• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.80-84
• /
• 2014

Polymer nanoparticles with cross-linked core and PBA/PS double-shell were synthesized and their baroplastic properties were characterized. PBA/PS, the inner and outer shell with cross-linked core consisting of St and DVB were synthesized by three-stage emulsion polymerization. The obtained materials exhibited pressure-induced mixing of their components and could be processed at $25^{\circ}C$ by compression molding which means there was no effect of the presence of cross-linked core. Interestingly, the Young's modulus of molded objects has found to be affected strongly by the size of double-shell nanoparticles. Furthermore, the molded object of higher PBA content was successfully recycled 5 times at $25^{\circ}C$ and showed 0.55 MPa of modulus and 1.81 MPa of strength at break.

• Journal of Aerospace System Engineering
• /
• v.17 no.4
• /
• pp.18-27
• /
• 2023

In this paper, the structural-thermal-optical performance analysis of the mirror was performed by setting the laser heat source as the boundary condition of the thermal analysis. For the laser heat source model, the Beer-Lambert model considering semi-transparent optical material based on Gaussian beam was selected as the boundary condition, and the mechanical part was not considered, to analyze the performance of only the mirror. As a result of the thermal analysis, thermal stress and thermal deformation data due to temperature change on the surface of the mirror were obtained. The displacement data of the surface due to thermal deformation was fitted to a Zernike polynomial to calculate the optical performance, through which the performance of the mirror when a high-energy laser was incident on the mirror could be predicted.

• Journal of Marine Life Science
• /
• v.1 no.2
• /
• pp.95-108
• /
• 2016

This study was performed to investigate the community structure of macrobenthic assemblages in the Environmental Conservation area, Korea. Benthic animals were collected by van Veen grab sampler at spring (May) and summer (August) 2009. The total species number and mean density were 195 species 5.6 m^-2 and 667 individuals m^-2, respectively. Polychaetes were the most dominant faunal group in species (96 species) and abundance (431 individuals m^-2). The major dominant species were the polychaetes Lumbrineris longifolia (76±224 individuals m^-2), Mediomastus californiensis (42±117 individuals m^-2), Tharyx sp.3 (26±110 individuals m^-2), the bivalvia Theora fragilis (54±78 individuals m^-2) and the amphipod Eriopisella schellensis (70±146 individuals m^-2). Based on the cluster and nMDS ordination analysis, macrobenthic communities were divided into three faunal groups. The first group was characterized by high abundance of the polychaeta Sternaspis scutata and the amphipod Ampelisca cyclops iyoensis, which is located by most stations of Hampyeong Bay and St. 4 of Deungnyang Bay. The second group was numerically dominated by the polychaeta Capitella capitata at St. 4 and St. 5 in Gamak Bay where was most pollutant area. Finally, the third group was dominated by the polychaetes Heteromastus filiformis, Tharyx sp.3 and the amphipod Sinocorophium sinensis. Therefore, geochemical characteristics such as the bay shape and pollution gradient may be important factors controlling of the macrobenthic community structure in Environment Conservation Area.

• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.633-642
• /
• 2005

We present the sedimentary sequence and distribution pattern of the late Holocene muddy deposits in the northern East China Sea shelf using the high-resolution 'Chirp' profiles. The seismic sedimentary sequence overlying acoustic basement (basal reflector-B) can be divided into two depositional units (Unit 1 and 2) bounded by erosional bounding surface (mid reflector-M). The lower Unit 1 above basal reflector-H is characterized by the acoustically parallel to subparallel reflections and channel-fill facies. The upper Unit 2, up to 7 m in thickness, shows seismically semi-transparent seismic facies and lenticular body form. On the base of sequence stratigraphic concept, these two sediment units have developed during transgression and highstand period, respectively, since the last sea-level lowstand. The transgressive systems tract (Unit 1) lie directly on the sequence boundary (reflector B) that have farmed during the last glacial maximum. The transgressive systems tract in this study consists mostly of complex of delta, fluvial, and tidal deposits within the incised valley estuary system. The maximum flooding surface (reflector M) corresponding to the top surface of transgressive systems tract is obviously characterized by erosional depression. The highstand systems tract (Unit 2) above maximum flooding surface is made up of the mud patch filled with the erosional depression. The high-stand mud deposits showing a circle shape just like a typhoon symbol locates about 140 km off the south of Cheju Island with water depth of $60\~90m$. Coverage area and total sediment volume of the mud deposits are about $3,200km^2$ and $10.7\times10^9\;m^3$, respectively. The origin of the mud patch is interpreted as a result of accumulating suspended sediments derived from the paleo-Yellow and/or Yangtze Rivers. The circular distribution pattern of the mud patch appears to be largely controlled by the presence of cyclonic eddy in the northern East China Sea.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.2
• /
• pp.131-146
• /
• 2014

High-resolution seismic profiles coupled with sediment sampling were analyzed to investigate the acoustic characters and distribution patterns of the late Holocene sediments in Gamak Bay of the South Sea, Korea. The mean grain size of surficial sediment lies around $6.3{\sim}9.7{\Phi}$. Sediments in the bay consist of silt and clay with progressive decrease toward the inner bay. The seismic sedimentary sequence overlying the acoustic basement can be divided into two sedimentary units (GB I and II) by a prominent mid-reflector (Maximum Flooding Surface; MFS). The acoustic basement occurs at the depth between 20 m and 40 m below the sea-level and deepens gradually southward. The GB I, mostly occupying the channel-fill, is characterized by reflection-free seismic facies. It can be formed as late Transgressive System Tract (TST), interpreted tidal environment deposits. MFS appears at the depth of about 15~28 m below the sea-level and is well defined by even and continuous reflectors on the seismic profile. The GB II overlying MFS is composed of acoustically transparent to semitransparent and parallel internal reflectors. GB II is interpreted as the Highstand System Tract (HST) probably deposited during the last 6,000 yrs when the sea level was close to the present level. Especially, it is though that the GB II was subdivided into two layers (GB II-a and II-b) by a HST-reflector and this was classified by wind, sea water flux, and tidal current.

• Journal of Environmental Policy
• /
• v.8 no.2
• /
• pp.25-61
• /
• 2009

These days, environmental policies have changed from being command and control systems toward economic incentive systems, with various incentives having been established by OECD countries. In Korea, many environmental charges have been established in order to diminish activities which damage natural resources. Among them, the Ecosystem Conservation Cooperation Charge and the Replacement Charge for Forest Resources Creation are considered to be representative environmental charges. These charges, along with a few others, were designed to encourage efforts to protect natural resources. The charges include a number of different features, utilize varying methods, and altered ranges of jurisdiction. However, the charges may pose serious inequity problems in terms of their estimated values and their conditions of reduction and exemption. For instance, although the Ecosystem Conservation Cooperation Charge is a primary charge applied to natural resource damage, the charge does not fully secure its original objectives due to its low levy and limited range of provisions. Moreover, the Replacement Charge for Forest Resources Creation has been criticized because of similar reduction and exemption provisions. Therefore, this study analyzes the inequity problems associated with the charges and proposes solutions. First of all, the Ecosystem Conservation Cooperation Charge should be redesigned in such a way that it reflects the substantial value of natural resource damage through either abrogate or increased maximum limits of the charge. With regard to the Replacement Charge for Forest Resources Creation, the cases and ranges of reduction and exemption provisions should be narrowed. Finally, the charges collected should be expended in conformity with their original objectives, and their expenditure should be restricted to either restoration activities or activities directly related to compensation and mitigation of damaged natural resources.

• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.421-429
• /
• 2007

Some researchers suggested that tactile sensor system would be useful in evaluating masticatory muscles of TMD patients, but there were few studies on the effects of chewing with time. The aim of this study was to investigate the change of elasticity and stiffness for masseter and temporal muscles of normal subjects before, during and after gum chewing and to obtain the baseline data for further researches on the elasticity and stiffness for masticatory muscles of TMD patients. Stiffness and elasticity of their anterior temporalis and inferior masseter muscle were measured bilaterally by a tactile sensor system. Each subject was instructed to sit on a chair for evaluation of masticatory muscles. Before operating the sensor, the thickest skin area over anterior temporalis and inferior masseter muscles were selected as the points to be pressed by a tactile sensor, and marked with a pen. While the teeth of subjects were lightly contacted, the probe of the tactile sensor was placed perpendicularly over the marked point over the skin, followed by computer-controlled movement including gently pressing straight down on the muscle for a second and retracting. All subjects were instructed to chew gum (Excellent Breath, Taiyo Co., Japan) bilaterally with a velocity of 2 times per second for 40 minutes after the first measurement had been performed for the baseline data of all subjects. The measurements had been repeated during chewing with 10 minutes of interval and continued for 40 minutes with same interval after chewing. Resultantly, the decrease of elasticity and the increase of stiffness in masticatory muscles can be seen significantly within 10 minutes after chewing and those were maintained during chewing without significant change with chewing time. The elasticity of muscles was recovered within 10 minutes after stopping chewing, but the stiffness was recovered more lately than elasticity by about 10 minutes. Based on these results, it can be concluded that elasticity and stiffness of muscles would be good indicators to evaluate the masticatory muscles objectively, when more supported by further researches.

• Korean Journal of Ecology and Environment
• /
• v.33 no.3 s.91
• /
• pp.187-196
• /
• 2000

This paper describes a simple method that uses differences among Carlson's (1977) trophic state index (TSI) values based on total phosphorus (TP), chlorophyll a (CHL) and Secchi depth (SD) to draw inferences regarding the factors that are limiting to phytoplankton growth and the composition of lake seston. Examples are provided regarding seasonal and spatial patterns in a large subtropical lake (Lake Okeechobee, Florida, USA) and inter- and intra-lake variations from a multilake data set developed from published studies. Once an investigator has collected routine water quality data and established TSI values based on TP, CHL, and SD, a number of inferences can be made. Additional information can be provided where it also is possible to calculate a TSI based on total nitrogen (TN). Where TSI (CHL)<>TSI (SD), light attenuating particles are large (large filaments or colonies of algae), and the phytoplankton may be limited by zooplankton grazing. Other limiting conditions are inferred by different relationships between the TSI values. Results of this study indicate that the analysis is quite robust, and that it generally gives good agreement with conclusions based on more direct methods (e.g., nutrientaddition bioassays, zooplankton size data, zooplankton removal experiments). The TSI approach, when validated periodically with these more costly and time-intensive methods, provides an effective, low cost method for tracking long-term changes in pelagic structure and function with potential value in monitoring lake ecology and responses to management.

• Korean journal of food and cookery science
• /
• v.12 no.4
• /
• pp.499-505
• /
• 1996

The facillities for Kimchi preservation were investigated in order to develop the taste, flavor and commercial quality of Kimchi during fermentation. Four kinds of facillities used for this experiment were PP(Polypropylene). PSC(Polypropylene+ceramic)and PPP was selected newly and laminated of three layers with PETG (Polyester G), PS (Polystyrene) and PETG. The change of total number of lactic acid Bacteria, pH, acidity, color, gas contents and free internal volume of package were measured for the Kimchi packaged by 4 facillities during 6 days fermentation at 15$^{\circ}C$. The total No. of lactic acid Bacteria within the Kimchi in the PPP facillity was more and remained longer time (120 hrs.) than other Kimchi in the PP, PS and PPC facillities. Also the pH of all Kimchi were decreased to pH 4 within 72 hrs. and the pH of Kimchi in the PPP facillity was kept as pH 4 for 120 hrs., so that was shown to be decreased more dully than others. In case of fimchi in the PPP facillity, the color was retained better, CO$_2$ contents was lower similar to PPC facillity, and swelling degree of free internal volume was higher than others. By the sensory evaluation, the Kimchi in the PPP facillity represented as better than others for color, flavor, texture and total preferences until 48 hrs. fermentation. And the PPP facillity is transparent, so these will be selected and confirmed more easily, also PPP facillity is so hard to endure the swelling pressure of internal gas. Therefore it is thought that the PPP facillity used as Kimchi package will be desirable for better taste, flavor, and commercial quality.

• Development and Reproduction
• /
• v.12 no.2
• /
• pp.133-139
• /
• 2008

The eggs of Luciogobius grandis attached beneath the small stone were collected at Ocheon-dong, Yeosu-city from February to May, 2006. We carried them to the laboratory of Chonnam National University to investigate their development. The fertilized eggs were elliptical in shape (mean long axis: $2.06{\pm}0.23\;mm$; mean short axis: $0.74{\pm}0.04\;mm$) and transparent. There were filaments on the egg membrane. Their hatching was occurred at 120hrs 54mins after the morula stage at $18.4{\sim}21.0^{\circ}C$ (mean $19.4^{\circ}C$). The newly hatched larvae were $3.30{\pm}0.07\;mm$ (n=30) in total length (TL), with $34{\sim}36$ myotomes, and their mouth and auns were already open. Their melanophores were appeared over the gas globule, around the anus and a part of caudal peduncle. At 9 days after hatching, the larvae was $5.06{\pm}0.18\;mm$ (n=30) in TL and transformed to postlarval stage with yolk absorption. At 29 days after hatching, the larvae attained full fin ray count and reached the juvenile stage with $11.46{\pm}0.12\;mm$ (n=30) in TL.