• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.5
• /
• pp.602-608
• /
• 1999

멀티미디어 서비스를 제공하는 미래의 이동통신 시스템에서는 데이터의 신뢰성 있는 전송을 위해 물리 계층에서 제공하는 프레임 에러율을 감소시켜야한다. 이를 위해 라디오링크프로토콜(RLP : radio link protocol) 계층에서는 ARQ(automatic repeat request)기법을 사용한다. 본 논문에서는 멀티미디어 서비스를 제공하는 차세대 이동통신 시스템에 적용될수 있는 새로운 SR(Selective repeat) ARQ 기법을 제안하고 그 성능을 분석한다. 제안하는 SR 기법은 재전송이 반복될수록 NAK(negative acknowledge)수와 재전송 프레임수를 지수적으로 (exponentially)증가시킴으로써 프레임손실확률을 감소시킨다. 또한 제안한 SR 기법의 성능을 기존의 전형적인 SR 기법 및 IS-707의 SR 기법과 비교하였다. 비교결과, 제안한 SR 기법은 프레임 손실 확률과 프레임 전송지연 측면에서 다른 두 비교대상 Sr 기법들에 비해 더 나은 성능을 제공한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3A
• /
• pp.213-220
• /
• 2009

Cooperative diversity is a promising technique for range extension and diversity increase without the use of multiple transmit antennas at the user equipment. In this paper, we propose a cooperative hybrid automatic repeat request relay method with adaptive retransmission to increase the throughput when the SNR of a source user is low. In the proposed method, the source user transmits the first segment of a codeword to relay users and a base station. If the base station fails to recover the information from the received packet, it requests the source or some relay users to retransmit the packet previously sent. In addition, the retransmission type of a selected user is chosen from repetition or incremental redundancy according to the quality of systematic bits in a turbo codeword. Simulation results show that the proposed method improves the throughput compared to conventional methods, and the improvement is significant when the source user has a low SNR.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1117-1122
• /
• 2005

This paper is studied the high-repetition rate optical-pulse stream generation using optical loop mirror coupler. With the recent development of the ultrahigh-speed optical time division multiplexed system, hish-repetition rate optical-pulse stream generation is necessary. This is different from conventional approaches, which use fiber or integrated waveguide delay line circuits. The high-repetition-rate optical-pulse multiplication phenomenon occurs when the optical pulse's spectral width is greater than the transfer bandwidth of the coupler used. From the analysis, the output repetition rate can be controlled by using fiber couplers with different equivalent transfer bandwidths. The pulse separation spacing is controlled by number of cascaded coupler in optical loop mirror coupler scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.460-466
• /
• 2007

There are two coordination functions in IEEE 802.11 standard. One is PCF, polling based function, and the other is DCF, contention based function. DCF is simpler than PCF but the performance is similar with the latter. That's the reason why DCF is more popular than PCF. However, DCF has a risk of collision with other nodes in the network because the function is a distributed contention based one. CSMA/CA of DCF has collision avoidance algorithm in it, but the performance of avoidance algorithm has limitations. In this paper we proposed a new scheme called TAR(Tone-based Access scheme with Repetitive conention). In TAR, there is narrow contention-only channel other than original data transmitting channel, so that both a data transmission and the contention can be performed simultaneously. The TAR uses the same contention concept with the CSMA/CA, but it has the originality for the narrow contention channel and the repetitive contention scheme which greatly reduce the collision probability. We proved the performance of TAR by some simulations, and it showed good results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.224-231
• /
• 2003

In this paper we proposed system parameter values of ultra-wideband Impulse Radio systems for the frequency band(3.1~10.6GHz), which is allocated by Federal Communications Commission(FCC). We also analyzed performance of the proposed system in the multiple access interference environment. According to result, application of possible pulse duration($t_{n}$) is very limited by 0.04~0.0326 ns in permission frequency range that establish in FCC. In the case of the same pulse signal power, we could know that system performance was changed by pulse repetition number($N_{s}$ ) regardless of pulse duration. Thus, We could know that we have to need duration of monocycle pulse and setting of frame un it time(Τ$_{f}$ ) according to multi user numbers and design proper pulse repetition number by transfer rate in multiple access systems design. In the IR system that needs high speed transmission more than 50 Mbps in multiple access interference environment, we could know that very serious performance decrease by multiple access interference happens. Therefore, as the design of high speed multiple access IR system, it should be designed to additional improvement techniques that can remove multiple access interference at the same time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1086-1094
• /
• 2020

AThis paper measured real sea area for performance analysis according to distance from west sea and south sea of Korea. The performance of the underwater OFDM system was analyzed by comparing the performance of the West and South Seas by adjusting the number of data repetitive transmissions and the pilot symbol placement interval parameters based on the real-sea data measured from the distance and Data rate of the West and South Sea vessels. In conclusion, when comparing the performance of the South Sea at the Data rate and distance, the BER performance of the South Sea was similar at the 5 km South Sea and 1 km West Sea under the same conditions. Placement interval of pilot symbol at 10 km of South Sea and 3 km of West Sea is (𝚫f, 𝚫t) = (6, 3) and the number of times the PRB is (R_f, R_t) = (2, 1) repeated. We confirmed that we can send high data over long distances in the South Sea.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.3 s.333
• /
• pp.9-14
• /
• 2005

OFDM(Orthogonal Frequency Division Multiplexing) is widely used in wideband wireless communication systems due to its excellent performance. However, OFDM has a disadvantage of high peak-to-average power ratio and SC-FDE(Single-Carrier with Frequency-Domain Equalization) was introduced to overcome the drawback. SC-FDE is less sensitive to nonlinear power amplifiers than OFDM while its complexity and performance is comparable. This paper proposes a frequency diversity technique for single-antenna BPSK SC-FDE systems using repeated QPSK transmissions with rearranged transmission patterns.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.199-202
• /
• 2004

데이터 방송은 지상파, 위성, 케이블 둥의 방송망을 이용하여 하나의 송신자가 다수의 수용자에게 디지털 멀티미디어 컨텐츠를 여러 종류의 단말기에 전송하는 것으로 컨텐츠는 프로그램에 연동되는 서비스 및 비연동형 서비스, 또는 대화형 서비스 헝태로 제공되는 다양한 서비스를 포함한다. 방송망을 이용한 데이터방송의 전송 규약은 DSM-CC에서 정의한 캐로셀(carousel) 형태로 전송된다. 캐로셀은 주기적으로 반복 전송되는 데이터 모듈을 가리키며, 캐로셀로 전송되는 데이터 중에는 MPEG-2 비디오로 인코딩되어 광고와 배경 이미지 등으로 사용할 수 있는 영상 데이터가 있다. 이 MPEG-2 비디오 영상 데이터를 TV화면에 출력하기 위해 셋톱박스의 미들웨어는 썬 마이크로시스템즈(Sun Microsystems)에서 만든 자바 기반의 JMF(Java Media Framework) 플레이어를 통해 화면에 출력한다 이렇게 제공되는 MPEG-2 비디오 영상 데이터를 비디오 드립(drips)이라 하고, 비디오 드립을 JMF 플레이어를 통해 화면에 출력하는 모드를 드립피드(drip-feed) 모드라 한다. 그러나 MHP용 셋톱박스를 위한 JMF 버전 1.0은 그대로 사용 할 수 없다. 비디오 드립 모드를 위한 구현이 없기 때문에 별도의 확장을 통해 비디오 드립을 지원하거나, 네이티브(Native) 메소드를 만들어 JMF를 확장하는 방식을 제공해야 한다. 본 논문에서는 데이터 캐로셀로 전송되는 비디오 드림 모드를 구현하기 위해 네이티브 코드로 JMF를 확장해서 비디오 드립을 JMF 플레이어를 통해 TV 화면에 출력하는 MPEG-2 비디오 드립 디코더를 설계하고 구현하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.2
• /
• pp.49-56
• /
• 2020

We investigate the transmit power control algorithm for multi-access points environment. Each terminal may transmit a signal to one of these access points. Each access point may receive a signal from desired terminals as well as interference from neighbor terminals. In this paper, a transmit power control algorithm is developed such that the total transmit power is minimized, while each terminal meets the target signal to interference ratio (SIR) requirement. In particular, the effect of increasing the number of access-points on the total transmit power consumption is analyzed. Based on this analysis, we propose a convergence guaranteed power control algorithm. We prove that the proposed iterative algorithm always converges to the target SIR. In addition, we show that the proposed algorithm optimizes the transmit power level. Simulation results show that the proposed algorithm guarantees convergence regardless of the number of access points. We also observed that increasing the number of access points reduces the total transmit power consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6B
• /
• pp.709-716
• /
• 2001

반복 복호 알고리듬에 의해 복호화된 터보 코드는 가산성 백색 가우시안 잡음(AWGN) 채널 환경에서 이론적으로 Shannon의 한계에 근접한 뛰어난 코딩 이득을 나타내는 것으로 보여지고 있다. 그러나, 터보 코드의 성능은 터보 부호화기에서 프레임의 크기 즉, 인터리버의 크기에 의존한다. IMT-2000과 같은 이동 통신 채널 환경에서 음성을 전송하는 경우에는 터보 코드의 프레임 크기는 매우 작다. 그리고, 그것은 터보 코드의 성능을 떨어뜨리는 직접적인 원인이 된다. 본 논문에서는 차세대 이동 통신 시스템에서 프레임 크기가 작은 음성 프레임을 이용하여 터보 코드의 성능을 검증하며, 작은 프레임 크기에 알맞은 3개의 직렬 MAP(Maximum A Posteriori probability) 복호기를 이용한 반복 복호의 터보 코드를 제안하고 부호율 1/3, 구속장의 길이 3 또는 4, 프레임 크기 24, 192 비트에 대하여 컴퓨터 모의실험을 통해 터보 코드의 성능을 분석한다.