• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.261-262
• /
• 2009

The prevent methods of Alkali-Silica Reaction (ASR) are studying after the failure cases by ASR were reported in Korea. In this study, the freeze-thaw test and scaling test for premixed fly ash cement were performed. The ratio of fly ash and cement is 20 percent and 80 percent by weight of total cementious material. The results show that the dynamic modulus after 300 cycles the freeze-thaw test for most of specimen except the specimen have less 3% air was more than 90 % and the loss of weigh the specimen after 50 cycles scaling test was less than 1kg/$m^3$.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.789-792
• /
• 2008

Blast furnace slag doesn't have self-hydraulicity and it needs stimulants such as alkali to hydrate. Therefore using recycled aggregates erupted calcium hydroxides and blast furnace slag acquiring alkali stimulate could make a complementarily use of a recycling architectural material possible. In this study, we have discussed about characters of blast furnace slag and recycled aggregate firstly, and make recycled aggregate mortar and concrete using blast furnace slag for the experiment. The experiment is about mortar and concrete using recycled aggregate as a substitutional material of blast furnace slag. In this experiment, I replace blast furnace slag and aggregate with recycled aggregate. Conclusions through the test results analysis are as follows. And then, we added field experiment using concrete with composited materials.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.2
• /
• pp.108-117
• /
• 1994

This study was performed to investigate the Alkali-Silica Reaction(ASR) of crushed stones using chemical analysis, polarization microscope, XRD, chemical method(KS F 2545, ASTM C 289), mortar-bar method( KS F 2546, ASTM C 227) and Scanning Electron Microscope (SEM ) and Energy Dispersive X-ray Analysis(EDXA) of reaction products by ASK in the mortar bars and to investigate the influence on alkali content and kind of added alkali to the ASR. Test results show that one kind of domestic crushed stone is estimated as deleterious by ASTM chemical method and mortar bar method, and reaction product is proved as alkali silicate gel by EDXA.

• 레미콘
• /
• no.10 s.45
• /
• pp.37-43
• /
• 1995

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.1-6
• /
• 2011

The possibility of ASR(alkali-silica reaction) for coarse aggregates had known to be low up to recently in Korea. But the distress of ASR was identified and reported by ASTM C 1260 test. The purpose of this paper was to identify the effect of environmental conditions on length expansion of mortar-bar by alkali-silica reaction with KS F 2546 and ASTM C 1260 test. The results of this study were as following; The result of KS F 2546 test for five kinds of aggregates shows that all of them are non-reactive. But that of ASTM C 1260 test shows that all of aggregates except Andesite-2 are over possible reactive because of environmental condition such as external alkali ion by 1N NaOH, high temperature and humidity. The result of variety of NaOH concentration on ASTM C 1260 using Siltstone indicates that length expansion rate increases highly as NaOH concentration increases. And, comparison results of KS F 2546 for Siltstone with that of 0.00N NaOH experiment indicates that length expansion rate increases as temperature and humidity increases.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.4
• /
• pp.183-193
• /
• 1998

This study was designed, firstly, to determine the mineralogical and chemical characteristics of some rock aggregates, secondly, to offer interrelationships between those and mechanical properties, and thirdly, to evaluate their suitability for concrete aggregates. Mineralogical, chemical, physical and mechanical characteristics of the studied rock aggregates indicate that granite from BJ quarry and banded gneisses from KB. HI and SK quarry, and quartzite from the Hongcheon riverside are not proper to cement concrete aggregates because of quartz's potential possibility of alkali-silica reaction, and limestone in SY quarry is proper to asphalt concrete aggregates owing to dolomite causing alkali-carbonate reaction. Augen gneiss and diorite from KB and SA quarry, respectively, are to be not suitable for concrete aggregates because of biotite contents, but augen gneiss in HI quarry and gneisses in Hongcheon riverside are proper to concrete aggregates because of mineralogical and mechanical characteristics.

• 한국도로학회:학술대회논문집
• /
• 2005.11a
• /
• pp.251-254
• /
• 2005

• Cement Symposium
• /
• no.21
• /
• pp.102-107
• /
• 1993

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.249-254
• /
• 2002

In Korea, due to the shortcomings of natural aggregates and increasing needs of crushed stones, it is necessary to examine the alkali-aggregate reaction of the crushed stones. The purpose of this study is to analyze petrographic properties and alkali-aggregate reaction of crushed stones This study was peformed to investigate the alkali-aggregate reaction of crushed stones using chemical analysis, physical properties, XRD, XRF and mortar-bar method.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.345-352
• /
• 2017

Heavy weight concrete can be used in marine concrete structure to improve resistance against high wave energy. However, heavy weight aggregate, which is an indispensable material for heavy weight concrete, is difficult to be supplied in large quantities because its use is limited due to its high cost. In this work, the applicability of heavy weight by-products, copper and 3 month aged steelmaking slags, were evaluated as sources of heavy weight aggregate for marine concrete structures. Experimental results showed that copper slag was found to be a stable material for marine concrete structure. However, 3 month aged steelmaking slag showed significant expansion by $80^{\circ}$ water immersion test and ASTM C 1260 test. In addition, depth of chloride ion penetration in concrete was higher at which steelmaking slags were located. It was associated with porosity of steelmaking slag, and for this reason, steelmaking slag was not found to be suitable for marine concrete structure.