• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.327-327
• /
• 2021

하수재이용에서 전처리 막여과 공정은 완벽한 고액분리로 인해 후단 역삼투막 손상을 줄일 수 있는 공정으로 각광을 받고 있다. 일반적으로 막여과 공정은 여과->물리세정->충진->여과 와 같은 제막사에서 제공하는 운전 사이클에 맞춰 적용하고 있으며 유지세정 역시 1회/일 또는 1회/주 단위로 정해진 범위에서 수행되고 있다. 이러한 운전 방식은 시시각각 변화하는 막 유입수질에 적절하게 대응하지 못해 장기적으로 막오염 발생에 따른 생산수량 감소는 물론 막오염 제거를 위한 화학세정 주기가 짧아져 전체적인 생산수량이 감소하는 원인이 되고 있다. Raffine(2012)에 따르면 가역적 막오염의 경우 Flux 증가에 큰 영향이 없으나 비가역적 막오염은 Flux 증가에 따라 급격히 증가한다고 보고하고 있으며 이는 제한된 분리막 면적당 처리수 생산량을 증가시키기 위해 비가역적 막오염의 발생량을 줄이는 것이 필요하며 이를 위해 주기적인 강화역세(Chemical Enhanced Backwashing, CEB)가 도입되고 효율적인 유지세정 방법에 대한 연구가 진행되고 있다. 당사에서는 일산에 있는 I 수질복원센터내에 25 m³/일 규모의 막여과 하수재이용 파일롯 플랜트를 설치하고 막여과 하수재이용 공정의 운영 효율을 높이기 위하여 W사에서 개발한 IntelliFluxControl(IFCr) 소프트웨어를 이용하여 하수재이용 막여과 성능을 확인 하였다. IFCr은 실시간으로 변화하는 수질에 따른 막오염 정도에 따라 역세 강도 및 빈도와 CEB 적용 정도를 변화시켜 분리막 운전의 효율을 높일 수 있는 운영 소프트웨어이다. I 수질복원센터의 하수 방류수를 막여과 유입수로 적용하여 40 LMH를 기준으로 IFCr을 적용하지 않은 경우 23.7일 운전 가능하였으나 IFCr을 적용한 경우 50일 연속 운전이 가능하였다. 또한 역세척수를 운전 기간 동안 약 50 m³을 사용한 반면 IFCr을 적용한 경우 이에 절반 수준인 24.1 m³ 만 사용하여 회수율이 91%에서 95%로 증가한 것을 확인 할 수 있었다. 본 연구의 결과는 기존의 제막사에서 제시하는 막 공정 운영방법을 탈피하여 분리막이 갖고 있는 성능을 최대한 끌어 올릴 수 있는 연구 결과라고 판단되며 향후 스케일 업 연구를 통해 실제 플랜트에 적용 가능성이 확인 될 경우 시설의 설치 막모듈 개수와 유지관리비를 동시에 절감할 수 있는 기술이 될 수 있을 것이다

• Journal of Service Research and Studies
• /
• v.11 no.2
• /
• pp.79-93
• /
• 2021

The size of the domestic art market has increased 21.9% over the past five years as of 2018 to KRW 448.2 billion and the number of transactions has also increased 31.6% to 39,367 points maintaining growth for the fifth consecutive year. Art distribution platforms are diversifying from galleries and auction-style offline to online auctions. The art market consists of three areas: production (creation), distribution (trade), and consumption (buying) of works and as the perception of artistic value as well as economic value spreads interest is also increasing as a means of investment. Consumers who purchase works and think of them as a means of investment technology have an increased need for objective information about their works, but there is a limit to collecting and analyzing objective and reliable statistics because information provision in the art market distribution area is closed and unbalanced. This paper identifies objective and reliable art distribution status and status through big data collection and structured and unstructured data analysis on art market distribution areas. Through this, we want to implement a system that can objectively provide analysis of authors in the current market. This study collected author information from art distribution sites and calculated the frequency of associated words by writer by collecting and analyzing the author's articles from Maeil Business, a daily newspaper. It aims to provide consumers with objective and reliable information.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.661-667
• /
• 2006

In this study, an experiment of sewage sludge dewatering is carried by using electrokinetic method, and the electrokinetic dewatering efficiency of digested sludge is analyzed. Digested sludge without coagulants is selected and gravitational and pressing dewatering methods are applied in combination with electro-osmotic and electro-osmotic pulse technology. After the test of digested sludge, dewatering test of thickened sludge is carried to evaluate the electrokinetic dewatering feasibility of thickened sludge. Under the condition of constantly applied voltage, however, electrical resistance increases with decreasing of water content so that dewatering rate decreases with time. To reduce such a hindrance caused by constantly applied voltage, electro-osmotic pulse technology which is considered to reduce the difference of water content with height, is applied. For the application of electro-osmotic pulse, the dewatered flow rate and the dewatered volume became more increasing from the middle of the dewatering process than that of continuous voltage. Through the test of thickened sludge, electro-osmotic dewatering combined with gravitational and expression also showed high dewatering rate, which proved the possibility of using electrokinetic dewatering.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.691-697
• /
• 2008

Coating the high tension bolted frictional joint has been generally allowed for anti-corrosion purpose. However in case of painting on paying surface of the high tension bolt, the influence on a slip strength of the joint depending on precision of painting has remained controversial. The study thus was intended to identify the slip behavior on high tension bolted frictional joint when applying ceramic painting, which has been currently developed. A slip test was conducted on a high tension bolted frictional joint specimen on which ceramic painting has been applied and a slip load and slip coefficient were measured. Based on result, the safety and usability of ceramic painting-applied high tension bolted frictional joint was evaluated. As a result, a difference to some extent by specimen in terms of load-displacement when a slip occurred was observed but an average slip coefficient appeared to have exceeded 0.4, which is the design frictional coefficient set forth in the specification. To secure the safety and usability of ceramic painting-applied high tension bolted frictional joint, it's necessary to establish the standard for painting as well as to revise the relevant specification.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.1003-1010
• /
• 2006

This study developed a traffic accident information management system based on WebGIS that can process a lot of data for giving effectively diagnosis of traffic accidents in serious damage circumstances by traffic accident. Also, this study presents a way to compose and to convey traffic accident information. In addition, non-spatial attributes as well as spatial attributes about traffic accidents information be integrated and managed by the system. To provide Web service, we developed modules that can supply visually spatial information and traffic accidents data through ASP, Javascript, ArcIMS based on Web and constructed a server. And constructed system include a function that offer the now situation of traffic accident in real time, which supply the statistical data of traffic accident through Web as soon as user entry data in comparison with previous way that preparatory period until traffic accidents data is supplied to peoples had been long. Traffic accidents are analyzed with only nonspatial attribute by simply collecting in the past. However, system constructed by this study offer new function that can grasp visually accident spot circumstance and use detailed content and accurate location data as well as statistical data of traffic accidents. Also, it offer interface that can connect directly with accident charge policeman.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.47-60
• /
• 2023

A thorough inventory of ship emissions, particularly ship's emission of in-port area is necessary to identify significant sources of exhaust gases such as NOx, SOx, PM, and CO₂ and trends in emission levels over time, and reduce their serious effects on the environment and human health. Therefore, the goal of this study is to assess the volume of emissions from ships in Mokpo port, which serves as a gateway to the southwest coast of Korea, using a bottom-up methodology and data from the automatic identification system (AIS) and the Korean Port Management Information System (Port-MIS). In this work, an analysis of ship movement utilizing AIS data and an actual set of data on ship specification were gathered. By examining ship movement using AIS data, We also proposed a new approach for identifying cruising/maneuvering mode. Finally, the results were classified by ship operating mode, by exhaust gas, by ship type, and by berth, which provides a thorough and in-depth analysis of the air pollution caused by ships in Mokpo port.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_3
• /
• pp.1679-1692
• /
• 2023

South Korea is a country that emits a large amount of pollutants as a result of population growth and industrial development and is also severely affected by transboundary air pollution due to its geographical location. As pollutants from both domestic and foreign sources contribute to air pollution in Korea, the location of air pollutant emission sources is crucial for understanding the movement and distribution of pollutants in the atmosphere and establishing national-level air pollution management and response strategies. Based on this background, this study aims to effectively acquire spatial information on domestic and international air pollutant emission sources, which is essential for analyzing air pollution status, by utilizing high-resolution optical satellite images and deep learning-based image segmentation models. In particular, industrial parks and quarries, which have been evaluated as contributing significantly to transboundary air pollution, were selected as the main research subjects, and images of these areas from multi-purpose satellites 3 and 3A were collected, preprocessed, and converted into input and label data for model training. As a result of training the U-Net model using this data, the overall accuracy of 0.8484 and mean Intersection over Union (mIoU) of 0.6490 were achieved, and the predicted maps showed significant results in extracting object boundaries more accurately than the label data created by course annotations.

• Journal of Venture Innovation
• /
• v.5 no.1
• /
• pp.145-154
• /
• 2022

This study briefly compares the first-cycle certification of nursing hospitals with the second-cycle certification, reviews the changes and achievements of the second-cycle certification and the third-cycle certification, and examples of challenges and solutions in the process of preparing the third-cycle certification. In this study, it is suggested as follows. First, in order to see the practical effect of certification intended by the government, the exhibition is prepared in a short period of time before certification. Second, after the implementation of the nursing hospital certification system, research on the hospital performance of the medical institution certification system is insufficient in terms of quality and quantity. Therefore, in order to see the effect on the certification system, various research support is also required so that research on this can be actively conducted. Third, design certification standard guidelines from a long-term perspective so that the standard guidelines for certification do not change significantly, and certify not only the guidelines but also individual standards and forms that can be used by medical institutions. Fourth, in the four-cycle certification, accurate and realistic guidelines for infection control and quarantine ward operation support should be developed. The importance of managing infectious diseases will be highlighted in the future due to COVID-19. Fifth, medical institutions can improve the quality of medical care in nursing hospitals and have competitiveness if their daily activities, not short-term certification preparation, are carried out in accordance with certification standards, which affects performance. Sixth, when preparing for certification, nursing hospital officials have problems in organizing documents or processing administratively in the short term as in the past. This is also based on the certification criteria for the usual business process.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.8-16
• /
• 2023

The importance of next-generation packaging technologies is being emphasized as a solution as the miniaturization of devices reaches its limits. To address the bottleneck issue, there is an increasing need for 2.5D and 3D interconnect pitches. This aims to minimize signal delays while meeting requirements such as small size, low power consumption, and a high number of I/Os. Hybrid bonding technology is gaining attention as an alternative to conventional solder bumps due to their limitations such as miniaturization constraints and reliability issues in high-temperature processes. Recently, there has been active research conducted on SiCN to address and enhance the limitations of the Cu/SiO₂ structure. This paper introduces the advantages of Cu/SiCN over the Cu/SiO₂ structure, taking into account various deposition conditions including precursor, deposition temperature, and substrate temperature. Additionally, it provides insights into the core mechanisms of SiCN, such as the role of Dangling bonds and OH groups, and the effects of plasma surface treatment, which explain the differences from SiO₂. Through this discussion, we aim to ultimately present the achievable advantages of applying the Cu/SiCN hybrid bonding structure.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.55-60
• /
• 2023

When performing the multiplication m×r=p of two binary numbers m and r on a computer, there is a shift-and-add(SA) method in which no time-consuming multiplication is performed, but only addition and shift-right(SR). SA is a very simple method in which when the value of the multiplier r_i is 0, the result p is only SR with m×0=0, and when r_i is 1, the result p=p+m is performed with m×1=m, and p is SR. In SA, the number of SRs can no longer be shortened, and the improvement part is whether the number of additions is shortened. This paper proposes an SA method to minimize addition based on the fact that setting a smaller number to r when converted to a binary number to be processed by a computer can significantly reduce the number of additions compared to the case of setting a smaller number to r based on the decimals that humans perform. The number of additions to the proposed algorithm was compared for four cases with signs (-,-), (-,+), (+,-), and (+,+) for some numbers in the range [-127,128]. The conclusion obtained from the experiment showed that when determining m and r, it should be determined as a binary number rather than a decimal number.