharge of unit cell was possible because of low ESR, low charge transfer resistance and quick reaction rate. And good stability up to 500 chargedischarge cycles were retained about 80% of their original capacity. It was concluded that the specific capacitance originated highly from compound phenomena of the pseudocapacitance by oxidation-reduction of polypyrrole and the nonfaradaic capacitance by adsorption-desorption of activated carbons.

Quality Characteristics of Sponge Cake added with Banana Powder (바나나 분말을 첨가한 스펀지케이크의 품질 특성)

  • Park, Jum-Soon;Lee, Young-Ju;Chun, Soon-Sil
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.39 no.10
    • /
    • pp.1509-1515
    • /
    • 2010
  • In this study, sponge cakes were prepared with substitution of 5, 10, 15, and 20% banana powder. The specific gravity and viscosity tended to increase as the ratio of banana powder increased. The foaming stability was highest at the 10% substitution level. The control group had significantly higher moisture content and volume index than the banana powder samples. The crust color values (a, b) decreased significantly with increased content of banana powder, but the a value increased. Crumb colors values (L, b) decreased as banana powder content increased while the a value increased. In terms of textural characteristics, the samples containing 5, 15, and 20% banana powder had significantly higher hardness than the 0 and 10% samples. Fracturability and resilience were maximal with 15% and 5%, respectively. Adhesiveness and chewiness were not significantly different among the samples. In the sensory evaluation, scores for banana flavor, coarseness, color, flavor, softness, and overall acceptability increased as the level of banana powder content increased. Sweetness was not significantly different among the samples. The control group had significantly higher egg-flavor as compared to the samples containing banana powder. The results indicated that substituting 10% banana powder to sponge cake is optimal for quality and provides a product with reasonably high overall acceptability.

Experimental Study on Engineering Characteristic of the Waste Landfill Soil Admixed Linear (폐기물매립지 토사계 혼합 차수재의 공학적 특성에 대한 실험적 연구)

  • Chang, Yongchai;Kim, Jinchun;Jeong, Ogki
    • Journal of the Korean GEO-environmental Society
    • /
    • v.8 no.1
    • /
    • pp.13-20
    • /
    • 2007
  • Leachates resulting from the waste landfill of waste can possibly cause the second pollution, such as the underground water and environmental pollution. Accordingly, Liner layer has been installed in the reclaimed land of waste to block and purify permeation water to and prevent this second pollution. The material used as Liner layer should have water resistance and be less than permeability coefficient of $1{\times}10^{-7}$ cm/sec. As it is very difficult to get this kind of natural clay with low permeability around the field, the suitable way to get the low permeable material is to use blend with good watertighness by mixing it with natural soil which is spread in the site. While this mixed soil, which can resist water, is commonly used in the site, namely, bentonite and MCG cementious mateiral mixed soil, which is widely used as Liner layer in the reclaimed land of waste, is recognized in Liner and durability. The study was performed to find the effect of additive of the bottom liner in the waste landfill. The aim of this paper is to explain of the field application examples as well as the data of experimental research with the engineering properties of Liner layer of the reclaimed land.

  • PDF

Characterization of Insulation Finish Material Using Inorganic Wet Treatment Fly Ash (무기성 습식 처리 플라이애시를 활용한 단열 외피 마감재의 특성 평가)

  • Ryu, Hwa-Sung;Shin, Sang-Heon;Song, Sung-Young;Kim, Deuak-Mo
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.7 no.4
    • /
    • pp.389-394
    • /
    • 2019
  • In this study, a functional inorganic insulation as TiO2 and inorganic wet fly ash were used to evaluate the physical performance and thermal environment of an exterior finish that can improve the thermal environment of a building. The performance evaluation of the finish was based on the KS F 4715 thin coating material and the thermal environment. When TiO2 was added, the physical performance was lowered at 10% or more, and the inorganic wet-treated fly ash increased the physical performance by 10%. In the thermal environmental evaluation, the surface temperature reduction effect of the inorganic wet-treated fly ash was low, but when used in combination with TiO2, it was effective to reduce the surface temperature and the internal temperature. As a result, the optimum combination of TiO2 and inorganic wet-treated fly ash for thermal environment control was found to be optimal when 5% of each mixture was used.

Material Properties of Ultra Rapid Hardening Mortar for Repairing Sewage Treatment Concrete Pipes (콘크리트 하수관거 보수용 초속경 수중불분리 모르타르의 재료적 특성)

  • Lee, Byungjae;Lee, Sunmok;Bang, Jin-wook;Kim, Yun-yong
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.24 no.3
    • /
    • pp.57-62
    • /
    • 2020
  • Among the sewage pipes installed in Korea, the length of concrete pipes exceeding 20 years is 66,334 km (42.5%). Deteriorated concrete sewer pipes need to be repaired due to the leakage of internal sewage, which causes problems such as sink holes by expanding the cavity around the pipeline. In this study, we tried to apply anti-washout underwater mortar with ultra rapid hardening cement and segregation reducing agent to sewage pipe repair. As a result of the setting time test, the final set time was delayed by up to 172% by incorporating segregation reducing agent. In the test for measuring the degree of mortar segregation in water, it was measured at pH 12 or less under all mixing conditions. In addition, the suspension amount was measured to be 50 mg / l or less to satisfy the KCI-AD102 standard by incorporating a segregation reducing agent. In terms of the average value of mortar compressive strength, by incorporating segregation reducing agent, the strength of the specimens produced in air was more than 80% of that of the specimens produced in water. Conversely, the bond strengths of the specimens produced in water were measured to be higher than those of the specimens produced in air. Water resistance was evaluated by measuring water absorption and water permeability. Water absorption and water permeability were reduced by 42.6% and 36.6%, respectively, by mixing segregation reducing agent.

Characteristics of Doenjang made from Different Material and Ratio of Koji (고오지의 종류와 배합을 달리한 된장의 특성)

  • 최경숙;이혜수
    • Korean journal of food and cookery science
    • /
    • v.10 no.1
    • /
    • pp.39-44
    • /
    • 1994
  • For the purpose of supplying the basic knowledge to make Doenjang which is acceptable to Korean people three kinds of koji, namely rice, wheat, and soybean Koji were made with Aspegillus oryzae. Then Doenjangs were made with four different ratio of three Kinds of Koji. Components related to the taste of Boenjang were analyzed, sensory evaluation of Doenjang were made, and correlation between analytical variables and sensory parameters were investigated. The results were as followed 1. Total nitrogen contents of each Doenjang were increased with increasing the ratio of Koji except Doenjang made with soybean Koji. The amounts of amino nitrogen increased with the ratio of koji increases in each Doenjang. Amino nitrogen contents of Doenjang made with soybean Koji were highe. than the others, 2. Reducing sugar contents of rice and wheat Doenjang were similar, but amounts were increased with increasing the ratio of Koji Reducing sugar contents of Soybean Doenjang were lower than the others. pH of the Doenjangs decreased as the ratio of the koji increased. The amount of sweet taste amino acids and MSf; like amino acids were increased, but bitter taste amino acids were decreased as the ratio of the koji increased in rice and wheat Doeujang, The sweet taste amino acids and bitter taste amino acids in soybean Doenjang showed little Changes in amount, but the amount of MSG like amino acids increased as the ratio of the Koji increased from 13% to 25%, 37%, and 50%. The nucleotide contents of wheat Doenjang were higher than other Doenjangs, and there is a tendency to increase the amounts of nucleotide as increasing the ratio of koji in each Doenjang. 3. As a result of sensory evaluation, wheat Doenjang of 13% koji ranked highest in the overall eating quality, and Doenjangs made with 50% and 37% of rice koji ranked next, 4. pH and sweet tast amino acids influenced on the Overall eating quality of the Doenjang, however most compo-nents of the Doenjang seemed to relate to overall eating quality of Doenjang, however most components of the Doenjang seemed to relate to overall eating quality of Doenjang.

  • PDF

Preparation of Instant Powdered Soup Using Oyster Wash Water and Its Characteristics (굴 세척액을 이용한 인스턴트 분말 수프의 제조 및 특성)

  • Kim, Jin-Soo;Heu, Min-Soo
    • Korean Journal of Food Science and Technology
    • /
    • v.33 no.5
    • /
    • pp.534-539
    • /
    • 2001
  • To utilize oyster cannery processing waste water effectively, this study was carried out to prepare instant powdered soup using oyster wash water. Instant powdered soup from oyster hot-water extracts (HWE) was prepared by mixing oyster spray-dried hot-water extracts (15 g) with table salt (5 g), cream powder (19 g), milk replacer (12 g), wheat flour (20 g), corn flour (15 g), starch (5 g), glucose (7.5 g) and onion powder (1.5 g). In preparing instant powdered soup from oyster wash water (OWW), powder from oyster spray-dried wash water instead of the spray-dried hot water extracts, was added and other additives were added in proportion to those in the HWE. The OWW consists mainly of carbohydrates (71.1%). It was not different from the instant powdered soup from hot-water extracts. The volatile basic nitrogen, vaible cell counts, coliform group of instant powdered soup from oyster wash water contains 29.4 mg/100g, $4.6{\times}10^4\;CFU/g$, <18 MPN/100g, respectively and its water activity has 0.246. So it was a hygienically safe and conservable instant food. The main fatty acid of OWW was 16 : 0 and 18 : 1n-9. Its chemical score of protein was 59.4% and its main inorganic matter was iron. According to a sensory evaluation, in contrast to the HWE, the OWW had a slightly lower aroma but better taste. It was concluded from the above chemical and sensual evaluation that the oyster wash water can be used as a flavor enhancer for instant powdered soup.

  • PDF

Evaluation of the applicability of Cockle shell and walnut shell in a bioretention facility (Bioretention 내 꼬막 및 호두껍질의 적용성 평가)

  • Jeon, Minsu;Geronimo, F.K.F.;Choi, Hyeseon;Kim, Lee-hyung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2019.05a
    • /
    • pp.203-203
    • /
    • 2019
  • 도시화로 인한 불투수면의 증가는 물순환 왜곡, 비점오염원 발생 및 수생태계 건상성 훼손 등을 야기시키며, 이를 해결하기 위하여 다양한 LID 기법을 적용하고 있다. 일반적으로 LID 내 적용 되는 여재들은 무기성여재로 중량이 크고 미세공극의 부재로 물리화학적 및 생물학적 저감기능이 제한적이다. 따라서 본 연구에서는 중량성이 낮은 생물폐자원을 선정하여 LID 시설 적용성평가를 수행하고자 한다. 생물폐자원은 발생량, 경량성 및 용이성을 고려하여 꼬막껍질(CS)과 호두껍질(WS)을 선정하였다. 생물폐자원의 산화부식을 고려하여 무기성 여재인 화산석과 혼합하여 Bioretention 시설에 적용하였으며, 여재 혼합비율에 따라 총 3가지의 Case 로 구성하였다. 식생은 구절초와 꽃댕강나무를 식재하였으며, 여재의 물리적 특성 분석을 위하여 적용 전과 후의 SEM(Scanning Electronic Microscope)을 수행하였다. 모니터링은 도로퇴적물 100g과 물 110L를 제조하여 인공강우유출수를 이용하여 수행하였으며, $0.0003{\sim}0.007m^3/sec$의 유속으로 주입하였다. 시설의 유입 및 유출부에서 유량 측정 및 수질 시료를 채취하였으며, 채취된 시료는 수질오염공정 시험법에 준하여 입자상 물질, 유기물, 영양물질 및 중금속 등을 분석하였다. Bioretention 시설의 모니터링 결과를 이용하여 물수지 및 TSS 저감 효율을 산정하였으며. 물수지 분석결과 시설의 저류율은 Case 1(soil) > Case 3(WS+RV) > Case 2(CS+RV) 순으로 나타났다. 시설 내 공극률이 가장 낮았던 Case 1에서 저류율이 약 55%로 가장 높게 것으로 분석되었다. Case 3(WS+RV)은 Case 2(WS+RV)와 시설 내 공극률이 유사함에도 불구하고 저류율이 약 10% 높은 것으로 분석되었다. 오염물질 저감효율 분석 결과, TSS와 TP의 제거효율은 모든 Case에서 약 75% 이상으로 높게 나타났으며, COD의 경우 모래를 적용한 Case 1에 비해 생물폐자원인 꼬막껍질과 호두껍질을 적용한 Case에서 약 1.3배 이상 높게 나타났다. 호두껍질과 꼬막껍질의 SEM 분석 결과 표면에 다공성이 형성되어 있는 것으로 조사되었다. 이는 여과 및 저류기작으로 인한 물순환 효과증대와 다공성과 돌기사이로 인한 입자상의 물질 여과 및 흡착으로 인하여 오염물질의 제거효율이 증대 된 것으로 평가된다. LID시설 내 생물폐자원과 무기성여재를 적절히 배합하여 복합여재로 조성할 경우 침하현상을 방지할 뿐만 아니라 저류 및 침투기능 향상과 미생물의 서식환경을 제공하기에 물순환 회복 및 비점오염물질 저감에 기여할 것으로 평가된다.

  • PDF

Preparation and Characterization of Elastomeric Conductor based on Magnetite and Chloroprene Rubber ($Fe_3O_4$와 Chloroprene Rubber (CR)를 기초로한 탄성 전도체의 제조 및 특성연구)

  • Choi, Kyo-Chang;Lee, Eun-Kyoung;Choi, Seo-Young
    • Elastomers and Composites
    • /
    • v.38 no.1
    • /
    • pp.81-87
    • /
    • 2003
  • In this work, $Fe_3O_4$ (magnetite), conductive filler was prepared from $FeCl_2{\cdot}4H_2O,\;(CH_2)_6N_4$ (hexamethylene tetramine), and $NaNO_2$, followed by mixing with crystallizable chloroprene rubber(CR). The influence of conductive filler content on the properties of the conductive composite was studied and temperature dependence of the electrical conductivity (${\sigma}$) was also investigated. It is found that the percolation threshold concept holds true for the conductive particle-filled composite where ${\sigma}$ indicates a nearly sharp increase when the fraction of magnetite in the mixture exceeds 27%. The temperature dependence of ${\sigma}$ is thermally activated blelow or at the $P_c$. Magnetite acts as reinforcement and conductive filler for CR rubber. Moreover, it is shown that the composite with magnetite of 50 phr gives the most significant mechanical properties for tensile strength and elongation at break, which is due to the formation of optimum physical interlock and crosslinking. The results of 100%, 200%, and 300% moduli suggest that the moduli are related with reinforcement effect of magnetite and viscosity of the blend.

Study on the Lowering of NaCl Content by Co-composting Food Wastes (저농도 식염을 함유하는 음식물쓰레기 퇴비제조)

  • Lee, In-Bog;Park, Chang-Kyu;Kim, Pil-Joo
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.34 no.1
    • /
    • pp.17-25
    • /
    • 2001
  • High salt content in food waste limit use as the potential source of compost. Since sodium chloride content should be lower than one percent to meet requirement for agricultural use of compost, we attempted use of three kinds of co-composting material for food wastes compost, which were fermented, dried, and fresh types of amendments which included pig manure, sawdust and puffed rice hull. Food wastes were composted well and stabilized after around the 40th days of composting. Little difference were found between composts amended sawdust and puffed rice hull. The result indicated that puffed rice hull could be used as a good alternative of sawdust. Because sawdust or puffed rice hull were mixed as amendments to control water contents and to dilute high NaCl content of compost material, the C/N ratios of the final products were significantly high over 40. However, NaCl contents of final products were dropped to less than percent on the fresh weight basis by mixing food wastes and the above amendments with the optimum rates.

  • PDF