Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.115-115
/
2011
최근 유기물을 사용한 유기 태양 전지의 주된 제작 방식은 유기물질을 유기용매에 녹여 사용 하는 스핀코팅 방식이다. 스핀코팅은 박막 형성이 쉽고 대량생산이 용이하다는 장점이 있지만, 표면분석의 측면에서 보면 박막이 한번에 형성되기 때문에 전극 위에 유기물질이 박막을 형성하는 순간의 계면을 측정하기 어렵다. 그에 반해 진공전기분무 방식은 진공에서 얇은 박막에서부터 점차적으로 두께를 늘려가며 증착 할 수 있고 또한 증착이 진공에서 이루어져서 불순물을 최소화 할 수 있기 때문에 표면분석의 측면에서 용이하다. 특히 본 실험에서는 유기 태양전지에서 벌크 이질접합(bulk heterojunction)을 만드는데 널리 쓰이는 물질인 Poly(3-hexythiophene) (P3HT)과 (PCBM)을 toluene에 녹인 후(0.2 mg/ml), 4-5 kV 사이의 전압을 인가하여, 고전압을 걸어 준 뒤 $5{\times}10^{-6}$ torr의 조건에서 분무하여 Indium Tin Oxide (ITO) 위에 박막의 두께를 늘려가며 증착시켰다. 이렇게 ITO 위에 만들어진 P3HT와 PCBM의 박막을 Photoemission spectroscopic (PES)을 이용하여 따른 화학적 구조와 전자구조를 분석하였고, 또한 동일한 농도의 용액으로 스핀코팅 방법을 이용하여 만든 시료와 앞서 언급한 조건의 진공전기분무 방법을 이용하여 만든 시료 사이의 표면거칠기와 morphology는 Atomic Force Microscopy(AFM)을 이용하여 비교 분석하였다.
본 연구는 수출용 가지를 최적 염절임 조건으로 절임한 후 저장 중 품질 변화에 대하여 조사하였다. 저장 기간이 길어질수록 모든 조건에서 명도와 황색도는 증가하지만, 진공포장한 절임가지의 명도와 황색도는 침지저장한 것에 비해 변화가 적었다. 절임가지의 염도는 절임초기에는 축양 품종과 시키부 품종에서 각각 24.67, 20.27%이었으며 진공포장 한 것은 저장 5일 이후에는 변화가 없었으나, 침지저장 한 것에는 저장중에 계속 감소하였다. pH의 변화는 품종과 저장방법에 관계없이 저장중에 감소하였으며, 수분함량은 절임중에 급격하게 감소하여 축양 품종과 시키부 품종에서 각각 79.93, 82.56%이었으며, 진공포장하여 저장한 절임가지에서는 5일째에 증가하였고 이후에는 변화가 없었으나. 침지저장 방법에서는 두 품종 모두 15일까지 증가하였다. 또한 수용성 단백질 함량의 변화도 수분 함량의 변화와 비슷하였다 비타민 C의 함량은 생가지 보다 두 품종 모두 최적조건으로 염절임 한 가지에서 높아 축양 품종과 시키부 품종에서 각각 21.41, 24.53 mg/100g이었으며, 저장중에 그 함량이 감소하였고, 진공포장 저장한 방법이 침지저장한 방법에 비해 감소하는 경향이 적었다 저장기간에 길어질수록 나트륨과 마그네슘의 함량은 감소하였으나 반대로 칼륨의 함량은 증가하였고 특히 침지저장한 방법에서 이와 같은 변화가 두드러졌다.
Cleaning effect of RF/DC discharge to clean the surface of vacuum chamber was studied for various discharge conditions. Glow discharge cleaning without baking reduced the outgassing rate to 1/2, which was similar to that after the only baking treatment alone. Glow discharge cleaning treatment with baking improved the cleaning efficiency and then the outgassing rate was remarkably reduced to 1/20. It was found that the ion energy and the ion density were important factors in cleaning the surface. RF discharge cleaning was more effective than BC discharge cleaning.
We have examined the electrical and optical characteristics of the plasma display panel(PDP) produced by vacuum in-line sealing technology. We found that the luminous efficiency was decreased as the base vacuum level was increased. For the base vacuum level of $1\times10^{-3}$ Torr, the firing voltage was 235V at the discharge gas pressure of 400 Torr and the luminous efficiency was 0.8 lm/W at 180V sustaining pulse. However, for the base vacuum level of $1\times10^{-6}$ Torr, the firing voltage was reduced to 215V and the luminous efficiency was improved to 2.5lm/w. Finally, we demonstrated successfully the operation of tip-less PDP fabricated using vacuum in-line sealing method.
Proceedings of the Korean Vacuum Society Conference
/
2012.08a
/
pp.297-297
/
2012
Parylene 코팅은 다결정인 고분자 유기물에 열을 가하여 기화시켜 진공상태에서 피사체를 코팅하는 것으로 마이크로 두께 단위의 유전체 증착하는 것이다. Parylene 코팅은 주로 Display를 비롯한 태양전지, 반도체 등에서 다양한 산업분야에서 이용되며, 이 때 외부로부터 침투하는 수분을 방지하고, 전기적 절연 및 불순물로부터 피사체를 보호하여 기계적인 안정성을 목적으로 사용된다. Display와 태양전지는 빛을 이용하는 분야로써 Parylene을 투과하여 들어오는 빛의 전달효율에 따른 영향이 크게 고려되어진다. 빛의 전달효율을 높이기 위해서는 Parylene의 높은 투명도가 중요한 요소로 작용한다. 본 연구에서는 Parylene 코팅 박막의 투명도 상승을 위해 증착 시 다양한 진공조건으로 실험을 진행하였다. Parylene 코팅 시, 진공도에 따른 투명도를 평가하기 위해 Substrate로는(100%)투과율을 가지는 재질의 glass를 이용하였다. Parylene 종류로는 반도체분야에 주로 이용되는 C-type의 Parylene Polymer 사용하였다. 증착 조건으로는 $7{\sim}8{\times}10^{-2}$ Torr, $4{\sim}6{\times}10^{-2}$ Torr, $2{\sim}3{\times}10^{-2}$ Torr의 각각 다른 진공 조건에서 120분간 증착시켜 Parylene 코팅막을 형성하였다. 또한 높은 투습방지력을 가짐과 동시에 고투명도 유지에 대해 신뢰성평가를 하기위해 각 조건별로 1회, 3회, 5회 반복 증착하였다. 제작된 각 시편의 투명도 측정을 위해 광도계(DX-100, TAKEMURA)를 이용하여 빛의 투과율을 관찰하였다. 그 결과 진공도 $2{\sim}3{\times}10^{-2}$ Torr, $4{\sim}6{\times}10^{-2}$ Torr, $7{\sim}8{\times}10^{-2}$ Torr순의 시편이 높은 투과율을 나타내었으며, 그 중 $2{\sim}3{\times}10^{-2}$ Torr의 1회 증착 한 시편이(97%)로 가장 높은 투과율을 나타내었다. 반대로 $7{\sim}8{\times}10^{-2}$ Torr의 5회 증착 한 시편이(78%)로 가장 낮은 투과율을 보였다. 따라서 진공도가 높을수록 투명도가 상승하며, 증착횟수가 늘어날수록 투명도가 감소하는 것을 알 수 있었다. 본 연구의 결과로 Parylene 코팅의 진공도에 따른 투명도를 평가함으로써 Parylene 코팅 증착조건 최적화를 위한 기초자료로 이용될 것이라 사료된다. 또한 후속 연구로써 substrate의 온도조절과 시료량의 조절이 이루어진다면 좀 더 효율적으로 최적화된 박막형성이 가능할 것이라 판단된다.
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.149.2-149.2
/
2014
진공용기를 배기하기 시작하면 짧은 시간 동안은 공기의 배기가 주를 이루지만 그 후에는 표면 방출 기체의 배기가 이어지고 표면방출 기체의 대부분은 물이라는 것은 누구나 알고 있는 사실이다. 그러나 배기 계산을 할 때는 막상 물 보다는 공기의 일부로 생각하거나 수분을 다른 기체들과 유사하게 다루는 것에 익숙해져 있다. 이런 계산 결과는 실제 상황을 재현하지 못할 뿐만 아니라 일반적으로 배기능력을 과대평가하게 만들어서 공정 계획대로 진공 시스템을 운전하는 것을 불가능하게 만든다. 물은 일반적인 기체와는 성격이 아주 다르다. 다른 기 체 분자들의 흡착 에너지가 ~0.3 eV이고 기름분자가 ~1 eV 정도인 것에 반해 물은 0.55 eV 내외로 상온에서도 비교적 흡착을 잘하고 또 적당히 방출도 일어나는 특별한 특성 때문에 용기 압력을 지배하면서도 신속한 배기를 방해한다. 만일 이런 물의 흡착률 및 방출률을 제대로 수치화할 수 있다면 배기 계산을 훨씬 현실화할 수 있다. 물의 흡착률은 물분자의 부착계수가 지배하고 방출률은 체류시간에 의해 결정되지만 표면상태에 따라 천차만별이므로 얼마라고 확정하기 어렵다. 우선 이번에는 물의 부착계수 최대값을 0.1 정도로 잡고 흡착량에 따라 직선적으로 줄어드는 것으로 가정하며, 물의 표면 체류시간도 몇 가지 값으로 가정해서 0-D 입자 평형 계산을 수행하여 특정 시스템에서 얻은 실험 결과와 비교하려고 한다. 앞으로 몬테카를로 방법과 연계하여 3차원적 분석을 할 수 있는 코드로 발전시켜 나갈 예정이다.
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.195.1-195.1
/
2014
최근 반자성 물질인 $MoS_2$를 수소 기체 속에서 열처리하게 되면 약한 강자성이 유발된다는 연구가 보고되었다. 본 연구에서는 강자성 발현을 수반하는 물리적 및 화학적 변화를 이해하기 위해서 단일층 $MoS_2$에 대한 라만분광 및 광발광 연구를 수행하였다. 기계적 박리법을 이용하여 $MoS_2$ 결정으로부터 단일층 및 이중층 $MoS_2$를 분리하여 $SiO_2/Si$ 기판에 전사한 후, $200^{\circ}C{\sim}500^{\circ}C$ 영역의 특정 온도에서 1시간 동안 열처리하였다. 배경 기체가 열처리 도중 $MoS_2$에 미치는 영향을 이해하기 위하여 수소 속 반응을 진공 상태와 비교하였다. 라만 스펙트럼에서는 큰 변화가 없었으나, 광발광의 세기는 수소 속 반응 후에 감소하고 진공 속 반응 후에는 증가하는 대조적인 결과를 보였다. AFM 측정으로부터는 열처리 후에 $MoS_2$ 표면에 뚜렷한 변화가 일어나지 않는다는 사실을 확인하였다. 본 발표에서는 수소와 진공 조건에서 관찰된 상이한 광발광 특성과 그래핀/$SiO_2/Si$에서 관찰된 p-형 도핑과의 상관관계를 설명하고자 한다.
Various sterilization temperatures $(110^{\circ}C,\;120^{\circ}C,\;130^{\circ}C)$ and air volumes (air, 31ml, half-vacuum; 13ml, vacuum; -0.7ml) within the retort pouch were tested for the development of the simple retort rice processing techniques in which the pouch were filled with rice and water, and then sterilized. Water content of retort rice was found to be 59.0-63.3% resulting from mixing the rice and water in the ratio of 1:1.1. The most uniform water content was obtained from retort rice sterilized at $130^{\circ}C$ and packaged under vacuum. The larger water content differences were observed with the increase in internal air volumes within the retort pouch. Spreading degree of retort rice was geater than that of general cooked rice, was lower in upper layer than in low layer, and became lower with the larger air volume and higher sterilization temperature. a degree of rice became higher with the Increase of sterilization temperature but that was not affected by the internal air volume of the pouch. The higher sterilization temperature and the lower the air volume, the higher the whiteness was. The highest whiteness was obtained by packaging under vacuum and sterilizing at $130^{\circ}C$. Intact degree was much higer in packaging under air than vacuum. In sensory evaluation the retort rice of vacuum pack was good in color and spreading degree but not in appearance because of blocking and deforming, but that of air pack was good in texture on the contrary. The best quality was obtained by packaging under half-vacuum and sterilizing at $130^{\circ}C$.
Transactions of the Korean Society for Noise and Vibration Engineering
/
v.14
no.11
/
pp.1176-1181
/
2004
In high-capacity disk drives with ever-growing track density, the allowable level of position error signal(PES) is becoming smaller and smaller. In order to achieve the high TPI(track per inch) disk drive, it is necessary to improve the writing accuracy during the servo track writing(STW) Process through the reduction of track mis-registration sources. Among the main contributors of the non-repeatable runout(NRRO) PES, the disk vibration and the head-stack assembly vibration is considered to be one of the most significant factors. Also the most contributors of repeatable runout(RRO) come from the contributors of NRRO which is written-in at the time of STW process. In this paper, the effect of NRRO on servo written-in RRO is Investigated by experimentally, and the experimental result shows that the written-in RRO can be effectively reduced through a STW process under low dense medium condition such as semi-vacuum.
The structure and optical properties of n-type and p-type porous silicon (PS) prepared by the chemical etching in the light and the dark, respectively, are reported in this paper. Microstructural features of the samples are mainly investigated by SEM, AFM XRDGI techniques. Also, their optical properties are investigated by photoluminescence (PL) and Fourier transform infrared absorption measurements. In the n-type PS, the room temperature photoluminescence is observed in a visible range from 500 nm to 650 nm in contrast to that in the blue region (400∼650 nm) in p-type PS. Further, semi-transparent Cu films in thickness range of ∼40 nm are deposited by rf-magnetron sputtering on PS to investigate the I-V characteristics of the samples.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.