• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8C
• /
• pp.745-757
• /
• 2007

In this paper, we propose a design of GPS anti-jamming system and its operational method, which can effectively suppress interference and jamming signals induced in GPS receiver. The 7-array antenna used in the proposed system is composed of conventional 6 equi-spaced circular elements with one element on the center of antenna and can be efficiently operated under power-constrained conditions. Futhermore, in this paper, we analyze the structure and complexity of STAP and SFAP which are well known techniques in adaptive array antenna signal processing, and we compare the BER performances between STAP and SFAP in various jamming environment based on the same complexity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.661-668
• /
• 2011

Direction estimation of signal of interest has been an important issue in radar and communication system. Generally, DOA(Direction Of Arrival) methods have been researched in the field of signal processing with ideal array sensors. However, there are some problems in array antennas such as the input signal distortions in amplitude and phase, due to the mutual coupling between array elements. In this paper, we propose a new method of DOA estimation in the dipole array antenna by using the method of moment(MoM) to compensate the mutual coupling effects between array antenna elements. Also, the proposed method is applied to the estimation of azimuth(${\phi}$ ) and elevation(${\theta}$) angles using uniformly linear dipole array under noisy environments.

• The Magazine of the IEIE
• /
• v.38 no.1
• /
• pp.44-49
• /
• 2011

다중채널 압축센싱(multi-channel compressive sensing) 문제는 0이 아닌 성분이 공통된 위치에 분포하는 벡터들을 복원하는 방법을 다루는 문제이며 레이다의 도착방향 추정 문제, 역산란 문제, 산란광 단층촬영과 같은 많은 실용적인 문제에 응용될 수 있다. 압축 센싱 문제는 성긴(sparse) 속성을 갖는 벡터를 상당히 높은 확률로 복원시킬 수 있음이 밝혀져 있다. 이로 인해 기존의 압축 센싱 방법이 다중채널 압축센싱에서도 많이 활용되어 왔으며, 측정 벡터의 개수가 적을 때에도 높은 확률로 입력 신호를 복원할 수 있다. 그러나, 측정 벡터의 개수가 많아질수록, 기존의 압축센싱 알고리즘을 이용했을 때의 성능은 복수신호분리 (MUSIC) 알고리즘과 같이 배열신호처리(array signal processing)에서 활용되는 방법을 적용했을 때보다 더 나쁜 특성을 보인다. 이러한 기존 방법의 문제점으로 인해 우리는 새로운 다중채널 압축센싱 알고리즘을 제시하고자 하며, 이는 기존의 압축센싱 이론과 배열 신호처리 알고리즘을 개별적으로 적용할 때 가지는 한계를 극복할 수 있게 해준다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.151-154
• /
• 1998

이 논문에서 비선형 배열 MUSIC 빔형성 기법을 이용하여 예인형 선배열 센서 시스템의 표적 좌우 방위 분리 방법을 기술하였다. 이 기법은 배열 운동모델 Water-Pully 모델과 방향센서의 정보를 이용하는 칼만필터를 설계하여 예인함 기동에 따른 배열형상을 추정하고 표적의 좌우방위를 분리하기 위하여 추정된 배열형상에서 MUSIC 빔형성 기법으로 신호처리를 수행하였다. 또한 예인주기와 예인진폭과 같은 예인함 기동형태의 전형적인 빔형성 기법과 MUSIC 빔형성 기법으로 표적의 좌우 방위 분리 성능을 비교 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2600-2602
• /
• 2004

열상장비는 물체가 방출하는 적외선 영역의 미약한 에너지를 검출하여 눈에 보이는 영상으로 변환하는 장비이다. 주간과 동일한 영상을 야간에도 획득할 수 있기 때문에 야간 감시등 군사용 장비로 활용되지만 최근에는 송전선로의 이상 유무 판단, 저장 탱크의 저장량 확인, 사스 환자의 체열 검색 등 산업계와 의료계의 이용도 증가하고 있다. 본 논문에서는 최신 기술인 주사방식 초점면 배열 열상장비의 아날로그 및 디지털신호처리기 설계와 제작 기술을 다룬다. $480{\times}6$ 배열의 고밀도 검출 소자를 이용하여 고속, 저잡음 신호처리를 함으로써 안정된 열 영상을 실시간으로 획득하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.40-51
• /
• 2015

This study analysis traffic phase order alternatives to maximize throughput. According to theoretical analysis alternative2(EW: left turn after through, NS: through after left turn) and alternative5(EW: through after left turn, NS: left turn after through) can minimize the maximum delay. Both alternatives split the phase that have the same destination link under the whole cycle length. This shows that phase order alternative can effect to the fully saturated intersection. In side of simulation analysis by microscopic traffic simulator PTV VISSIM F 7.0, each phase order alternatives can't effect throughput under the non saturated condition. However under the saturated condition, the average controlled delay of the intersection has been changed by phase order alternatives. The simulation analysis shows that alternative2 and alternative5 increase throughput 3.8% to 5.1% under the saturated condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1188-1195
• /
• 2012

The trend for the development of radar is the active phased-array radar system. The trade-off between the processing speed and the number of the signal process board for the real time signal processing has to be optimized particularly in multichannel radar system. This paper introduces a transmission technique in order to transmit a large amount of received data from an Antenna Part to Signal Process Part. As a result, the number of the S/L board(COTS board) is reduced to one half, and the margin of the data transmission rate is about 2 times higher than the original method.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.703-709
• /
• 2021

As drone technology advances, the risks of drones are increasing, then technology to detect drones is becoming important. In this thesis, it was verified that miniaturized and lightweighted active array antenna could be used for radar system to detect drones in reality. The transmit-receive module was designed in the form of tile-type to simplify interconnections between devices. The waveform generation module and the down conversion module were miniaturized to include in one body too. As a result of verifing the detection performance through test, it was confirmed that the detection range was over 3.7Km.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.299-306
• /
• 2015

A conventional phased array system can control an ultrasonic beam electronically by adjusting the excitation time delay of individual elements in a multi-element probe and produce an ultrasonic image. In Contrast, full matrix capture (FMC) is a data acquisition process that allows receiving ultrasonic signals from one single shot of the phased array transducer element through all the other elements and captures the complete dataset from every possible transmit-receive combination. This FMC data can be used to create the ultrasonic image in post processing. It is possible to produce not only images equivalent to conventional phased array image but also total focusing method (TFM) images with improved resolution and sharpness, which is virtually focused at any point in a region of interest. In this paper, the system that can perform FMC by using a conventional phased array instrument is developed, and a study was conducted on the imaging algorithms to reconstruct sector B-scan and TFM images from FMC dataset.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.2
• /
• pp.27-31
• /
• 2000

Thermal imaging system is implemented for the measurement and the analysis of the thermal distribution of the target objects. The main Part of the system is thermal camera in which a focal plane array typed sensor is introduced The sensor detects mid-range infrared spectrum or target objects and then it output generic video signal which should be processed to form a thermal image frame. A digital signal processor(DSP) in the system inputs analog to digital converted data. performs algorithms to improve the thermal images and then outputs the corrected frame data to frame buffers for NTSC encoding and for digital outputs.. To enhance the quality of the thermal images, two point correction method is applied. Figures indicate that the corrected thermal images are much improved.