• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1530-1537
• /
• 1991

본 연구에서는 반무한 직선 계면균열의 상하면에 임의로 분포하는 어떠한 하 중에 대해서도 그 해석이 가능한 그린함수(Green's function)를 구하고자 한다. 이 를 위하여 반무한 직선 계면균열상의 임의의 한 점에 평면 집중하중이 작용하는 문제 와 비평면 집중전단하중이 작용하는 문제를 각각 택하였고, 이때 계면균열의 선단은 열려있다고 가정하였다. 이 문제를 풀므로써 균열선단부근의 응력성분을 결정하고 이로부터 그린함수의 의미를 지니는 응력강도계수에 대한 폐형해를 얻었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.7-11
• /
• 2017

In this study, we develop the exact field of mode I in an infinitely deep crack in a half-plane. Using this field, we obtain the exact stress intensity factor $K_{I}$. From the tractions on the crack faces induced by exact field, we calculate the stress intensity factor of this field. We compare the results with the stress intensity factor calculated using Bueckner's weight function formula and that calculated by using Tada's formula listed in "The Stress Analysis of Cracks Handbook" It was found that Bueckner's formula yields accurate results. However, the results obtained using Tada's formula exhibit inaccurate behavior.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.433-440
• /
• 2002

A branched crack in a semi-infinite plate under uniform tension and bending moment is considered in this study By using the superposition, the stress and moment intensity factors for the branched crack subjected to uniform tension and bending moment we evaluated. The stress intensity factors we obtained by using the finite element method and the J-based mutual integral. The moment intensity factors are calculated by extrapolating the values of the moment new the crack tip. Numerical results lot the normalized stress and moment Intensity factors we shown as functions of the ratio of branched crack length to main crack length and the branching angle.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.277-284
• /
• 1993

Interfacial surface crack perpendicular to the surface, which is imbedded into bonded quarter planes under single anti-plane shear load is analyzed. The problem is formulated using Mellin transform, form which single Wiener-Hopf equation is derived. By solving the equation stress intensity factor is obtained in closed form. This solution can be used as a Green's function to generate the solutions of other problems with the same geometry but of different loading conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1557-1564
• /
• 2000

When the half infinite crack in the orthotropic material strip with a large anisotropic ratio(E11>>E22) propagates with constant velocity, dynamic stress component $\sigma$y occurre d along the $\chi$ axis is derived by using the Fourier transformation and Wiener-Hopf technique, and the dynamic stress intensity factor is derived. The dynamic stress intensity factor depends on a crack velocity, mechanical properties and specimen hight. The normalized dynamic stress intensity factors approach the maximum values when normalized time(=Cs/a) is about 2. They have the constant values when the normalized time is greater than or equal to about 2, and decrease with increasing a/h(h: specimen hight, a: crack length) and the normalized crack propagation velocity( = c/Cs, Cs: shear wave velocity, c: crack propagation velocity).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.815-818
• /
• 2001

The buckling of an orthotropic layer bonded to an isotropic half-space with an interface crack subjected to compressive load under plane strain is considered. Basic stability equations derived from the mathematical theory of elasticity are applied to describe the buckling behavior. A system of homogeneous Cauchy-type singular integral equations of the second kind is solved numerically by utilizing Gauss-Chebyshev integral formulae. Numerical results for the buckling load are presented for various delamination geometries and material properties of both the layer and half-space.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.12
• /
• pp.95-103
• /
• 2001

The buckling of an orthotropic layer bonded to an orthotropic half-space with an interface crack subjected to compressive load under plane strain is analyzed. General solution to the stability equations describing the buckling behavior of both the layer and the half-space is expressed in terms of displacement functions. The displacement functions are represented by the solution of Cauchy-type singular integral equations, which are numerically solved. Numerical results of the critical buckling loads are presented fur various geometric parameters and material properties of both the layer and half-space.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.10
• /
• pp.3126-3134
• /
• 1996

In this paper, to examine the propagation of inclined surface crack due to frictional heating, analytic model is considered as the semi-infinite elastic body subjected to the thermo-mechanical loading of an asperity moving with a high speed. Considering the moving of frictional heat source and convection on a semi-infinite surface having inclined crack, theoretical analysis was carried out to estimate the propagation characteristics of thermo-mechanical crack. Numerical results showed that stress intensity factor $K_\prod/P_0\sqrt{c}$ is increasing with increasing velocity and frictional coefficient, inclined degree, decreasing crack length and the maximum value of it is positioned at the trailing edge. So it is shown that the propagation probability of surface crack is high at the trailing edge of contact area as increasing velocity and frictional coefficient, inclined degree, as decreasing crack length.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.665-672
• /
• 2012

Interfacial cracks bonded with dissimilar transversely isotropic piezoelectric media that are subjected to combined anti-plane mechanical and in-plane electrical loading are analyzed. The problem is formulated using complex function theory, from which the Hilbert problem is derived. By solving the Hilbert problem, the general form solution is obtained. Using this solution, closed-form solutions for one or two finite cracks as well as a semi-infinite crack are obtained, for the problem in which one concentrated mechanical and electrical load is imposed on the crack surface. This solution could be used as a Green's function to generate solutions to other problems with the same geometry but different loading conditions.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.155-159
• /
• 2009

Crack-controlled method which utilizes the dynamic energy such as explosives and propellent gases have been applied to the development of mineral resource and oil and civil engineering. It is necessary to consider the fracture processes associated with the material properties and external forces to control crack propagation using borehole pressure. To investigate the influence of the applied borehole pressure waveform on the crack propagation in rock masses having different material properties, a no-free surface model was used, consisting of a borehole in rock with a continuous boundary. Loading rates ranging from 1 to 100MPa/${\mu}s$ with different rock mass properties was employed to investigate the loading rate dependency of fracture patterns in the rock mass.