• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.4
• /
• pp.185-192
• /
• 2017

In various fields of science, 2-dimensional array data is being generated actively as a result of measurements and simulations. Although various query processing techniques for array data are being studied, the problem of finding similar regions, whose sizes are not known in advance, in 2-dimensional array has not been addressed yet. Therefore, in this paper, we propose an efficient method for finding regions with similar element values, whose size is larger than a user-specified value, for a given 2-dimensional array data. The proposed method, for each pair of elements in the array, expands the corresponding two regions, whose initial size is 1, along the right and down direction in stages, keeping the shape of the two regions the same. If the difference between the elements values in the two regions becomes larger than a user-specified value, the proposed method stops the expansion. Consequently, the proposed method can find similar regions efficiently by accessing only those parts that are likely to be similar regions. Through theoretical analysis and various experiments, we show that the proposed method can find similar regions very efficiently.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1
• /
• pp.71-80
• /
• 1996

Characteristics of sleeve-gun arrays installed on the R/V Onnuri were analyzed and compared with survey data. In the case of cluster array, the beam width in the frequency range up to 814Hz is constant as $179.5^{\circ}$, and rapidly narrows in the frequency range of 814-1631Hz. However, in the case of long and wide arrays, as the frequency increases, the beamwidth decreases. The optimal frequency is 69Hz. the main lobe of vertical inclination has its maximum amplitude at phase angle $0^{\circ}$. The optimal frequency of cluster array which produces little side lobe is less than 1631Hz, and those of long and wide arrays are less than 108Hz. As a result, the cluster array produces a good source for high-resolution seismic survey, while the long and wide arrays are suitable for the survey of deep structures. The final high-resolution seismic section with cluster array was compared with that of long and wide arrays.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1005-1014
• /
• 2007

In this paper, The four types SRA(Sequential Rotated Array) antennas has been analyzed. Those are consisted of a 4-elements SRA, a 8-elements SRA, the $2{\times}2$ planer array SRA and the triple (4+8+4)-elements SRA. These LHCP SRA antennas are used a probe feeding multi-layer truncated microstrip antenna whose center frequency is 11.85 CHz. The cooperated feeding circuits are designed for feeding to each elements with equal amplitude and regular phase. Comparing with the each simulation results and experiment results of this 4-type SRA antennas, the triple (4+8+4)-elements SRA showed the most electrical characteristics in the degree of integration, high gain and low cross polarization.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.391-399
• /
• 2021

The conformal array sensor has different sub-array depending on different beam steering directions. According to the method to effective the sensor, the performance of the conformal array sensor can be different, where the sub-array selects an effective sensor. Also, due to the figure of the conformal array sensor, the figure of the sub-array can be different each other, which results in different performance on directivity index, beam width and etc. In this paper, two methods to select sub-array which is the criteria for each sensors position vector and directive vector were proposed. For two sub-array selection methods, the performance of the directivity index, horizontal and vertical beam width were compared with the average and variance. In addition, this comparison was conducted when the number of sensors was fixed. When the number of sensors was not fixed, the directional vector method mainly results in high performance, but the performance of vertical beam width was lower or equal. When the number of sensors was fixed, the performance of two methods is similar, but the performance of variance was deteriorated.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.250-256
• /
• 2002

Resistivity tomography has become an important tool to image underground resistivity distribution. This method has been widely applied to site investigation for engineering and environmental purpose. In resistivity tomography, various electrode arrays can be used and each array has both merits and demerits. For example, the pole-pole array has high signal to noise ratio (S/N ratio), but its resolution is too low. The dipole-dipole array has low S/N ratio, but its resolution is very high. The Pole-dipole may has intermediate Snf ratio and resolution. The modified Pole-dipole array, recently proposed, shows reasonable S/N ratio and resolution, which are comparable to the pole-dipole array. These electrode arrays except the pole-pole array, however, have the problem that the apparent resistivity can diverge at some special electrode Positions. Also, the Pole-Pole array may not reflect the doe resistivity of an anomalous body. In this study, we propose a new electrode array, mixed array, where pole-dipole and modified pole-dipole ways are selectively used with the relative positions of current and potential electrodes. The mixed array has the same level of S/N ratio and resolution as the pole-dipole array and the apparent resistivity does not diverge in the receiver hole. Furthermore, the apparent resistivity using the array can reflect the true resistivity of the anomalous body.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.3 s.3
• /
• pp.75-80
• /
• 2000

In scheduling multi-unit projects, several alternatives can exist in network construction due to repetitiveness of their activities. Project duration is affected not only by the duration of each activity but also by the arrangement of repeating activities in such projects. This paper provides a network compression method that assigns predecessors to each activity to minimize its float time. Different to the previous efforts that utilized line of balance as the base scheduling-model, this research adopts precedence diagram arranged in two coordinates, the space axis and the resource one. This method seeks the most appropriate predecessors for each activity in each direction of the two coordinates for the purpose of minimizing the idle resource and space. This activity arrangement method was applied to a multi-unit apartment-construction project, to prove its capability of network compression. The result shows that the method successfully sought room for saving construction duration by changing the activity arrangement. The network compression method presented in this research can be utilized in multi-unit construction projects such as apartment complex projects.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.322-322
• /
• 2011

White gold는 아름다운 광택과 손쉬운 가공성의 장점 때문에 장신구를 비롯한 다양한 분야에서 그 활용 가치가 매우 높다. 본 연구에서 우리는 열처리를 통한 white gold의 hardness강화 및 품질향상을 위하여 다양한 열처리 조건별 기계적 특성변화를 비교 관찰 하였다. 열처리 전 white gold alloy의 구성성분을 조사하기 위하여 EPMA와 ICP-MS를 사용하여 분석 후 그 값을 수치화 하였다. 14K, 18K White gold alloy 총 32개의 시료를 사용하여 $750^{\circ}C$, 30 min의 조건에서 solid treatment 및 quenching 후 $200^{\circ}C{\sim}350^{\circ}C$ 온도 범위에서 $50^{\circ}C$ 간격으로 age-hardening을 실시하였다. 열처리 전과 후 각 조건별 hardness 변화는 Vicker's hardness tester를 사용하여 측정하였다. 또한 age-hardening 후 모든 시료는 optical microscope (OM)을 사용하여 각 열처리 조건 별 grain 들의 배열 및 size의 변화를 관찰하였다. 열처리 전 14K, 18K white gold alloy의 hardness의 평균값은 각각 162 Hv와 196 Hv를 나타내었다. solid treatment 후 그 수치가 146 Hv, 172 Hv로 감소하였고, age-hardening 후에는 hardness 값이 점차 증가하여 14K는 $260^{\circ}C$에서 226 Hv, 18K는 $270^{\circ}C$에서 268 Hv의 가장 높은 수치를 나타내었다. 또한 14K 및 18K는 각각 $260^{\circ}C$, $270^{\circ}C$ 이상에서는 over-aging 현상을 나타내었다. OM 분석 결과 열처리 전 불균일했던 grain들의 배열이 solid treatment 및 quenching 후 다소 균일해짐을 확인할 수 있었고, grain size 또한 열처리 전에 비해 증가함을 알 수 있었다. Solid treatment 후 모든 시료의 hardness값이 전반적으로 감소하였다가 age-hardening을 통해 grain들의 배열이 점차 안정화 되면서 hardness가 증가 하였고, over-aging 구간에서는 급격히 감소하는 경향을 나타내었다. 이 결과들로부터 우리는 14K, 18K white gold alloy 에 대한 age-hardening 최적조건을 도출하였고, 각 열처리 조건별 grain 배열 상태의 변화를 관찰 할 수 있었다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1207-1212
• /
• 2018

The signal intelligence (SIGINT) technology is actively used for collecting various data, in a number of fields, including a military industry. In order to collect the signal information and data and to transmit/receive the collected data efficiently, the accurate angle-of-arrival (AOA) information is required and communication disturbance from the interference or jamming signal should be minimized. In this paper, we present the structure of an adaptive beam-forming satellite system based on the planar array antenna, for collecting and transmitting/receiving the signal information and data efficiently. The presented adaptive beam-forming system consists of an antenna in the form of a planar array, an AOA estimator based on the Multiple Signal Classification (MUSIC) algorithm, an adaptive Minimum Variance Distortionless Response (MVDR) interference canceler, a signal processing and D/B unit, and a transmission beamformer based on Minimum mean Square Error (MMSE). In addition, through the computer simulation, we evaluate and analyze the performance of the proposed system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.440-448
• /
• 2019

In this paper, we propose an ordering chatbot that can process multiple keywords based on recursive slot-filling method. In general, in case of an order service using chatbots, the whole order process is performed only according to the sequence defined by the developer. That is, among all the information needed for the whole order process, only one input can be processed at one time. In order to reduce processing step for the order, we propose a recursive slot-filling method which fills out multiple slots per one time by extracting multiple keywords. First, a keyword array for the order is created according to the order related information. Next, from the input sentence of a user, multiple keywords is extracted. Corresponding slots for a keyword array will be filled with the extracted keywords. Finally, recursive routine will be executed to fill out all the blank in the keyword array. The usability and validity of the proposed method will be shown from the implementation of a smartphone application.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.3
• /
• pp.27-34
• /
• 1999

This paper proposes an algorithm to design the non-linear array so as to form efficiently the one-shot beam with relatively less sensors for acoustic measurement. In this algorithm, according to the spatial sampling theory the part for high frequency(HF) band has equispaced sensor array and the sensor distances below the HF band are decided as a function of number of HF sensors. As the results of the simulations, the mean and variances of directivity index(DI) of non-linear array which has less sensors are similar to those of linear array. and the DI variation for beam steering angle is very small. And the beam width at -2dB point is 6.8°. Thus it is confirmed that the design algorithm for non-linear array which is proposed to have less sensors can be efficiently used in acoustic measurement.