• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.64-64
• /
• 2003

고집적화된 시스템 LSI 반도체 소자 제조 공정에서 소자의 고속화 및 고성능화에 따른 배선층수의 증가와 배선 패턴 미세화에 대한 요구가 갈수록 높아져, 광역평탄화가 가능한 STI CMP(Shallow Trench Isolation Chemical-Mechanical-Polishing)공정의 중요성이 더해가고 있다. 이러한 STI CMP 공정에서 세리아 슬러리에 첨가되는 계면활성제의 농도에 따라 산화막과 질화막 사이의 연마 선택비를 제어하는 것이 필수적 과제로 등장하고 있다. 일반적인 CMP 공정에서 압력 증가에 따른 연마 제거량이 Prestonian 거동을 나타내는 반면, 연마 입자의 크기를 변화시켜 계면활성제의 농도를 달리 하였을 경우, 압력 변화에 따라 Non-Prestonian 거동이 나타나는 것을 고찰할 수 있었다. 따라서 본 연구에서는 세리아 슬러리 내에 첨가되는 계면활성 제의 농도와 연마입자의 크기를 달리한 후, 압력을 변화시킴으로 나타나는 non-Prestonian 거동에 미치는 영향에 대하여 연구하였다.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.882-885
• /
• 2018

Recently, signal integrity on PCB (printed circuit board) becomes very important as the system operation speed increases. So far, PCB is customarily designed to minimize area and cost. However, ultra-high-speed PCB often fail to operate properly, unless it is precisely and carefully designed considering dielectric characteristics, line width, line spacing, and impedance matching. This paper surveys many problems in ultra-high-speed PCB and various design methods to mitigate them.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.78-84
• /
• 2004

Low voltage circuit breakers which interrupt rapidly and raise the reliability of power supply are widely used in power distribution systems. In the paper, it has been investigated how much interrupting capability is improved by correcting the shape of the contact system in molded case circuit breaker(below MCCB), especially contacts and arc runner. Prior to the interrupting testing, it is necessary for the optimum design tc analyze electromagnetic forces on the contact system generated by current and flux density. This paper presents both our computational analysis and test results on contact system in MCCB

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.99-104
• /
• 2005

This paper describes the measurement and analysis of the basic line constants in PLC(Power Line Communication) in the residential building. An apartment is considered as one of the conventional residences to get the line constants in this paper, Agilent 4263B LCR Meter is used to measure the detailed values each area and the specific results and averaged analysis data are shown in the tables. The measured results are a little bit different from the calculated values using conventional formula due to the line arrangement, neglected factors, complex permittivity, and etc. This paper describes many kinds of lines and wiring figures of domestic construction. It can be utilized with the analyzed line characteristics in frequency domain as a planning reference of PLC.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.4
• /
• pp.330-336
• /
• 2012

FCEV uses 250 ~ 450 V instead of using 12 V battery. High voltage vehicle can cause electric shock, fire and explosion accident. Therefore, it has potential factors that can cause hazard of safety for users. United states of America and Europe legislate regulations such as ECE R100, FMVSS 305 for regulating electrical safety during driving or after collision. The company manufacturing high voltage components must do advanced R&D about Method for improving and confirming the safety of high voltage. We develop the specific hardware components of high voltage wiring system for the power train system and power supply system of Hyundai Motors FCEV. This paper shows test method of insulative performance for securing the electrical safety of high voltage components such as power cable, connectors and buss-bar, and proposals the guide line value for human safety of FCEV according to the test result of our development components.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.137-144
• /
• 2002

Low voltage circuit breakers which interrupt rapidly and raise the reliability of power supply are widely used in power distribution systems. In the paper, it has been investigated how much interrupting capability is improved by correcting the shape of the contact system in molded case circuit breaker(below MCCB), especially arc runner. Prior to the interrupting testing, it is necessary for the optimum design to analyze electromagnetic forces on the contact system generated by current and flux density. This paper presents both our computational analysis and test results on contact system in MCCB.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.336-341
• /
• 2016

This paper presents an implementation of a communication network in wind turbines, which exploits the power-line communication system (PLC). We used an inductive coupling unit and a multi-interface device to connect a data-communication terminal to the power line, to ensure that stable communication was possible at various electric current and voltage values of the generator. The results of the operation tests conducted on an operational wind turbine showed that the implemented PLC demonstrated a transmission rate of at least 43 Mbps with a 100% success rate. Moreover, a real-time image was transmitted. Thus, the system could be a useful alternative for implementing a communication network in wind turbines that does not require additional channels. Since the presented system is easy to implement, and can support various interfaces for data communication, it will be quite useful when a real-time monitoring system is launched in wind turbines.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.6 no.3
• /
• pp.73-80
• /
• 1996

In this paper, a new method of finding a sub-optimal solution of an autoplacer which places electrical components autiomatically in PCB CAD tools. The software implementation of the proposed method can be viewed as a new type of floorplan based on evolutionary programming. To solve this problem, three kinds of operators and a fitness function are designed. Computer simulation results demonstrate the usefulness and effectiveness of the proposed scheme in the light of computation time and effort.

• The Magazine of the IEIE
• /
• v.31 no.8
• /
• pp.61-72
• /
• 2004

통신시스템의 클락 속도는 수 GHz를 넘어 10GHz수준을 요구하고 있고, 입출력 단자에서 전송용량은 수백 Gb/s를 넘어 수 Tb/s 이상을 요구하고 있다. 이처럼 급증하는 속도와 용량을 백플랜에서 감당하게 되어, 백플랜이 시스템 성능을 좌우하는 주요부분으로 되어있다. 기존의 전기적 배선에 의한 백플랜 구성은 더 이상의 속도와 용량을 감당하기에 힘들게 되어,［1］ 신호전송을 전자 대신 빛으로 하는 광 백플랜이 그 대안으로 개발되고 있다.(중략)

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.520-522
• /
• 2002

본 논문에서는 기업 구성원들이 지식경영을 실천하는데 필수적인, 구체적 방안과 그 사례연구를 제시한다. 그 실천방안은 현업에서 쓰고 있는 암묵지를 명시지로 변환하고 이를 정보시스템을 활용하여 지식경영이론을 적용하고자 하였다. 기존의 H사 지식경영의 방식을 전사적 차원의 접근방식이라면, 본 논문에서는 실무자중심에서 상향식으로 지식경영을 실천해 가는 방법론을 제공한다. 구체적으로는, H사의 정보통신운영부의 통합배선과 업무에 지식경영을 적용하여 실제의 부서 지식경영 방침을 수립하였다. 이로써 발전된 전사적 지식경영시스템에 대한 향후 과제도출과 이해를 도모하였다.