• The Journal of the Korea Contents Association
• /
• v.9 no.7
• /
• pp.342-351
• /
• 2009

This study aims to determine if we can draw significant strategies for development and improvement of hotel wedding business by analyzing the future-going and consistent wedding & ceremony culture of superior hotels in Seoul. Though the study, I could make conclusions as follows; First, human service in hotel wedding services which can be roughly categorized into human service influence on positive or negative emotion reaction of the client directly. Second, positive or negative emotion reaction of the client for the hotel wedding service commodity result in positive or negative influence on the client's behavioral intention. I hope that there will be further studies from sampling to positive study on this issue in consideration of the conclusions and the limits of this study.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.457-467
• /
• 2015

Despite the recent phenomena of Chonsei price increase, low interest rate and low growth, the indexes of financial and insurance industry production showed the results contrary to the common belief that the financial industry is sensitive to such financial crises. This is because the index of financial industry has continuously maintained a certain level of increase as opposed to the index of all industry production. Thus, this study aimed to analyze the dynamic correlation between the index of financial industry production and Chonsei price increase. A vector autoregression (VAR) model, which doesn't have a cointegrating relationship, was used to define the Chonsei price index and the indexes of all industry production and financial and insurance industry, which are macro economic variables, and describe the data. The results of the analysis on the time series data of 183 months from January 2000 to May 2015 showed that Chonsei price increase was not directly derived from the index of financial industry, but the finance industrial index affected Chonsei price increase.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.226-233
• /
• 2012

In this paper, we propose a 'linear approximation method' which is an accelerated BER (Bit Error Rate) test method for high speed interfaces, based on an analytical BER model. Both the conventional 'Q-factor estimation method' and 'linear approximation method' can predict a timing margin for $10^{-13}$ BER with an error of about 0.03UI. This linear approximation method is implemented on a hardware as an accelerated Built-In Self Test (BIST) with an internal BERT (BET Tester). While a direct measurement of a timing margin in a 3Gbps interface takes about 5.6 hours with $10^{-13}$ BER requirement and 95% confidence level, the accelerated BIST estimates a timing margin within 0.6 second without a considerable loss of accuracy. The test results show that the error between the estimated timing margin and the timing margin from an actual measurement using the internal BERT is less than 0.045UI.

• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.55-63
• /
• 2005

Direct Georeferencing(DG) Is based on the direct measurement of the projection centers and rotation angle of sensor through loading the GPS and INS in aircraft. The methods can offer us to acquire the exterior orientation parameters with only minimum GCPs, even the ground control process could be completely skipped. Hence, as long as securing Digital Elevation Model (DEM), it is feasible to generate digital orthophotos without performing the aerial triangulation with Ground Control Point (GCP) surveying. In this study, the DEM is automatically generated by using a image matching technique based on aerial photos and exterior orientation parameters. This is followed by producing an orthophoto from these results. Finally, accuracy analysis of the georeferencing technique for generating orthoimage indicates that RMS errors of 62cm and 76cm occurred at the X and the Y axis, respectively. This means that the results fulfill the demanding accuracy of the 1:5000 digital map. Hence, it is possible to conclude from this study that the direct georeferencing based orthoimage generation method is able to effectively digital map update.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.991-998
• /
• 2016

The propose of this study is to demonstrate how efficiently and accurately the construction stages of cable-stayed bridges are analyzed using the unstrained length method (ULM) in which all unstrained element lengths are determined from a simplified analytical method (Jung et al., 2015). A forward analysis of cable-stayed bridges using the commercial FEA program, MIDAS is sequentially carried out considering the lack of fit force but the ULM is able to analyze a intermediate construction stage directly by taking the corresponding unstrained lengths of the construction stage model simply. The closing load step analysis is achieved by loading the pavement and counter weight forces in reverse. An Incheon bridge model is analyzed using the present ULM and the commercial program, respectively, and the two analysis results are compared.

• Korean Journal of Cognitive Science
• /
• v.18 no.3
• /
• pp.223-244
• /
• 2007

Two well known mis-localization effects, flash-lag effect (FLE) and the Pulfrich effect, have similar phenomena and theoretical explanations. In order to directly compare two phenomena, thereby examining the possibility that two phenomena have a common mechanism, the magnitudes of two effects were measured under the same experimental settings and stimuli. The Pulfrich depth was measured from each of four different brightness ratios of two moving stimuli, each of which was projected to each eye. The magnitude of FLE was measured from each of five different brightness levels, which were the same levels used in the Pulfrich experiment. The Pulfrich depth was increased with the increase of brightness ratio, whereas similar pattern was not found in the magnitude of FLE. Furthermore, actual Pulfrich depths were greatly different from those predicted from the difference of two FLEs. These results suggest that two phenomena may not have a common mechanism.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.581-593
• /
• 1990

A semi-solid alloy in which solid and liquid phase are co-existing is obtained by strirring of Al7075 molten metal. A semi-solid alloy is dependent on the corresponding temperature within the solid-liquid range, and the process parameters should be controlled accurately to obtain the homogeneous semi-solid alloy. The possibility o homogeneous fiber-reinforce aluminum alloy by addition of $Al_{2}$O$_{3}$ short fibers with vigorous agitation was investigated. The billet of composite materials was fabricated by squeeze casting, and homogeneous dipersion state of fibers in billet of fabricated metal matrix composites was observed. A slurry of semi-solid short fiber metal matrix composites is used in the direct rolling process, and this process showed the fabrication possibility of metal matrix composite sheets. The fabricated sheet was tested regarding vickers hardness, elongation and micro-structure. It has become clear that mashy state processing and working are very useful to obtain parts of composites material closed to near net shape.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.10-14
• /
• 2016

육상의 증발산량(evapotranspiration, ET)은 대기 중 수증기의 상변화를 통해 대기와 지표 사이의 물과 에너지 순환에 영향을 미치며, 강수량, 유출량과 함께 수자원에 영향을 미치는 주요 인자이다. 강수량과 유출량은 직접 관측이 가능한 반면, 증발산량은 숨어있는 잠열로서 관측하기 어렵다. 플럭스 타워나 라이지메타(Lysimeter) 등을 이용하여 증발산량을 직접 관측하고 있으나 이들 지상관측은 일부 지점(point)에서 제한적으로 이루어지고 있으며, 관측 지점의 수를 확대하게되면 관측 기기의 유지 보수 등의 많은 시간과 비용이 든다는 한계가 있다. 이러한 지상관측의 한계를 극복하고 넓은 영역의 증발산량 변화를 관측하기 위해 위성을 이용한 증발산량을 추정하는 연구가 활발히 진행되고 있다. 기상청 국가기상위성센터(National Meteorological Satellite Center, NMSC)에서는 우리나라 최초의 정지 기상 위성인 천리안 위성(Communication, Ocean and Meteorological Satellite, COMS) 자료를 지표 에너지 수지식(Surface Energy Budget Equation)에 적용하여 동아시아 지역의 지면과 식생 특성을 반영한 '일(daily) 증발산량 산출 알고리즘'을 개발하였다. 현열을 계산하기 위해 다양한 입력 변수가 사용되어지고 계산 과정이 복잡하기 때문에, 본 연구에서는 '반 경험적인 계수인 B 계수 모델'을 사용하여 현열 산출 기법을 단순화하였다. 본 알고리즘을 이용하여 2011년 4월부터 현재까지 동아시아(위도 $20{\sim}50^{\circ}N$, 경도 $100{\sim}145^{\circ}E$)의 해상도 1km의 일 증발산량을 산출하였고, 위성 증발산량의 검증을 위해 지면 특성이 다른 청미천(농경지), 설마천(혼효림) 지역의 플럭스 타워 증발산량 자료(유량조사사업단 제공)와 비교 분석하였다. 2011년 4월부터 2014년 12월까지 청미천 지역에서의 플럭스 타워 관측과 비교한 결과, 총 665개 자료에 대하여 RMSE는 2.82 mm/day, Bias는 2.56 mm/day의 결과를 보였다. 동일한 기간에 대하여 설마천 지역에서의 플럭스 타워 관측과 비교한 결과, 총 582개 자료에 대하여 RMSE는 1.92 mm/day, Bias는 1.45 mm/day의 결과를 보였다. 기상청 국가기상위성센터의 위성증발산량이 봄과 가을철에 다소 높게 산출되는 경향이 있었으나, 증발산량의 변화경향은 유사하게 나타났다. 이러한 결과를 바탕으로 동아시아 지역 위성 증발산량 변화를 감시하고 있으며 향후, 수문 및 기후 분야에서 가뭄 모니터링 등의 연구에도 활용할 수 있을 것이다.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.2
• /
• pp.83-93
• /
• 2019

Responding to the prior studies' call for further investigating the relationship between entrepreneurial orientation and firm performance, this study proposes a partially mediated model of entrepreneurial orientation, entrepreneurial knowledge position, and firm performance. Survey responses from 3,324 small- and medium-enterprises in South Korea are analyzed to identify a partially mediating role of an organization's entrepreneurial knowledge position. A firm's innovativeness both directly affects its innovation performance and knowledge position in positive ways. On the other hand, risk-taking firms only positively affects knowledge position, whereas a firm's proactiveness positively affects its performance while negatively affecting its entrepreneurial knowledge position. Neither autonomy nor competitiveness show any statistically significant relationships to either entrepreneurial knowledge position or firm performance. A firm's knowledge position is strongly and positively related to its performance. The findings of this study contributes to the research stream of entrepreneurial orientation by delineating the partially mediating role of a firm's knowledge position.

• Journal of the Korea Computer Graphics Society
• /
• v.16 no.1
• /
• pp.9-20
• /
• 2010

In order to visualize participating media in 3D space, they usually calculate the incoming radiance by subdividing the ray path into small subintervals, and accumulating their respective light energy due to direct illumination, scattering, absorption, and emission. Among these light phenomena, scattering behaves in very complicated manner in 3D space, often requiring a great deal of simulation efforts. To effectively simulate the light scattering effect, several approximation techniques have been proposed. Volume photon mapping takes a simple approach where the light scattering phenomenon is represented in volume photon map through a stochastic simulation, and the stored information is explored in the rendering stage. While effective, this method has a problem that the number of necessary photons increases very fast when a higher variance reduction is needed. In an attempt to resolve such problem, we propose a different approach for rendering particle-based volume data where kernel smoothing, one of several density estimation methods, is explored to represent and reconstruct the light in-scattering effect. The effectiveness of the presented technique is demonstrated with several examples of volume data.