• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.385-392
• /
• 2001

Time-dependent frequency and energy of free vibration of the Spagetti problem, that is the axially moving continuum with time-varying length, are investigated. Exact expressions for the natural frequency and time-varying vibration energy are derived by dealing with traveling waves. When the string length is increased, the vibration period increases, but the free vibration energy varies as a function of both translating velocity and boundary velocity of the continuum. However, when the string undergoes retraction, the vibration energy increases with time, String tension together with non-zero instantaneous velocity at the moving boundary results in energy variation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.170-173
• /
• 2005

The objective of this paper is to perform measurements of power transmission and reflection coefficients in a coupled plate. The coupled plate has been divided into 2 subsystems. The out-of-plane vibration has been only considered with assumption of relatively small in-plane vibration. The coupling loss factors have been measured with consideration of the power balance condition. The power transmission and reflection coefficients has been estimated from the measured values of the coupling loss factors. The measured power transmission and reflection coefficients have been compared with the corresponding theoretical coefficients in a semi-infinite coupled plate.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1203-1209
• /
• 2001

Identification of noise sources, their locations and strengths, have been taken great attention. The method that can identify noise sources normally assumes that noise sources are located at a free field. However, the sound in a reverberant field consists of that coming directly from the source plus sound reflected or scattered by the walls or objects in the field. In contrast to the exterior sound field, reflections are added to sound field. Therefore, we have to consider the reverberation effect on the source identification method. The main objective of this paper is to identify noise source in the reverberant field. At fist, we try to identify noise sources in a rigid wall enclosure using the spherical beamforming method. In many case of practical interest, the wall has an admittance so that complex reflection process occurred. In this paper, we assumed the complex reverberant field in the enclosure to be the sum of plane waves with random incidence and magnitude. Then the effects of reverberant field at interior source identification have been studied theoretically as well as experimentally

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.353.2-353
• /
• 2002

The attenuation of waves transmitted through non-conservative joints that are shown in many practical structures, is affected by the impedance and the orientation of the joint. In this paper, the joints between plate structures are assumed to be modeled as linear spring-dashpot systems and the transmission and reflection of vibration energy in the medium to high frequency ranges are investigated. (omitted)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.928-933
• /
• 2008

본 연구에서는 최적 빔포머 (optimal beamformer)를 이용하여, 높은 지향특성을 갖는 라우드스피커 어레이를 구성하였다. 센서 어레이 시스템에 널리 적용되는 빔포밍 방법은 상반성 (reciprocity)의 원리에 의하여 라우드스피커 시스템에도 적용이 가능하다. 음원의 개수 및 배치 간격과 같은 최적 빔포머의 설계 변수와 지향성과의 관계를 살펴보고, 잡음 증폭을 억제하기 위해 적용되는 안정화 계수 (stability factor)도 유용한 설계 변수로 활용하였다. 또한 라우드스피커 자체가 갖는 지향성과 반사와 산란 등을 고려하여 빔포머를 최적화하는 방법을 제안하였고, 이 방법을 통해 예측치와 실제 시스템과의 차이를 줄였다. 실행 예제로 실제 어레이 시스템을 구성하고, 모의 실험과 실제 측정을 수행하여 성능을 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.6
• /
• pp.53-61
• /
• 1990

Real-time implementations of the active adaptive noise controller are proposed and tested. There are three problems in active noise control such as real-time processing, an acoustic feedback of secondary signal and a time-delay of control system elements. For real-time processing, the DSP56001 was used. To avoid acoustic feedback, the secondary signal was excluded from prediction. And for compensation of time delay, the ahead prediction was applied. As the primary noise is reflected in space, the reflected noise should be controlled for perfect noise control. But in this case, the controller might be unstable. For solving the problem, it is proposed that the source noise and the reflected noise are predicted separately. Some experimental results show the stability and effectiveness of the proposed controller.

• Journal of KSNVE
• /
• v.6 no.2
• /
• pp.245-251
• /
• 1996

This study is to suggest the improved noise barrier which is harmonized with surrounding landscape and maintained the similar reduction of reflected sound and diffraction effects in comparison with the aluminum noise barrier of absorbing type which is formed a great majority in Korea. In this study the two improved models of noise barrier(Diffuse and Disperse type) were designed and compared with the noise barriers of absorbing type in the acoustics performance (the reduction of reflected sound and diffraction effects) through the field and full-scale experimental measurement. As these two models have the same acoustic performance as the noise barrier of aluminum absorbing type, it is suggested that these models can be applied to the improved noise barrier as an alteration of aluminum absorbing type barrier.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.388-393
• /
• 2012

Acoustic brightness and contrast control are promising techniques for manipulating acoustic energy over selected zones of interest using loudspeaker arrays. In this paper, the fundamental theory and concept of the brightness and contrast control is reviewed. The similarity and difference of two different strategies are explained in terms of the constraint required to determine a unique solution among many possible candidates. The application examples and recent progresses of the brightness and contrast control are presented.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.9
• /
• pp.856-862
• /
• 2010

In this paper, the power flow analysis(PFA) method was developed to predict the vibrational responses of coupled co-planar orthotropic plates in frequencies ranging from medium to high. To cover the power transmission and reflection at the joint of the orthotropic plates, the wave transmission approach is applied with the assumption that all the incident waves are normal to the joint. Through numerical analyses, the power flow energy density and intensity fields of coupled co-planar orthotropic plates were compared with those of classical modal solutions by changing the frequency and internal loss factor, and they show good agreement in terms of the global decay and the attenuation patterns of the energy density.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.768-768
• /
• 2011

선박/잠수함에 설치하는 소나(sonar)는 외부 해양 환경 및 유체 흐름을 위해 소나 돔을 설치하여 운용한다. 하지만 소나 돔 설치로 인해 핵심 기능인 음향신호 송/수신 기능 저하를 야기 시킨다. 따라서 소나돔을 설계시, 구조적으로는 수중 폭팔 등의 각종 하중으로부터 센서를 보호할 수 있도록 설계하고 음향적으로는 음파의 송수신 신호를 저하시키지 않는 재질을 고려하여 설계 및 제작을 하여야 한다. 소나돔에 의한 음향 손실을 최소화하기 위하여 설계 시, 소나돔음향창 시편을 통하여 음향신호가 이를 투과하면서 생기는 신호 왜곡 혹은 투과 손실 측정을 수행한다. 제한된 크기의 수조 시험장에서 투과 손실이 측정이 되는데, 음원 반사, 회절(diffraction) 등의 문제로 인하여 다양한 주파수 대역에서의 측정이 불가피 하다. 이때, 좁은 빔폭 (Beamwidth)을 갖는 Parametric array를 이용하여 음원 회절이 생기지 않는 범위 내에서 음향창 시편의 크기를 최소화 시킬 수 있으며 제한된 공간에서도 효율적으로 음향창 시편의 투과 손실을 측정 할 수 있다. 본 논문에서는 parametric array를 이용하여 음향창 시편의 크기를 최소화 하고 이를 이용하여 음향창 투과 손실을 측정하는 연구를 수행하였다.