• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.65-73
• /
• 2007

In the inverse perturbation method, enormous computational resource was required to obtain reliable results, because all unspecified DOFs were considered as unknown variables. Thus, in the present study, a reduced system method is used to condense the unspecified DOFs by using the specified DOFs, and to improve the computational efficiency as well as the solution accuracy. In most of the conventional reduction methods, transformation errors occur in the transformation matrix between the unspecified DOFs and the specified DOFs. Thus it is hard to obtain reliable and accurate solution of inverse perturbation problems by reduction methods due to the error in the transformation matrix. This numerical trouble is resolved in the present study by adopting iterative improved reduced system(IIRS) as well as by updating the transformation matrix at every step. In this reduction method, system accuracy is related to the selection of the primary DOFs and Iteration time. And both are dependent to each other So, the two level condensation method (TLCS) is selected as Selection method of primary DOFs for increasing accuracy and reducing iteration time. Finally, numerical verification results of the present iterative inverse perturbation method (IIPM) are presented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.347-352
• /
• 2007

Eigenvalue reduction schemes approximate the lower eigenmodes that represent the global behavior of the structures. In the previous study, we proposed a two-level condensation scheme (TLCS) for the construction of a reduced system. In the first step, the selection of candidate elements by energy estimation, Rayleigh quotient, through Ritz vector calculation. In the second step, the primary degrees of freedom are selected by the sequential elimination method from the degrees of freedom connected to the candidate elements in the first step. In the present study, we propose TLCS combined with iterative improved reduced system (IIRS) to increase accuracy of the higher modes in the intermediate range. Also, it is possible to control the accuracy of the eigenvalues and eigenmodes of the reduced system. Finally, numerical examples demonstrate the performance of the proposed method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.98-104
• /
• 2002

System condensation technique improves the efficiency of the inverse perturbation method of damage detection developed in the previous work. The technique is applied to transform the unmeasured DOFs to the measured DOFs. This approach makes it possible to eliminate the unmeasured DOFs, which accelerates the computational efficiency. The numerical instability problems due to the system condensation technique are also resolved by updating the transformation matrix for each step, and also by adopting the accelerated improved reduced system(AIRS) condensation method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.3
• /
• pp.281-285
• /
• 2008

Eigenvalue reduction schemes approximate the lower eigenmodes that represent the global behavior of the structures. In the previous study, we proposed a two-level condensation scheme (TLCS) for the construction of a reduced system. And we have improved previous TLCS with combination of the iterated improved reduced system method (IIRS) to increase accuracy of the higher modes intermediate range. In this study, we apply previous improved TLCS to multi-level sub-structuring scheme. In the first step, the global system is recursively partitioned into a hierarchy of sub-domain. In second step, each uncoupled sub-domain is condensed by the improved TLCS. After assembly process of each reduced sub-eigenvalue problem, eigen-solution is calculated by Lanczos method (ARPACK). Finally, Numerical examples demonstrate performance of proposed method.

• Geophysics and Geophysical Exploration
• /
• v.22 no.2
• /
• pp.72-79
• /
• 2019

Underwater object detection method adopting electrical resistivity technique was proposed recently, and the need of advanced data processing algorithm development counteracting various marine environmental conditions was required. In this paper, we present an improved water tank experiment system and its operation results, which can provide efficient test and verification. The main features of the system are as follows: 1) All the processes enabling real time process for not only simultaneous gathering of object images but also the electrical field measurement and visualization are carried out at 5 Hz refresh rates. 2) Data acquisition and processing for two detection lines are performed in real time to distinguish the moving direction of a target object. 3) Playback and retest functions for the saved data are equipped. 4) Through the monitoring screen, the movement of the target object and the measurement status of two detection lines can be intuitively identified. We confirmed that the enhanced physical modeling system works properly and facilitates efficient experiments.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.139-145
• /
• 2009

Reduction scheme is remarkably useful in the case requiring the repeated calculation procedure. Recently, the efficiency of the reduction scheme has been improved by combining scheme of sub-domain method. But, when the global domain is partitioned into a few sub-domains, sub-domains without constraints can be produced. it is needed to extract the ritz vector from each sub-domain to construct the reduced system of each sub-domain. it is easy to extract the ritz vector from sub-domain with constraint. on the other hand, pseudo inverse method should be employed to extract the ritz vector from sub-domain without constraint. generally, the pseudo inverse takes a large number of computing time to obtain a reduced system of a sub-domain without boundary condition. This trouble can be overcome by the reduced pseudo inverse scheme which proposed in this study. This scheme is based on the static condensation that is not related with selection of the primary degrees of freedom. Numerical examples demonstrate that present method saves computational cost effectively and predicts the accurate eigenvalues.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.2
• /
• pp.173-179
• /
• 2009

Reduction scheme is remarkably useful in the case requiring the repeated calculation procedure. Recently, the efficiency of the reduction scheme has been improved by combining scheme of sub-domain method. But, when the global domain is partitioned into a few sub-domains, sub-domains without constraints can be produced. it is needed to extract the ritz vector from each sub-domain to construct the reduced system of each sub-domain. it is easy to extract the ritz vector from sub-domain with constraint. on the other hand, pseudo inverse method should be employed to extract the ritz vector from sub-domain without constraint. generally, the pseudo inverse takes a large number of computing time to obtain a reduced system of a sub-domain without boundary condition. This trouble can be overcome by the reduced pseudo inverse scheme which proposed in this study. This scheme is based on the static condensation that is not related with selection of the primary degrees of freedom. Numerical examples demonstrate that present method saves computational cost effectively. In addition, it is shown that the reduced system based on the proposed scheme predicts the accurate eigenvalues of global system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.25-30
• /
• 1992

최근 전자계산기를 이용한 진동해석 방법이 눈부시게 발달하여, 일반 구조물 이나 기계 구조물 등의 동특성을 설계 단계에서 정도 높게 예측하는 것이 가능하게 되었다. 그러나 종래의 구조해석은 주어진 시스템의 동특성을 위한 것으로 얻어진 동특성으로부터 질량, 관성제원 및 스프링상수값 등의 설계상 수값을 규명하는 연구는 미미한 실정이다. 이것에 대한 해결방법으로 크게 해석적인 방법과 실험적인 방법으로의 접근이 있어 왔다. 해석적인 방법으로 유한요소해석에서 얻은 모드좌표를 물리좌표로 변환하는 방법으로 Guyan의 정축소와 같은 절점축소를 행하는 방법이 고찰되었다. 실험적인 방법으로 가 진실험에서 얻은 전달함수나 모드파라미터로부터 [M], [K] 행렬을 결정하는 연구가 있었지만 어떤것도 질량, 스프링상수 등의 설계상수를 완전히 규명하 지는 못하였다. 또한, 설계 단계에서 필요한 질량, 관성제원 또는 스프링상수 등의 최적한 값이나, 원하는 시스템특성을 얻을 수 있는 설계상수의 적정한 폭을 구하는 연구는 설계자의 경험과 반복된 시행착오에 의존하는 실정이다. 감도해석은 이러한 문제점을 개선하는 수단으로 설계변수에 대한 동특성의 변화율을 구하는 것이다. 감도해석을 수행하는 것은 어느 설계변수를 수정하 는 것이 주어진 동특성에 부합되는 지를 알려주고, 어느 것을 수정하는 것이 원하는 방향의 동특성변화에 가장 효과적인지를 알려주는 것이다. 따라서 감 도해석을 이용하여 설계의 최적화 프로그램을 만들수 있고, 이것은 설계자가 요구하는 동특성을 목적함수로 하여 주어진 구조물을 최적화하는 설계상수 값을 얻을 수 있게 한다. 본 논문에서는 강체모델의 동특성으로부터 모델의 설계 상수를 규명하고, 동특성의 개선을 위하여 설계변수의 변경량을 물리좌 표계에서 얻는것을 목적으로 한다. 강체 마운트계의 관성제원 및 마운트강성 의 규명을 위하여 임으로 주어진 설계상수를 모델데이타로 하여 관성제원과 스프링 강성을 구하였다. 관성제원의 규명은 주어진 모델의 관성값을 모르는 것으로 하여 임의의 초기 관성값으로 감도해석에 의해 주어진 계의 관성값 을 물리 좌표계에서 규명하였다. 마운트 강성의 규명도 관성제원의 규명과 같은 방법으로 임의의 강성값으로 감도해석을 하여 강성값을 규명하였다. 또 한 감도해석에 의한 동특성 변경은 특정한 고유진동 수의 변경이 필요할 때, 고유진동수의 이동을 위한 관성제원의 변경 및 마운트 강성변경값을 예측할 수 있다. 본 연구수행의 기본적인 흐름도는 Fig.1.1과 같다. 위와 같은 작업 으로 엔진 마운트와 같은 강체 모델의 시스템 규명을 행하는 경우에 유한요 소해석 및 가진 실험으로 얻은 고유진동수의 정보 또는 원하는 고유진동수 의 특성을 기본으로 실제 설계에서 사용이 가능하도록 물리 좌표계에서 관 성 제원 및 스프링상수를 구할 수 있을 것이다.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.70-76
• /
• 2010

This paper Extended ELZW(EBCDIC Lempel Ziv Welch) algorithm uses 2 byte prefix field for pointer of a table and 1 byte suffix field for repeat counter. where, a prefix field uses a pointer(index) of compression table and a suffix field uses a counter of overlapping or recursion text data in compression table. To increase compression ratio, after construction of compression table, table data are properly packed as different bit string in accordance with a alphabet, Hangeul, and pointer respectively. Therefore, proposed ELZW algorithm is superior to 1byte LZW algorithm as 5.22 percent and superior to 2byte LZW algorithm as 8.96 percent.

• KIISE Transactions on Computing Practices
• /
• v.21 no.12
• /
• pp.774-779
• /
• 2015

In this paper, we present the design and implementation of a large-scale qualitative spatial reasoner using Apache Spark, an in-memory high speed cluster computing environment, which is effective for sequencing and iterating component reasoning jobs. The proposed reasoner can not only check the integrity of a large-scale spatial knowledge base representing topological and directional relationships between spatial objects, but also expand the given knowledge base by deriving new facts in highly efficient ways. In general, qualitative reasoning on topological and directional relationships between spatial objects includes a number of composition operations on every possible pair of disjunctive relations. The proposed reasoner enhances computational efficiency by determining the minimal set of disjunctive relations for spatial reasoning and then reducing the size of the composition table to include only that set. Additionally, in order to improve performance, the proposed reasoner is designed to minimize disk I/Os during distributed reasoning jobs, which are performed on a Hadoop cluster system. In experiments with both artificial and real spatial knowledge bases, the proposed Spark-based spatial reasoner showed higher performance than the existing MapReduce-based one.