• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.205-205
• /
• 2022

본 연구에서는 심해 선형파 조건에서 수중 투과성 방파제 주변의 유속장에 대해 nonhomogeneous Riemann-Hilbert problem을 이용한 해석해 및 수치해를 도출하고, 이를 반사계수와 투과계수를 산정하는 데에 활용한다. 여러 개의 얇은 투과성 판이 일렬로 배열되어 수중에 고정되어있고 규칙파가 작용하는 경우, Riemann-Hilbert problem을 정의할 수 있다. 본 연구에서는 얇은 판으로 이루어진 수중 방파제에 대한 homogeneous Riemann-Hilbert problem을 푸는 것을 넘어, 투과성 판으로 이루어진 수중 방파제에 대해 nonhomogeneous Riemann-Hilbert problem을 정의하고, 이에 대해 무한경계조건과 판 근처에서의 유속장 경계조건을 이용해 해석해를 유도하였다. 투과성 방파제의 경우 permeable boundary를 가지므로 제시한 상황은 기하학적 비선형성을 지닌다. 이에 대해 투수성을 기초로 미소 매개변수를 정의하고, 섭동법(perturbation method)을 이용해 유속장에 대한 leading order solution과 first order solution을 도출하였다. Leading order solution은 Evans (1970) 등의 선행연구에서 제시한 해와의 비교를 통해 그 타당성을 검증하였고, First order solution을 이용해 반사계수와 투과계수를 산정하여 방파제의 투수성이 유속장에 미치는 영향을 고려하였다. 아울러 수치해를 도출하여 해석해의 결과와 비교 및 분석하였다. 본 연구에서 제시한 해석해는 방파제에 가해지는 힘을 산정하는 등 다양한 방향으로 활용 가능하며, 향후 수치해나 실험값을 비교, 검증하기 위한 기초 자료로써 활용될 수 있다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.1
• /
• pp.25-33
• /
• 2008

Water waves are generated mainly by winds in open seas and large lakes. They carry a significant amount of energy from winds into near-shore region. Thereby they significantly contribute to the regional hydrodynamics and transport process, producing strong physical, geological and environmental impact on coastal environment and on human activities in the coastal area. Furthermore an accurate prediction of the hydrodynamic effects due to wave interaction with offshore structures is a necessary requirement in the design, protection and operation of such structures. In the present paper surface and internal waves scattering by thin surface-piercing and bottom-standing vertical barriers in a two-layer fluid is analyzed in two-dimensions within the context of linearized theory of water waves. The reflection coefficients for surface and internal waves are computed and analyzed in various cases. It is found that wave reflection is strongly dependent on the interface location and the fluid density ratio apart from the barrier geometry.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.403-408
• /
• 2019

In general, the caisson having the perforated wall is used to for the purpose of reducing the wave reflection and wave overtopping. In this study, the hydraulic characteristics (reflection coefficient) of the perforated wall caisson chamber filled with aggregates (rocks) were investigated with hydraulic model tests. When the perforated wall chambers were filled with aggregates, the reflection coefficients would increase. However, it was confirmed that the rock filling method into the perforated wall chamber could secure the stability of the structures and satisfy the hydraulic characteristics at a certain level.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.6
• /
• pp.40-47
• /
• 1995

A system for measurement of ultrasonic velocity, attenuation and complex modulus of materials by using the spectral analysis method of pulses has been constructed and its performances are estimated. The system has a mechanical scanning part of an acoustic microscope with a ZnO plane wave transducer of the resonant frequency of 85MHz. Ultrasonic velocity has been obtained by the intervals of maxima (or minima) on the power spectrum of a pulse train reflected from the surface and bottom of a specimen, and attenuation has been obtained by the power spectra of three pulses reflected from the surface and the bottom of a specimen and the surface of a standard specimen. The measured results for materials such as fused quartz, polyester show that the system has very high accuracy.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.2
• /
• pp.54-63
• /
• 1981

An ultrasonic imaging system with fan reflection mode time of fight is developed and its performance has been examined by system implementation. Experimental results obtained indicafe potential of the method for tomographic imaging. The basic concept of this method is reconstruction of reflectivity with reflection data collected in fan mode using a new "arbitrary ray" reconstruction algorithm. Computer simulations as well as experimental results are presented.presented.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.1
• /
• pp.29-37
• /
• 2007

In this study, transmission and reflection of multi-directional random waves propagating over impermeable submerged breakwaters are calculated by using eigenfunction expansion method. A series of mutiderectional random waves is generated by using the Bretschneider-Mitsuyasu frequency and Mitsuyasu type directional spectrum. Strong reflection is occurred at the Bragg reflection condition of the peak frequency. If the row of breakwaters is fixed at 3 and the relative height of breakwater is fixed at 0.6, more than 25% of incident wave energy is reflected to offshore. It is also found that the reflection of directionally spreading random waves increases as the maximum spreading parameter $s_{max}$ increases.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.11
• /
• pp.1217-1227
• /
• 2012

There are several antenna calibration methods, so-called 3-Antenna Method, Standard Site Method, and Standard Antenna Method which measure the antenna gains or antenna factors. These methods yield the free space or quasi free space antenna gains in only the frequency domain. In this paper, an antenna calibration method using the time domain in the open area test site is discussed. The reflected waves due to the ground are traced in the time domain. After they are removed by the time gating function of network analyzer, the free space transmission coefficient $S_{21}$ is extracted. Such a way is applied to the broad band horn antenna ranging 1 GHz to 18 GHz, and the free space gains are obtained by Friis transmission equation. The method is checked by Standard Site Method in open area test site. The results show comparatively good agreement except for 18 GHz.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.1
• /
• pp.38-44
• /
• 2007

Using the mathematical model suggested by Bennet et al.(1992), the reflection and transmission coefficients by a circular pile breakwater has been investigated in the framework of potential theory. Flow separation due to sudden contraction and expansion is generated and is the main cause of significant energy loss. Therefore, evaluation of exact energy loss coefficient is critical to enhance the reliability of mathematical model. To obtain the energy loss coefficient, 2-dimensional turbulent flow is analyzed using the FLUENT commercial code. The energy loss coefficient can be obtained from the pressure difference between upstream and downstream. Energy loss coefficient is the function of porosity and the relation equation between them is suggested throughout the curve fitting processing. To validated the suggested relation, comparison between the analytical results and the experimental results is made for four different porosities with good agreement.

• Geophysics and Geophysical Exploration
• /
• v.19 no.2
• /
• pp.76-83
• /
• 2016

Migration image can be distorted due to reflected waves in the source and receiver wavefields when discontinuities of input velocity model exist in seismic imaging. To remove reflected waves coming from layer interfaces, it is a common practice to smooth the velocity model for migration. If the velocity model is smoothed, however, the subsurface image can be distorted because the velocity changes around interfaces. In this paper, we attempt to minimize the distortion by reducing reflection energy in the source and receiver wavefields through acoustic impedance homogenization. To make acoustic impedance constant, we define fake density model and use it for migration. When the acoustic impedance is constant over all layers, the reflection coefficient at normal incidence becomes zero and the minimized reflection energy results in the improvement of migration result. To verify our algorithm, we implement the reverse-time migration using cell-based finite-difference method. Through numerical examples, we can note that the migration image is improved at the layer interfaces with high velocity contrast, and it shows the marked improvement particularly in the shallow part.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.633-639
• /
• 2006

The validity of the existing formulas for the estimation of reflection coefficient of waves due to perforated wall is investigated using the result of hydraulic experiments conducted with perforated walls of various thickness. The result shows that, when the wall is thick, the energy loss coefficient is reduced to 62% of the value evaluated using the existing formula for sharp-crested orifice. The result also shows that the length of inertia resistance increases linearly as the thickness of the wall increases. The width of chamber to achieve the minimum reflection of waves decreases as the length of inertia resistance increases. Thus, the result found in the present study can be usful for the design of perforated wall.