• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.74-80
• /
• 2005

To use the filter materials for reduction of carbonyl compounds in cigarette mainstream smoke, the bead type cation and anion exchangers were synthesized by the suspension polymerization of GMA and DVB followed by the subsequent functionalization with sodium sulfite and diethylamine, respectively. FT-IR/ATR was used to characterize functionalized copolymer formation by sulfonation and amination, and the morphology change of ion exchangers according to the adsorption of cigarette mainstream smoke were observed by SEM. Ion exchange capacity, functionalization yield and adsorption properties of carbonyl compounds in cigarette mainstream smoke were investigated. The highest functionalization yields and ion exchange capacity were obtained at 5 wt% DVB content in co-monomer. The adsorption amount of carbonyl compounds in cigarette mainstream smoke of anion exchanger was higher than that of cation exchanger because of its electron delocalization in carbonyl group. The adsorption efficiency was increased in the presence of moisture. This results indicated that the anion exchanger was applicable for cigarette filter material because of its large ion exchange capacity and rapid ion exchange reaction.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.137-138
• /
• 2011

본 연구에서는 Mehrabian과 Russell (1974)의 S-O-R모델을 바탕으로 연구범위를 확장하여 점포이미지와 쇼핑가치를 포함한 연구모형을 설계하였다. 연구모형을 토대로 대형유통시설의 점포 관련 다양한 이미지를 선행자극요인으로 선정하고, 소비자들이 쇼핑하면서 경험하는 감정요인을 반응요인으로 설정하여 이들 변수들이 소비자의 행동의도에 미치는 영향을 파악하는데 주된 목적이 있다. 또한 이들 자극-반응 변수간의 관계에 쇼핑가치를 도입하여 조절효과를 검증하고자 한다. 본 연구는 연구범위를 확장하여 국가 간 비교 및 선행연구들이 간과하고 있는 부분에 대한 이론적, 실증적 접근을 시도하고 있다는데서 그 의미를 찾을 수 있다. 본 연구의 결과는 이론적인 측면은 물론 실무적인 측면에서도 본격적인 해외시장개척을 하는 한국유통기업의 해외마케팅전략 수립에 활용할 수 있는 유익한 시사점을 제공해 줄 수 있을 것이다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.670-672
• /
• 2023

본 논문에서는 소셜 미디어 약물 리뷰 데이터로부터 약물 이상 반응을 탐지하는 모델인 FC-BERT 를 기반으로 소셜 네트워크 분석을 활용하여 웹 애플리케이션을 구현하였다. FC-BERT 모델을 거쳐 나온 개체명 인식 결과 중에 같은 의미를 가진 서로 다른 약물 이상 반응 표현들을 MedDRA 부작용 사전을 참고하여 하나의 MedDRA 용어로 표준화하여 매핑했다. 해당 결과에 소셜 네트워크 분석 기법을 적용하여 생성한 상위 15 개의 ADR 동시 출현 그래프를 상위 30 개의 워드 클라우드와 함께 시각화하여 보여주는 웹 애플리케이션을 개발했다. 동시 출현 그래프는 가장 많은 리뷰에서 동시에 나타나는 ADR 쌍을 보여준다. 본 논문에서 제안한 웹 애플리케이션은 사람마다 다르게 나타나는 다양한 약물 이상 반응을 사용자에게 좀 더 접근성이 좋게 제공할 수 있을 것으로 보인다.

• Korean Journal of Acupuncture
• /
• v.37 no.4
• /
• pp.253-261
• /
• 2020

Objectives : This study aimed to evaluate adverse outcome associated with acupotomy and compare it with that of acupuncture. Methods : We retrospectively analyzed the chart records of 71 patients who received acupotomy at Daemyung Korean medical clinic from January 7, 2020 to March 6, 2020. We divided the acupotomy treatment area into 10, including the head, hand, chest, knees, shoulders, low back, neck, upper extremities, thighs, and feet. Furthermore, we investigated the adverse effect of acupotomy on those areas after treatment. Data were analyzed using descriptive statistics, and frequency analysis. Results : 'Bruise of specific region' accounted for the largest portion with 29 cases, followed by 24 cases of 'feeling tired and sleepy' and 17 cases of 'itch'. There were 16 cases of 'sustained pain' at the area of treatment, 11 cases of 'fatigue', 5 cases of 'swelling', 5 cases of 'dizziness', 4 cases of 'hematoma'. There were 3 cases of 'vertigo' and 2 cases of 'parathesia' and 'wide bruises', 'headache', 'gastric discomfort', 'bleeding', and 'skin rash' each. There was one case each that experienced 'unclear pronunciation', 'nausea', 'abnormal sweating', 'vomiting' and 'emotional/psychological reactions'. Conclusions : Adverse outcomes associated with acupotomy were mostly 'bruise of specific region', 'feeling tired and sleepy', 'itch', 'sustatained pain', and 'fatigue'. However, no adverse outcome or irreversible damage that have a serious effect on the body were observed.

• Journal of the Korean Magnetics Society
• /
• v.13 no.1
• /
• pp.6-14
• /
• 2003

The purpose of this study is to investigate the effect of chemical reaction with a bonding glass on physical and magnetic properties of Fe-Hf-N/SiO$_2$ and Fe-Hf-N/Cr/SiO$_2$ thin films. When the Fe-Hf-N/SiO$_2$ films were reacted with the bonding glass, the soft magnetic properties of them were extremely degraded. At $600^{\circ}C$, the saturation magnetization of the reacted film decreased to 1 kG, and its coercivity increased to 27 Oe, and its effective permeability decreased to 70. It was found that the degradation of soft magnetic properties of the Fe-Hf-N/SiO$_2$ films reacted with the bonding glass were attributed to the oxidation of the Fe-Hf-N layers to HfO$_2$ and Fe$_3$O$_4$. The soft magnetic properties of the Fe-Hf-N/Cr/SiO$_2$ films reacted with the bonding glass were degraded less than those of Fe-Hf-N/SiO$_2$ films. At $600^{\circ}C$, the saturation magnetization of the reacted film decreased to 13.5 kG, and its coercivity increased to 4 Oe, and its effective permeability decreased to 700. It was found that the Cr layer suppressed the oxidation of the Fe-Hf-N layers during the chemical reaction between the Fe-Hf-N layer and bonding glass.

• Clean Technology
• /
• v.26 no.4
• /
• pp.329-335
• /
• 2020

Methanol synthesized from renewable hydrogen and captured CO2 has recently attracted great interest as a sustainable energy carrier for large-scale renewable energy storage. In this study, molten carbonate fuel cell's performance was investigated with the direct conversion of methanol into syngas inside the anode chamber of the cell. The internal reforming of methanol may significantly improve system efficiency since the heat generated from the electrochemical reaction can be used directly for the endothermic reforming reaction. The porous Ni-10 wt%Cr anode was sufficient for the methanol steam reforming reaction under the fuel cell operating condition. The direct supply of methanol into the anode chamber resulted in somewhat lower cell performance, especially at high current density. Recycling of the product gas into the anode gas inlet significantly improved the cell performance. The analysis based on material balance revealed that, with increasing current density and gas recycling ratio, the methanol steam reforming reaction rate likewise increased. A methanol conversion more significant than 90% was achieved with gas recycling. The results showed the feasibility of electricity and syngas co-production using the molten carbonate fuel cell. Further research is needed to optimize the fuel cell operating conditions for simultaneous production of electricity and syngas, considering both material and energy balances in the fuel cell.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.164-170
• /
• 2001

The Self-propagating High-temperature Synthesis (SHS) for synthesizing ($Mo_{1-z}$ , $W_{z}$)$Si_2$was conducted experimentally with the mole fraction of Tungsten(W) from z=0.0 to z=0.5. The temperature profile was measured according to the reaction time through the thermocouple that was equipped into the center of these samples. When the reaction front is propagated around the thermocouple, the highest temperature appears and we regard this temperature as the adiabatic temperature. We found out by experimental results that the reaction velocity is in the range of 2.14~1.35mm/sec and the adiabatic temperature is in the range of 1883~1507K for the six samples. The reaction velocity and the adiabatic temperature were inclined to decrease with an increasing of the mole fraction of Tungsten (W). The SHS modeling is presented in order to predict the temperature profiles and these results are compared with the experimental results. It is predicted that in case of increasing the initial temperature of these six samples, the reaction temperature increased and that the sample of z=0.5 needs the preheating up to 800~900K in order to become reaction temperature 1900K.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2011.05a
• /
• pp.99-100
• /
• 2011

• Journal of the Korean Chemical Society
• /
• v.40 no.8
• /
• pp.34-585
• /
• 1996

• Journal of Periodontal and Implant Science
• /
• v.19 no.2
• /
• pp.138.2-138.2
• /
• 1989