• Journal of the Korean Institute of Gas
• /
• v.6 no.1 s.17
• /
• pp.52-58
• /
• 2002

The PIG(Pipeline Inspection Gauge) is inserted in the pipeline and stores data of pipeline. In order to investigate the status of pipeline, a lot of sensors such as caliper, pressure, IMU and odometer are used. In this paper, the navigation storage data system for PIG is developed. It has master/slave structure for a real time operation. The master system stores data, while the slave system acquire the data from sensors. The performance of the developed system is verified by pull rig test.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.2
• /
• pp.122-129
• /
• 2006

Shearography is one of optical methods that has been applied to nondestructive testing (NDT) and strain/stress analysis. The technique has the merit of the directly measuring relative displacement, which is insensitive to environmental vibration disturbance. Previous studies about the method have emphasized on extending its application to new fields and lack insufficient research on effective parameters for qualitative and quantitative evaluation of defects. In this paper, the influence of shearing amount on the detection of an internal defect is investigated. In experiment, slender defects along longitudinal direction of pipeline are artificially designed and detection results according to the change of shearing amount are analyzed. Based on the investigation, we propose the technique for the determination of defect size and accurate source location.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.13 no.1
• /
• pp.69-74
• /
• 2017

In the fire protection system or fire fighting water supply system, the jockey pump is generally installed for the prevention of the pressure decrease of pipes, the frequent driving of the fire pump and protection the pipes from the water hammer. In this paper, the pressure-rise in fire fighting water distribution pipes in condition of pipe pressurization by the surge tank at the start-up and the sudden-stop of the fire pump without additional installation of jockey pump is considered by using simple formula calculations and the evaluation of water hammer occurrence in condition of pipe pressurization by the surge tank is included. As a result, the pressure-rise of pipes is less than the pipe design pressure at the condition of pump's start-up and sudden stop, and the possibility of water hammer occurrence is remarkably low due to pressurization of the pipes by the surge tank.

• Nuclear Engineering and Technology
• /
• v.27 no.2
• /
• pp.269-279
• /
• 1995

가압경수로에서 증기발생기와 같은 주기기를 원자로 내부에 위치하도록 설계한 원자로를 일체형 원자로라고 분류하며, 기존 상용원자로와 같이 모든 주기기가 별도의 압력용기로 설계되어 배관계통에 의해 원자로 외부에 순환회로를 갖는 형태의 원자로를 분리형원자로라고 한다. 최근에 개발되고 있는 한 부류의 신형원자로에서는 원자로 및 계통의 단순성 추구와 계통의 높은 신뢰성으로 안전성 향상을 위해 동력원 사용 등의 능동적 안전개념 보다는 자연현상을 이용하는 피동안전개념이 널리 도입되고 있다. 본보고서에서는 이러한 신형원자로의 노형으로서 일체형원자로의 특성을 전통적인 분리형원자로와 비교, 분석, 평가하였다. 일체형원자로의 가장 큰 장점은 모든 주기기가 단일 압력용기 내에 위치하므로 일차계통이 매우 단순하고 대구경 배관이 없기때문에 대형 냉각재 상실사고가 근본적으로 방지되어 안전계통이 매우 단순하다는 것이다. 이 외에도 일체형원자로는 대단히 많은 일차냉각재 용량, 매우 큰 가압기 용량및 긴 운전원 조치시간등의 설계특성을 보유하고 있어 안전성이 탁월하다는 장점을 지니고 있다. 그러나, 일체형원자로는 모든 주기기가 단일 압력용기 내에 설치되므로 대형 원자로 용기가 요구되며, 원자로 압력용기의 제작성 및 운송 능력이 원자로의 용량을 제한하는 주된 요인이 된다. 일체형원자로의 활용으로 열병합 발전, 지역난방 및 선박용 원자로등의 중소형 원자로에 매우 적합하다고 판단되며, 뛰어난 안전성으로 인하여 사회적 수용성 이 강조되는 상용발전로로서도 적합한 노형이 될 수 있을 것으로 분석되었다.

• Journal of the Korean Institute of Gas
• /
• v.22 no.4
• /
• pp.74-81
• /
• 2018

The Korean Government has proceeded petroleum gas pipeline construction business since 2014 for rural districts. The operating pressure of petroleum gas pipeline are from 25kPa to 75kPa which are different from that of natural gas pipeline. Petroleum gas pipeline pressure is ten or forty times higher than natural gas operating pressure. For this reason, petroleum gas pipeline has higher probability of accident occurrence from massive gas leakage. Korea Gas Safety Corporation begins to development excess flow valves and their performance testing equipment since 2017. The excess flow valves stop the gas flow when a overflow happened in gas pipeline. The excess flow valves are generally not installed in main pipeline, because that may block massive gas supply. So, the valves are installed in starting points of branch pipes. According to the number of house and amount of gas use, a shut-off point of exxcess flow valve is determined called as Trip Flow. The trip point is the most important thing of excess flow valve, so, it is required a equipment testing the performances of excess flow valve as trip point.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.317-326
• /
• 2020

In this study, damages caused by flash fire, overpressure, and thermal radiation based on the sizes of leak holes were evaluated using the areal location of hazardous atmospheres when natural gas leaked owing to the damage of pipeline in a LNG fueled ship. In addition, environmental variables (wind speed, atmospheric temperature, and atmospheric stability) and process variables (pipe pressure and pipe length) were classified to analyze the damage impact ranges caused by various scenarios. From the results, the damage range caused by the environmental variables was the largest, followed by overpressure and thermal radiation. Additionally, for the process variables, regardless of the pressure, length, or size of the leak holes, the damage range attributed to flash fire was the most significant, and the damage range was high in the order of overpressure and thermal radiation, similar to the environmental variables. The larger the size of the leak holes, the higher the values of the environmental and process variables, and the higher the damage range caused by jet fire compared to the environmental variables.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.523-528
• /
• 2005

The flow analysis is made to simulate the turbulent flow in the pipe with an obstacle. The models used are k-$\epsilon$, k-$\omega$, Spalart-Allmaras and Reynolds. The structured grid is used for the simulation The velocity vector, the pressure contour, the change of residual along the iteration number and the dynamic head are simulated for the comparison of four example cases. For the analysis, the commercial code is used.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.68-68
• /
• 2004

기계기술의 지속적인 발달과 신기술의 개발로 인해 산업전반의 기반 기술인 기계 장치산업은 점점 복잡해지고 또한 다양화되면서 장치시설을 건전하고 신뢰성 있게 유지하고 관리하는 문제가 중요하게 대두되고 있다. 이중 가스 및 오일을 운송하는 배관은 대부분 지하에 매설되어 있고, 다양한 환경에 위치하여 있는데, 이러한 배관은 설치한지 오래되면 여러 가지 환경적 영향에 의해 부식과 같은 결함이 발생되고(Fig. 1과 Fig 2 참조) 이러한 결함이 성장하여 임계크기에 도달하여 대형 재난으로 발전하는 사고가 종종 보고 되고 있으며 이로 인한 경제적, 사회적 손실이 지대하기 때문에 매우 중요하게 인식되고 있다.(중략)

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.570-573
• /
• 2011

본 논문에서는 배관의 국부변형을 고려하여 각 배관의 특성으로 인하여 발생하게 되는 최대 응력 발생지점에 대한 평가 및 설계기법을 제안한다. 다중관은 일반적으로 배관의 매설 조건이 불안정한 곳이나 배관의 내부 유체의 유출 모니터링 및 난방관 등의 보온을 목적으로 사용되나, 다중관의 거동에 대한 거동 및 설계에 대한 연구는 미비한 실정이다. 본 연구에서 제안한 기법은 탄성범위에서 거동하는 연성관을 대상으로 하며 외관의 형상 및 외부 하중에 의하여 예상되는 국부 변형을 설계 인자로 고려하는 방법이다. 일반적인 원형관의 경우 관의 하단부에서 가장 큰 국부 변형 반경을 나타나며, 국내외에서 사용하고 있는 정사각 콘크리트 보호공의 경우 관의 상측, 하측부($45+90n^{\circ}$)에서 가장 큰 반경을 관찰할 수 있다. 이는 내압이 작용하는 구조물에 대하여 낮은 압력에도 항복에 이르는 환경을 제공하기 때문에 설계 시 반영되어야 할 중요한 요소이다.

• Journal of the Korean Institute of Gas
• /
• v.10 no.4 s.33
• /
• pp.1-5
• /
• 2006

With the rapid increase in gas consumption, the role of pipelines as a transportation means of natural gas is increasing. In general, when natural gas is being transported in pipelines, some liquid mainly from formation of condensate is introduced and this phenomenon makes operational problems more complex in the gas industry. Thus, an appropriate method is necessary for predicting the effect of presence of gas condensate on operational efficiency. In this study, a statistical model was developed using an integrated single- and two-phase flows concept. Using this model, the effects of the incipient point of gas condensate and its quantity on outlet pressure were analyzed. Also, the effect of variations of flow regimes in two-phase region on outlet pressure after the incipient point was analyzed.