• Explosives and Blasting
• /
• v.18 no.4
• /
• pp.7-18
• /
• 2000

일반적으로 발파진동은 건설공사에 따른 굴착작업, 채광 및 채석작업 등의 발파에 따라 발생되며, 최근에는 환경문제에 대한 관심이 높아지면서 발파진동이나 소음에 대한 관심이 높고 또한 많은 민원이 발생되고 있다. 발파 작업장 주변지역에서 발파에 따라 발생하는 지반 및 구조물의 진동을 파악하고, 발파에 의한 모든 영향을 파악하기 위한 자료획득을 목적으로 관계 기관에 의해 진동측정이 실시되고 있다. 그러나 발파진동측정에 대한 통일적인 방법이나 지침이 없기 때문에 현장실무에서 측정방법이나 자료처리방법 등에 많은 어려움이 따르고 있다. 따라서 발파진동의 측정방법들에 대해 고찰함으로써 발파진동 측정방법에 대한 이해를 높이고자 한다.

• Proceedings of the KSEE Conference
• /
• 2006.10a
• /
• pp.201-216
• /
• 2006

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.5 no.2
• /
• pp.29-51
• /
• 2003

• 도로교통
• /
• s.107
• /
• pp.64-67
• /
• 2007

• Tunnel and Underground Space
• /
• v.18 no.6
• /
• pp.418-426
• /
• 2008

A surface blasting method with a single tree face is currently used in Pasir Coal Mine in Indonesia. The single free face is usually the ground surface. This kind of blasting method is easy to use but inevitably causes enormous ground vibrations, which, in turn, can affect the stability of the slopes comprising the various boundaries of the open pit mine. In this regard, we decided to make a specific blasting guideline for the control of found vibrations to ensure the safety of the pit slopes and waste dumps of the mine. Firstly, we derived a prediction equation for the ground vibration levels that could be occurred during blasting in the pits. Then, we set the allowable levels of ground vibrations for the pit slopes and waste dumps as peak particle velocities of 120mm/s and 60mm/s, respectively. From the prediction equation and allowable levels, safe scaled distances were established for field use. The blast design equations for the pit slopes and waste dumps were $D_s{\geq}5\;and\;D_S{\geq}10$ respectively. We also provide several standard blasting patterns for the hole depths of $3.3{sim}8.8m$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.310-315
• /
• 2017

Although studies evaluating the effects of the blasting vibration on the adjacent structures from various angles have continued, cases of securing the safety of the adjacent buildings and researching the proper blasting method for the field condition by analyzing the vibration waveform of the measuring field while performing the open pit blasting are poor. Therefore, it is necessary to present a remedy for blasting pattern selection through test blasting that is appropriate for field conditions, and is economical and efficient. In this study, open pit blasting work was conducted based on the separation distance applied according to the standard blasting method by test blasting and the vibration regulation standard in the road expansion construction site to measure the blasting vibration value, and the vibration prediction equation by blasting methods was examined using a regression analysis computer program to calculate K, N, and R of the confidence level 95%. By setting the blasting allowed vibration standard of the test blasting target area to 0.3cm/sec, and the charring weight and blasting method by the separation distances according to the blasting vibration estimation equation of the open pit blasting guideline and the blasting vibration estimation equation of the test blasting were compared/analyzed, it was possible to identify the factors that increased the working expenses. In addition, the measurement and analysis of the adjacent structures during open pit blasting and the blasting vibration were performed after selecting the most adjacent structure to the open pit blasting spot to analyze the problems on the test blasting procedure and analysis method in the open pit blasting design/construction guidelines, which appeared in the process of completing open pit blasting construction, and a remedy is presented.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.24 no.2
• /
• pp.25-38
• /
• 2022

• Explosives and Blasting
• /
• v.21 no.4
• /
• pp.11-21
• /
• 2003

An experimental study was carried out in order to reduce the period and cost of construction of Missiryung tunnel, which is a relatively long one 3.6 km long. An allowable vibration level for curing concrete was established based on the extensive case studies done over the world. and assessment was performed on the possibility of constructing concrete structures like lining during tunnel blasting. Attenuation relationships were obtained by processing more than 130 measurement data from a series of tunnel blasting in the site. A Guideline for safe construction work was suggested. To verification, low small concrete blocks with a constant standoff distance were installed in the floor of the tunnel After the blocks were exposed to blast vibrations for 28 days, compressive strength tests were performed on 20 specimens taken from the blocks. It was shown that the suggested guideline was appropriate for the safe construction work at the site.

• Explosives and Blasting
• /
• v.24 no.1
• /
• pp.57-62
• /
• 2006

The typical blasting method adopted in Pasir Coal Mine is a surface blasting technique with a single free face. It means that there is only one free face, which is usually the ground surface. This kind of blasting method is easy to use but inevitably causes enormous ground vibrations, which, in turn, can affect the stability of the slopes comprising the various boundaries of the open pit mine. In addition, the method also has the problem of lowering the blast efficiency compared to other methods such as bench blasting methods or ones with more than two free faces. In this respect, a project was launched to develop a new blasting method that is suitable for controling the ground vibration and enhancing the blast efficiency. As a part of the project, authors investigated the current blasting method as well as the overall pit developing process in the mine, and established some important guidelines that should be observed during the whole development process. This paper presents the details of the typical blasting pattern and the pit developing method in the mine, and suggests the guidelines determined from the results of the observations.

• Proceedings of the KSEE Conference
• /
• 2004.08a
• /
• pp.49-75
• /
• 2004

소음진동 규제법의 강화, 각종 건설민원 발생 및 안전강화 관리 차원에서 현재 국내 터파기 현장 및 각종 토공사에서 종래 시행되어지던 발파공법만으로 시행하는 것은 곤란하다. 건설교통부 설계 지침에서도 진동 규제치의 차이를 두어 파쇄와 발파와의 차이를 확연히 구분하는 실정이다. 기존에 발파는 그 경험이 많아 효과적인 방법 등이 널리 알려져 있지만 파쇄의 경우는 그 시공사례가 많지 않아 그 연구의 필요성이 대두되고 있다. 본 연구는 건교부에서 제시한 암파쇄굴착공법에 사용되어지는 미진동 파쇄기에 대한 연구로써 연암, 보통암, 경암지역에서의 전색제, 적정 패턴, 진동 특성 등을 분석하는데 그 목적이 있다. 시험은 크게 1, 2 타입으로 구분하여 실시하였으며 1타입의 경우는 천공장이 1.5m(180g 장약)이고, 2타입의 경우는 2.5m(360g)이다. 두 패턴을 기본으로 저항선, 공간격을 달리하여 시험을 진행하면서 그에 따르는 진동 및 파쇄정도의 차이를 관찰할 수 있었으며 암석 강도별 예상 진동식을 제안하였다.