• (The)Study of the Eastern Classic
• /
• no.43
• /
• pp.259-304
• /
• 2011

It has been difficult to logically and consistently explain about the history of Korean national flag, Taegeukgi, for the past time because the exact shape of Young Hyo Park's Taegeukgi was not known. Any meaningful study of Taegeukgi was no longer possible since the most important core key was lost in the study of Taegeukgi. In this study, I inferred the original copy of Taegeukgi used by Young Hyo Park referring to the aspect of principle of Taegeukgi based on the existing historical data such as the copy of Young Hyo Park's Taegeukgi found in the UK National Archives in 2008, the recordings shown in Shi-wha-ji-lue, the painting of Taegeukgi inserted in Sisashinbo then in Japan, the Taegeukgi painted by Gil Joon Yoo, Denny Taegeukgi, etc. As a result, I have found that Taegeukgi has been handed down in a consistent shape even if China and Japan had tried to disturb and distorted it. That is, the Taegeukgi used by Young Hyo Park was painted following the command of the King Gojong and its shape was already defined before he went to Japan. I have found that such defined shape was the 'COREA Ensign', which was used for the Treaty between Chosun and the United States. I have also found that the 'COREA Ensign' from which Young Hyo Park's Taegeukgi was originated was designed by Gyoung Seok Oh and Gyoung Soo Kim referring to the situations that time. In addition, I have found that Shi-wha-ji-lue giving the base for the existing theory of Taegeukgi designed by Young Hyo Park was partially distorted by Japan.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.2 no.1
• /
• pp.21-29
• /
• 1965

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1997.10a
• /
• pp.14-15
• /
• 1997

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.76-79
• /
• 1998

일반적인 합성 섬유들은 비생분해성 고분자로 환경문제의 원인이므로 이를 대체하기 위하여 생분해성 지방족 폴리에스터가 널리 연구되고 있다.[1] 그러나, 이들의 기계적, 열적 성질이 다른 합성 섬유에 비해 떨어진다. 따라서, 생분해성 고분자의 특성을 유지하면서 기계적 성질을 향상시키기 위하여 다른 유연한 고분자와 지방족 폴리에스터를 공중합하였다.(중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.2
• /
• pp.53-58
• /
• 2005

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.80-84
• /
• 1998

Poly(ethylene terephthalate)(PET)는 물리적, 기계적 성질이 우수한 고결정성 고분자의 하나로 섬유, 필름 및 여러 가지 용도로 다양하게 사용되고 있으나, 일반적으로 흡습성, 난연성 및 염색성 등이 좋지 않은 결점이 있다. 따라서 이러한 결점을 개선하기 위하여 PET 자체의 성질을 개선하거나 다른 고분자와의 공중합 또는 블렌딩하는 방법, 첨가제의 도입, 그래프팅 등 PET의 개질 연구가 많이 수행되고 있으나 대표적인 방법으로 합성반응시 공단량체를 사용하여 공중합체를 제조하는 것이 널리 알려져 있다.(중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.453-456
• /
• 1998

고분자들을 배합하여 기계적, 물리적, 화학적 성질이 우수한 새로운 고분자 재료를 제조할 때 이들 고분자의 상용성을 증가시켜 줄 수 있는 상용화제의 존재가 필수적인데, 주로 블록이나 그라프트 공중합체들이 많이 이용되고 있다. 이러한 공중합체들은 아주 최소량이 사용되고서도 소기의 목적을 달성할 수 있어야 하는데, 이를 위해서는 이러한 공중합체들은 분자구조상 몇 가지 조건을 만족해야 한다. 예를 들면 계면에 존재하면서 넓은 표면적을 감싸주어야 하고 블렌드되는 고분자들과 아주 잘 섞여야 한다는 것 등이 그것이다. (중략)

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.673-677
• /
• 2004

The sensitivities of eigenvalues to the change of element thickness have been calculated for beams in the paper. For a cantilever beam the sensitivities fluctuate more for higher modes. When the thickness of the element near the fixed end increases, the eigenvalues for all modes increase. On the other hand, increasing of the thickness of the element at the tip decreases the eigenvalues for all modes. For a simply supported beam the sensitivities fluctuate more for higher modes, which is the same phenomenon as for a cantilever beam. The sensitivities are always positive for all modes

• Journal of Korean Elementary Science Education
• /
• v.25 no.3
• /
• pp.231-243
• /
• 2006

The purpose of this study was to investigate misconceptions regarding the structure of flowers and the function of the course based on the 'Flower' section of 5th grade elementary school science courses. It also sought to investigate how misconceptions are changed before and after the application of a Driver learning model, and finally analysing any differences in the correction of misconceptions. A questionnaire was created for 199 5th grade elementary school pupils. The major results before and after using an applied Driver learning mode teaching plan are as follows: In the response for questions, 13.6% and 14.5% of misconceptions were corrected for male and female pupils, respectively. For rural and urban pupils, 14.8% and 11.2% of misconceptions were corrected, respectively. In the comparison of male and female pupils according to the reasons for selection of responses before and after using an applied Driver learning model teaching plan, 27.8% of male and 30.0% of female pupils scientific conceptions showed improvement. For rural and urban schools, 26.6% and 32.2% of scientific conceptions were improved, respectively. Data from this study may help teachers to reconsider their own conceptions regarding the study of the flower as it is presently conducted in elementary school.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.4
• /
• pp.437-445
• /
• 2015

A design method for a perforated panel is suggested to reduce the level of incident noise without obstructing the flow of incoming fluid. The key idea was to insert an array of 1/4 wavelength tubes around the holes of the perforate panel. First, various case studies were performed for a unit model with only one hole. In order to avoid any increase in the panel thickness, the unit model was vertically divided into three layers, and only the middle layer was used as the design domain. The number and array of 1/4 wavelength tubes connected to the hole were optimized to obtain the widest effective frequency range in the transmission loss curve as possible. Then, the optimally designed unit model was converted to a periodic array in the perforated panel to achieve the design goals. Even if the target frequency and the target transmission loss were set to 1000 Hz and 10 dB, respectively, the suggested design method for the a perforated panel could achieve noise reduction for various target values.