• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.456-463
• /
• 2022

The SAM(Surface-to-Air Missile) systems will be operated until disposing of it after production, the necessary test and evaluation should be performed during the development stage to ensure the operational performance after deployment. As development of technologies related to the electromagnetic wave field of missile system is required, so the verification of the electromagnetic environment has become more important. Therefore it is necessary to carefully review whether there are any weaknesses through the analysis of the SAM system when establishing the test and evaluation procedure. This paper describes the general electromagnetic test procedure for SAM system and discusses the matters that need to be supplemented. Also, methods for supplementation and review results were written.

• Journal of Aerospace System Engineering
• /
• v.18 no.3
• /
• pp.1-7
• /
• 2024

The utilization of Unmanned Aerial Vehicles (UAVs) is expanding in various industries such as logistics, manufacturing, and transportation. However, to operate a large number of UAVs, it is imperative to first plan a secure and efficient self-configuring communication network for UAVs. In this study, we proposed a method for planning a secure and efficient UAV self-configuring communication network using Voronoi diagrams in the following three steps: 1) generating Voronoi diagrams using obstacles, 2) selecting obstacles to consider for path generation, and 3) planning the optimal path and outputting the path. The real-time feasibility of using the proposed method for planning optimal communication paths for a realistic number of UAVs was experimentally validated.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.7
• /
• pp.411-421
• /
• 2010

A time-reversal mirror (TRM) is useful in diverse areas, such as reverberation ing, target echo enhancement and underwater communication. In underwater communication, the bit error rate has been improved significantly due to the increased signal-to-noise ratio by spatio-temporal focusing. This paper deals with two issues. First, the optimal number of array elements for a given environment was investigated based on the exploitation of spatial diversity. Second, an algorithm was developed to determine the optimal location of the given number of array elements. The formulation is based on a genetic algorithm maximizing the contrast between the foci and area of interest as an objective function. In addition, the developed algorithm was applied to the matched field processing with ocean experimental data for verification. The sea-going data and simulation showed almost 3 dB improvement in the output power at the foci when the array elements were optimally distributed.

• Journal of Navigation and Port Research
• /
• v.48 no.1
• /
• pp.1-6
• /
• 2024

Aid-to-Navigation facility is important for maritime traffic safety. In Korea, for safe maritime traffic, the Ministry of Oceans and Fisheries is using an Aid-to-Navigation management system. The current Aid-to-Navigation management system displays information based on text, making it difficult to determine the impact if Aid-to-Navigation fails or an accident occurs. A simulator can be used to verify the placement of Aid-to-Navigation. However, real-time information is not applied and maintenance of the simulator is expensive. Additionally, the Aid-to-Navigation simulator cannot simulate effects of port backlighting. To improve these issues, we proposed an Aid-to-Navigation management platform based on digital twin technology. This system can predict failures by analyzing real-time sensor data collected from navigation signs. We plan to develop a function that can simulate Aid-to-Navigation placement. Aid-to-Navigation is expected to be managed efficiently by applying digital twin technology.

• Journal of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.667-675
• /
• 2012

Flat plate are being used more in buildings requiring a high level of technical installations or in buildings needing changeable room arrangements during their life time such as office buildings. The main problem in flat plate is its weak resistance against a punching failure at its slab-column connections. Therefore, in this research, an experimental study on full-scale interior slab-column connection was performed. Three types of shear reinforcements were tested to prevent brittle punching shear failure that could lead to collapse of the structure. A series of four flat plate specimens including a specimen without shear reinforcement and three specimens with shear reinforcements were tested. The slabs were tested up to failure using monotonic vertical shear loading. The presences of the shear reinforcements substantially increased punching shear capacity and ductility of the interior slabcolumn connections. The test results showed that a slab that did not have enough bond length failed before shear reinforcement yielded due to anchorage slip. Also, FEM analyses were performed to study an effect of slab thickness and concrete compressive strength on the flat plate slab. The analytical study results were used to propose a method to calculate performance capacity of shear reinforcement in slab-column connection.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.1_2
• /
• pp.27-40
• /
• 2004

The OSGi service platform has several characteristics as in the followings. First, the service is deployed in the form of self-installable component called service bundle. Second, the service is dynamic according to its life-cycle and has interactions with other services. Third, the system resources of a home gateway are restricted. Due to these characteristics of a home gateway, there are a lot of rooms for malicious services can be Installed, and further, the nature of service can be changed. It is possible for those service bundles to influence badly on service gateways and users. However, there is no service bundle authentication mechanism considering those characteristics for the home gateway In this paper, we propose a service bundle authentication mechanism considering those characteristics for the home gateway environment. We design the mechanism for sharing a key which transports a service bundle safely in bootstrapping step that recognize and initialize equipments. And we propose the service bundle authentication mechanism based on MAC that use a shared secret created in bootstrapping step. Also we verify the safety of key sharing mechanism and service bundle authentication mechanism using a BAN Logic. This service bundle authentication mechanism Is more efficient than PKI-based service bundle authentication mechanism or RSH protocol in the service platform which has restricted resources such as storage spaces and operations.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.1-9
• /
• 2020

The purpose of this study is to verify the effects of ventilation corridor and derive adequate policy alternatives to its application for the city of Sejong, which is located in an inland of Korean Peninsula. In order to introduce the ventilation corridor in the city, it is necessary both to understand change on fresh air flow affected by the construction of new cities and to show its effects which are able to circulate air flow of the city. The study identified ventilation effects using computational fluid dynamics models. In particular, it analyzed change on wind speed and direction after constructing of a new town and cool air flow along the lowlands generated after sunset. In addition, it identified those of reducing particulate matter when arranging buildings conforming to the ventilation corridor at block level. The policy implications derived from simulation can be summarized as follows. First, it is desirable to plan ventilation corridors so that fresh air from mountains, forests, and valleys can flow into cities and mitigate the concentration of particulate matter. Furthermore, public facilities covering parks, plazas, and playgrounds should be installed preferentially to attract safe outdoor activities near to areas with low levels of particulate matter. Finally, it is adequate to prepare for a number of alternative plans by analyzing ventilation corridors when setting out district unit plan.

• Journal of Distribution Science
• /
• v.10 no.5
• /
• pp.29-36
• /
• 2012

This paper aims to establish a Fengshui-based marketing model that companies engaged in selling dwelling spaces can utilize to increase their sales. The study is based on an investigation of appraisal statements and analysis techniques used in Fengshui. The Fengshui marketing model can be used for corporate advertising, sales promotions, public relations events, and for framing an overall marketing strategy according to changing consumer demand. As a sales promotion strategy, it can be used to influence consumer psychology and behavior. Although this study is limited to the all-pervasive advertising and marketing of houses by construction companies under installment plans, the Fengshui marketing method can also be used for the sale of store locations, space for product display, and so on. Initially, I analyze living spaces according to traditional Fengshui theory, and subsequently apply the modern method to study topographical space structures and geomagnetism disturbances. I present a standard form for writing the Fengshui appraisal statement based on the objective analytical method of Fengshui. With its shortcomings remedied, the appraisal statement can lead to high-quality advertising and increased valuations because it is based on objective data analysis and systematic evaluation of houses. In brief, I have designed the Fengshui marketing model as a sales promotion technique for the housing industry. I believe this study will contribute to the application of Fengshui in the housing industry's sales promotion efforts through high-quality advertising. Future research should evaluate Fengshui marketing in the housing industry based on case studies. Research questions to be addressed could include how Fengshui marketing has affected installment sales of houses and how Fengshui architectural practices affect general well-being. These studies would help propagate Fengshui marketing by validating its effectiveness. In addition, case studies should be undertaken to consider the practical applications of Fengshui marketing, how it can contribute to maximizing a company's image and profits, and how it can promote customer satisfaction.

• Journal of the Korea Concrete Institute
• /
• v.29 no.3
• /
• pp.259-266
• /
• 2017

The purpose of this study was to contribute to the field application cost effectively and reasonably by developing the functional piles that reinforces shear force. CFP pile (Concrete Filled Pretensioned Spun High Strength Concrete Pile with Ring type Composite shear connectors) developed in this study increases the shear stress by placing composite shear connector and filling the concrete into hollow part of the pile. By placing the reinforcement (H13-8ea) and the reinforcement (H19-8ea) into hollow section inside of PHC piles, it also improves the shear strength due to increasing steel ratio. It reinforces shear strength effectively by dowel force that is generated by putting reinforcement (H13-8) into the holes of composite shear connectors for the composite behavior of filled concrete and PHC pile. The study was reviewed and compared the calculated result of the shear strength by limit state design method highway bridge design standards (2012) and experiment result of the shear strength by KS F 4306. We can design the shear strength reasonably as the safety ratio of 2.20, 2.15, 2.05 is shown comparing to design shear strength, according to design shear strength on each cross sections and the experiment results of the CFP pile.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.448-453
• /
• 2017

The purpose of this study was to compare the marginal discrepancy of coping crowns according to manufacturing method and materials by using the CAD/CAM system to compare the optimum manufacturing method and materials. The coping crowns were fabricated by using manufacturing methods and materials, and marginal fit was measured using the replica technique. For comparative analysis of manufacturing methods and materials, analysis of variance was performed. One-way ANOVA was performed to compare and analyze different mean values. For the milling method of the alloy, 114.6 was obtained for the MM group, 111.4 for the MS group, 67.2 for the MSC group, and 50.9 for the MSS group, respectively, using the milling/sintering method. In the milling/sintering method of ceramic, 35.6 and 36.3, respectively, were obtained for the SLME group and SLMR group, respectively. However,there was a significant difference according to the material. The milling/sintering method of the ceramic material gave the lowest value, and it was verified by the optimal method. However, marginal discrepancy of coping crowns fabricated using the CAD/CAM system is applicable to the clinic since it corresponds to acceptable numerical values in clinical practice.