• Journal of the Korea Concrete Institute
• /
• v.13 no.5
• /
• pp.415-422
• /
• 2001

The present paper focuses on the development of a realistic analysis model for the deformation calculation of reinforced concrete beams subjected to fatigue loadings. The proposed model considers the effect of cyclic creep, which arises from the repeated loading, to calculate the deformation of reinforced concrete beams. A comprehensive experimental program has been set up to identify the deformation accumulation of reinforced concrete beams under repeated loadings. The major test variables were the concrete compressive strength and the magnitude of fatigue loads. The model was calibrated from the present test results. The proposed model allows more realistic analysis of reinforced concrete beams under fatigue loads, especially deformation accumulation of such beams.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.120-126
• /
• 2010

This paper propose analysis and examination of the melting characteristic of fuse elements by repeating overcurrent as a depletion factor of high pressure current limiting fuse through test following existence and nonexistence of extinction material and various configuration of elements. To examine deterioration progress rate by repeating overcurrent we analyzed heat for various element notching configuration, designed plate type, ring type element and estimated the relationship with life span by analyzing breaking characteristic through repeating overcurrent test with adjusting load factor at Silicon Dioxide(SiO2) filled state or in air. A Crack by repeat stress, decrease of section and transformation by friction with extinction material by repeating overcurrent causes a problem which shortens life span based on fuse repeating frequency. Since the contents of this paper might be useful to research the correlation between friction of materials and repeating life span based on load factor of repeating current, the quality of product would be improved through solution of the problem.

• The Korean Journal of Applied Statistics
• /
• v.21 no.6
• /
• pp.1027-1035
• /
• 2008

This research is aimed to investigate the effect of repetitive dive on physiological reactions, change of stress hormones in no decompression limit of sport SCUBA dive, an emerging recreational activity recently. In order to compare physiological reactions prior to and after the initial dive and after repetitive dive at a certain depth of a place, eight adult male divers with more than forty dives, who reside in Busan and were certified, were selected. The research results obtained from the procedures described above are follows: First, for physiological reactions, heart rates, temperatures, and systolic blood pressures had significant difference among prior to and after the initial dive and after the repetitive dive, while diastolic blood pressures did not show remarkable difference as it increased before and after the first dive but decreased following the repetitive dive again. Second, for change of stress hormones, it was not significantly different prior to and after the initial dive and following the repetitive dive, as well as before and during the first dive and the repetitive dive.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.4 s.22
• /
• pp.53-61
• /
• 2006

In th is paper, to predicting the large deformation and cyclic plastic behavior of steel members under loading, 3-Dimensional elastic-plastic FE analysis method is developed by using finite deformation theory and proposed cyclic plasticity model. finite deformation theory, described the large deformation, is formulated by using Updated-lagrangian formulation and Green's strain tensor, Jaumann's derivative of Kirchoff stress. Also, cyclic plasticity model proposed by author is applied to developed analysis method. To verification of developed analysis method, analysis result of steel plate specimen compare to the analysis result using infinitesimal deformation theory and test result. Also, load-displacement and deflection shape, analysis result of pipe-section steel column, compare to test result. The good agreement between analysis result and experiment result shown that developed 3-dimensional finite element analysis can be predict the large deformation and cyclic plastic behavior of steel members.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.12
• /
• pp.25-31
• /
• 2022

Unlike structures installed on land, the structures installed on the offshore ground must consider long-term cyclic loads such as wave loads, wind loads and tidal loads at sea. Therefore, it is important to analyze the behavior of the ground subjected to long-term cyclic loads in order to design a structure installed on the ocean ground. In this paper, cyclic simple shear tests were performed to analyze the ground behavior for long-term cyclic loads according to the confining pressure, and a three-dimensional design failure curve was prepared that can easily check the failure characteristics according to the confining pressure. As a result of the analysis, it was confirmed that the position of the design failure curve is different depending on the confining pressure even under the same conditions of the cyclic shear stress ratio and the average shear stress ratio, and the number of cyclic loads reaching failure is affected by the confining pressure. From the created 3-D design failure curve under different confining pressure, the tendency and approximate value of the design failure curve according to the confining pressure can be estimated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.231-238
• /
• 2004

The deterioration of the flexural capacity by progressive crack and over deflection in R/C bridges is developed actually from the dynamic repeated loading due to vehicle traffics. Such a fact suggest a necessities of confirmation and estimation of the data acquired from monotonic incremental loading test. Therefore, this study carry out the monotonic incremental loading test and dynamic repeated loading test in R/C beams strengthened with CFS. By dynamic repeated loading test, the experiments confirmed the validities and fittness of the results acquired from monotonic incremental loading test and estimated the characteristics of the moment-curvature, degradation of the flexural rigidity, crack and failure.

• Korean Journal of Cognitive Science
• /
• v.16 no.4
• /
• pp.255-270
• /
• 2005

Memory for repeated items is better if they are repeated in a spaced than in a massed fashion (Sparing effect). To investigate the neural mechanisms of sparing effect and successful encoding, lags of repetition were manipulated at encoding stage in an event-related MU study. The behavioral data showed typical spacing effect on recognition judgment, and greater activity for items that were repeated in a spaced fashion than for items that were repeated in a massed fashion has been observed in dorsolateral frontal cortex(DLFC) and ventrolateral frontal cortex(VLFC) of left hemisphere. These conical regions also showed greater activity for novel items than for items that were repeated in a massed fashion. These findings suggest that sparing effect and its relevant successful encoding are attributed to higher level of attentional control and semantic processing.

• Annual Conference on Human and Language Technology
• /
• 2018.10a
• /
• pp.120-125
• /
• 2018

문서 요약 문제는 최근 심층 신경망을 활용하여 활발히 연구되고 있는 문제 중 하나이다. 많은 기존 연구들이 주로 시퀀스-투-시퀀스 모델을 활용하여 요약을 수행하고 있으나, 아직 양질의 요약을 생성하기에는 많은 문제점이 있다. 시퀀스-투-시퀀스 모델을 활용한 요약에서 가장 빈번히 나타나는 문제 중 하나는 요약문의 생성과정에서 단어나 구, 문장이 불필요하게 반복적으로 생성되는 것이다. 이를 해결하기 위해 다양한 연구가 이루어지고 있으며, 이들 대부분은 요약문의 생성 과정에서 정확한 정보를 주기 위해 모델에 여러 모듈을 추가하였다. 하지만 기존 연구들은 생성 단어가 정답 단어로 나올 확률을 최대화 하도록 학습되기 때문에, 생성하지 말아야 하는 단어에 대한 학습이 부족하여 반복 생성 문제를 해결하는 것에는 한계가 있다. 따라서 본 논문에서는 기존 요약 모델의 복잡도를 높이지 않고, 단어 생성 이력을 직접적으로 이용하여 반복 생성을 제어하는 모델을 제안한다. 제안한 모델은 학습할 때 생성 단계에서 이전에 생성한 단어가 이후에 다시 생성될 확률을 최소화하여 실제 모델이 생성한 단어가 반복 생성될 확률을 직접적으로 제어한다. 한국어 데이터를 이용하여 제안한 방법을 통해 요약문을 생성한 결과, 비교모델보다 단어 반복이 크게 줄어들어 양질의 요약을 생성하는 것을 확인할 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.1
• /
• pp.89-95
• /
• 1989

In this study, it is attempted to examine (1) the residual deformation and elastic deformation induced from the repeated loads (up to the maximum of 100,000 times) on fully compacted soil specimen, the relation between stress and strain by performing the unconfined compressive test, after repeated loads and (2) the effect of water content, dry density, number of cycle, repeated loads, etc. on the effect of the stress-strain relation. The rate of deformation caused by repeated loads greatly depends on to the condition whether the water content is above or below the plastic limit. It is possible to estimate the initial tangent modulus of soil by means of modulus of elastic deformation obtained by putting repeated loads on the clay soil.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.98.2-98.2
• /
• 2011

지구 온난화의 원인이 되는 이산화탄소를 저감하며 유해한 배기가스를 배출하지 않는 수소연료전지자동차(FCV)에 대한 관심이 높아지고 있다. 한국가스안전공사에서 현재 구축하고 있는 평가장비는 이러한 수소연료전지자동차용으로 사용되는 고압용기의 수압반복시험 및 밸브류로 구성된 고압수소저장시스템의 단품 및 시스템 평가를 통한 안전신뢰성 검증을 목적으로 하고 있다. 현재 수소연료전지자동차는 차량이나 부품의 시험 방법에 대한 통일된 기준/표준/시험법이 아직 완전하게 정비되어 있지 않고, 시장에서의 도입 제도, 기준 등이 만들어지고 있는 현실이다. 또한 연료로 수소를 사용하는 도입단계에 있기 때문에, 수소용기가 반복압력변동에 따라 어떤 거동을 나타내는지에 대한 실험관련 연구가 미진한 상태이다. 따라서 수소연료전지자동차용 고압수소저장시스템에 대한 내구성, 안전성 확보를 위하여 수소연료전지자동차에서 중요한 부품인 용기에 대한 반복피로시험이 필요하다. 특히 복합재 용기 분야에서 Type3용기에 대한 높은 안전성과 내구성이 보고되고 있지만 실질적으로 얼마나 다른 용기에 비해 높은 성능을 가지고 있는지 국내에서는 체계적으로 검증된바 없다. 따라서 구축된 수압반복 장비를 이용하여 Type3 용기에 대한 수압반복시험을 실시하였으며, 이를 통해 수소용기의 거동을 확인하고자 한다.