• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.157-166
• /
• 2010

The aim of this paper was to estimate efficiency using a directional distance function to compare performances of bus agencies to determine if they have made efforts to operate efficiently and reduce emissions and accidents since public transportation reforms 2004. Drivers, mechanics, staff, buses, and fuel were used as input data and vehicle-kilometers (a desirable output), accident costs, and emission costs (undesirable outputs) as output data during June 2005. As a result, the efficiency with undesirable outputs was lower than the efficiency without undesirable outputs. However, the number of efficient agencies was more in case of the consideration of undesirable outputs. The reason is that the number of agencies whose possibility to reduce undesirable outputs are less than the possibility to reduce inputs was increasing, while the efficiency deviation among agencies was larger in case of the consideration of undesirable outputs. Meanwhile, the increase of CNG buses and operating speed and the improvement of mechanical efficiency had positive influence on the efficiency.

• Economic and Environmental Geology
• /
• v.49 no.4
• /
• pp.269-280
• /
• 2016

I presented three vector crustal magnetic anomaly components and six gradients by using spherical Slepian functions over the cap area of $20^{\circ}$ of radius centered on the South Pole. The Swarm mission, launched by European Space Agency(ESA) in November of 2013, was planned to put three satellites into the low-Earth orbits, two in parallel in East-West direction and one in cross-over of the higher altitude. This orbit configuration will make the gradient measurements possible in North-South direction, vertical direction, as well as E-W direction. The gravity satellites, such as GRACE and GOCE, have already implemented their gradient measurements for recovering the accurate gravity of the Earth and its temporal variation due to mass changes on the subsurface. However, the magnetic gradients have little been applied since Swarm launched. A localized magnetic modeling method is useful in taking an account for a region where data availability was limited or of interest was special. In particular, computation to get the localized solutions is much more efficient and it has an advantage of presenting high frequency anomaly features with numbers of solutions fewer than the global ones. Besides, these localized basis functions that were done by a linear transformation of the spherical harmonic functions, are orthogonal so that they can be used for power spectrum analysis by transforming the global spherical harmonic coefficients. I anticipate in scientific and technical progress in the localized modeling with the gradient measurements from Swarm and here will do discussion on the results of the localized solution to represent the three vector and six gradient anomalies over the Antarctic area from the synthetic data derived from a global solution of the spherical harmonics for the crustal magnetic anomalies of Swarm measurements.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.91-102
• /
• 2010

This study analyzed methodologies for determining the representative direction of a storm event. The mean direction, median direction, and modal direction of von Mises distribution were considered as representative directions. In addition, the results with and without considering the storm moving distance were also compared. As results, the modal directions of von Mises distribution were found to explain the directional characteristics of a moving storm much better than other methods. Also, it was found that the storm moving distance has a significant effect on the determination of representative directions of a moving storm, whose uncertainty can also be decreased significantly by considering the moving distance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.361-374
• /
• 2016

The material property of the rubber has been studied in order to improve the reliability of the finite element model of a lead rubber bearing (LRB) which is a typical base isolator. Rubber exhibits elastic behaviour even within the large strain range, unlike the general structural material, and has a hyper-elastic characteristics that shows non-linear relationship between load and deformation. This study represents the mechanical characteristics of the rubber by strain energy function in order to develop a finite element (FE) model of LRB. For the study, several strain energy functions were selected and mechanical properties of the rubber were estimated with the energy functions. A finite element model of LRB has been developed by using material properties of rubber and lead which were identified by stress tests. This study estimated the horizontal and vertical force-displacement relationship with the FE model. The adequacy of the FE model was validated by comparing the analytical results with the experimental data.

• Journal of Conservation Science
• /
• v.7 no.2
• /
• pp.60-67
• /
• 1998

The effects of moisture content (MC) and diffusion period on the diffusion of boron from borate rod through Pinus densiflora and P. koraiensis were investigated as a preliminary research of integrated remedial treatment for heritage wooden structures using borate rod. After equilibrating MCs of samples (15, 25, and 40%), borate rod (1,000 mg) was inserted into the sample, and stored for diffusion of boron at room temperatures ($23^{\circ}C$) for 2, 4, 8, and 12 weeks. Wafers were serially cut at constant intervals from rod treatment point and the boron penetration through longitudinal and transverse direction was measured by staining with boron indicator. For boron diffusion, MC above fiber saturation point was needed, and the diffusion rates increased with time. The fastest rates of diffusion were observed in longitudinal direction, followed by the radial and then the tangential direction. The rates of diffusion in all directions were the fastest in P. koraiensis. In P. densiflora, the diffusion rates through heartwood was faster than that in sapwood in longitudinal direction and vice versa in transverse direction. Based on the best result of this study, optimal space between rod insertion points could be recommended as follows; approximately 120 mm for P. koraiensis and heartwood of P. densiflora, 60 mm for sapwood of P. densiflora in longitudinal direction, and approximately 30 mm for all species tested in transverse direction. However, the effect of rod size and long-term exposure for diffusion on boron movement should be fully investigated for the accurate evaluation of optimal space between rod holes.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.434-436
• /
• 1999

MRI 촬상내의 체동에 의해 화상위에 나타나는 아티팩트를 제거하는 알고리즘에 관해서 기술한다. 종래의 반복적인 위상탐색법에 의한 제거법과는 달리, 위상 엔코딩 방향인 Y 방향의 체동에 대하여 MRI의 원리에 근거해서 체동과 화상의 위상공간에서의 대응관계를 해석해서 체동성분을 추출함으로써 아티팩트를 제거하는 새로운 알고리즘을 제안한다. 인체의 단층상에 있어서 피하지방 부위를 통과하는 Y방향의 한 라인상의 밀도분포는 대칭성을 갖고 있어 밀도분포위상의 선형성을 체동과 화상성분을 분리하기 위한 구속조건으로 사용한다. MRI 신호에 대해서 X 방향의 1차원 푸리에 변환을 행한 후의 Y 방향의 스펙트럼 위상값은 화상자신의 성분과 체동성분의 합이 되고 있다. Y 방향의 한 라인에 따른 밀도분포가 대칭인 경우에는 화상의 위상성분이 그 위치에 대해서 선형함수가 되고 있다. 이러한 구속조건에 근거한 아티팩트의 제거방법을 정식화하며, 시뮬레이션에 의해 본 방법의 유효성을 확인한다. 아울러, 체동 변동이 약간 큰 경우 및 Y 접선 영역의 대칭성이 무너진 경우에 대해서도 검토를 행한다.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.5
• /
• pp.409-415
• /
• 2009

The head-related transfer function (HRTF), which has an important role in virtual sound localization has different characteristics across the subjects. Measuring HRTF is very time-consuming and requires a set of specific apparatus. Accordingly, HRTF customization is often employed. In this paper, we propose a method to search an adequate HRTF from a set of the HRTFs. To achieve rapid and reliable customization of HRTF, all HRTFs in the database are partitioned, where a binary search tree was employed. The distortion measurement adopted in HRTF partitioning was determined in a heuristic way, which predicts the differences in perceived sound location well. The DC-Davis CIPIC HRTF database set was used to evaluate the effectiveness of the proposed method. In the listening test, where 10 subjects were participated, the stimuli filtered by the HRTF obtained by the proposed method were closer to those by the personalized HRTF in terms of sound localization. Moreover, performance of the proposed method was shown to be superior to the previous customization method, where the HRFT is selected by using anthropometric data.

• Journal of Digital Convergence
• /
• v.17 no.5
• /
• pp.117-125
• /
• 2019

This study measured inefficiencies of Korean banks with weighted Russell directional distance function, WRDDM, for the years of 2004-2013. Checking contributions of inputs and outputs to these inefficiencies, we found that non-performing loan as undesirable output was the most influential factor. The annual average of inefficiencies of Korean banks was 0.3912, and it consisted of non-performing loan 0.1883, output factors 0.098 except non-performing loan, input factors 0.098. The annual average inefficiency went sharply up from 0.2995 to 0.4829 mainly due to the sharp increase of inefficiency of non-performing loan from 0.1088 to 0.2678 before and after 2007-2008 Global financial crisis. We empirically showed the non-performing loan needed to be considered since it was the most important factor among the influential factors of technical inefficiency such as manpower, total deposit, securities, and non-performing loan. This study had some limitation since we did not control financial environment factor in WRDDM.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.2
• /
• pp.143-156
• /
• 2015

The stress and displacement fields at the crack tip were studied during the unsteady propagation of a mode III crack in a direction that was different from the property graduation direction in functionally graded materials (FGMs). The property graduation in FGMs was assumed based on the linearly varying shear modulus under a constant density and the exponentially varying shear modulus and density. To obtain the solution of the harmonic function, the general partial differential equation of the dynamic equilibrium equation was transformed into a Laplace equation. Based on the Laplace equation, the stress and displacement fields, which depended on the time rates of change in the crack tip speed and stress intensity factor, were obtained through an asymptotic analysis. Using the stress and displacement fields, the effects of the angled property variation on the stresses, displacements, and stress intensity factors are discussed.

• Annual Conference of KIPS
• /
• 2009.11a
• /
• pp.609-610
• /
• 2009

Diffie-Hellman의 키 교환 방식은 공개된 통신망에서 사전 정보 공유 없이 공통된 세션 키를 생성할 수 있는 획기적인 방법이었지만, 중간자 공격이 가능하다는 문제점을 가지고 있다. 이러한 문제를 해결하기 위해 Seo와 Sweeny가 제안한 SAKA(Simple Authenticated Key Agrement) 프로토콜은 간단한 패스워드를 사용함으로써 두 사용자들 사이의 인증과 공통 세션 키를 생성할 수 있는 프로토콜이다. 그러나 SAKA 프로토콜은 키 검증단계에서 많은 취약점을 가지고 있다. 본 논문에서는 SAKA 프로토콜의 취약점을 해결하기 위하여 새로운 키 교환 프로토콜을 제안한다. 제안한 프로토콜은 기존의 SAKA 프로토콜이 갖는 장점을 유지하고 일 방향 해시함수를 이용하여 취약점을 효율적으로 해결할 수 있다.