• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1508-1517
• /
• 1993

In this paper, we propose the modeling of a wireless communication system using CSMA protocol, present analytical evalution and simulation as a function of arrival rate and mean END-to-END delay in the distributed packet radio network. Asynchronous 1-persistent CSMA protocol is used in wireless communication system with half duplex. We assume that all terminals are to be in the close range of each other, suitably located in the local area. The traffic presented to a common channel is assumed to be poisson distribution. Analytical model is based on a M/D/1 with breakdown. In conclusion for wireless network model proposed in this paper is suitable for packet arrival rate of 2 packet/sec with mean packet delay time less than 2 times the packet transmission time.

• Journal of the Korean Ceramic Society
• /
• v.18 no.4
• /
• pp.219-228
• /
• 1981

To clarify influences of silicious raw materials on mineralogcal and petrological properties in clinkering process clay, shale, quartzite, sand and coal ash have been used as silicious raw materials. The tests on thermal properties, reactivity and burnability of raw mixtures which have different silicious raw materials respectively have been made by means of X-ray diffractometry, differential thermal analysis, optical microscopy and transmission electron microscopy. Limestone contains coarse crystalline grains which show 0.1-1.0mm and its decarbonation temperature is 86$0^{\circ}C$. Reaction temperatures among raw mixtures have been determined by X-ray diffractometry and their results are as follows; clay minerals under 1, 00$0^{\circ}C$, mica group, 100$0^{\circ}C$-110$0^{\circ}C$, feldspar group, 1, 10$0^{\circ}C$-1, 20$0^{\circ}C$ and quartz 1, 20$0^{\circ}C$-1, 30$0^{\circ}C$. Burnabilities of raw mixtures of different temperatures have been found that they mainly depend upon their mineral contents in silicious raw materials and their order is as follows; $clay\geq shale\gg quartzite \geq sand$.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.254-257
• /
• 2004

위성신호를 매개로 국가표준에 전국의 모든 노드클럭이 동시에 동기될 수 있는 새로운 형태의 망 동기 클럭 공급 시스템을 제안하였으며 이 방식에 의한 실용화 가능성을 확인하였다. 본 논문에서 새로이 제시하는 방식은 단계적인 물리계층에 의해 동기되던 종래의 방식에 비해 모든 슬레이브 국소들이 동시에 동일한 계위의 품질로 동기 될 수 있는 등의 여러 가지 구조적인 장점을 갖고 있다. 서로 멀리 떨어진 지역에서 같은 위성신호를 동시에 측정하여 얻은 시간차데이터를 활용함으로써 위성을 매개로한 기준클럭과 원격지의 슬레이브클럭과의 위상차를 실시간적으로 측정할 수 있었으며, 컴퓨터 제어에 따라 이들 차이를 보상함으로써 전국의 여러노드에서 멀리 떨어진 기준클럭에 위상동기되는 신개념의 슬레이브 클럭 동기시스템을 설계하고 제작하였다. 이 시스템의 측정결과 $10^{-12}$ 이하의 주파수정확도를 유지하였으며 ITU-T의 권고(G.811)를 충분히 만족하는 MTIE 특성을 보여주었다. 현재 전체적으로 자동화 기능을 갖는 초기모델이 구현되었으며 가까운 시일내에 상용화연구를 통해 디지털 통신망의 동기용 노드클럭으로 사용될 수 있으리라 기대한다.

• Journal of the Korean Ceramic Society
• /
• v.21 no.3
• /
• pp.221-230
• /
• 1984

In this study an investigation was made to determine optimum ratio between $SO_3$, MgO and $K_2O$ that maximizes $C_2S$ formation in Clinkering reaction Using response surface analysis method. It was proved that 1) Residual $K_2O$ int he clinker should be converted to $K_2SO_4$ because $K_2SO_4$ has less effect on the burnability than $K_2O$, 2) Optimum ratio if $SO_3$/K2O is 1.5, 3) Optimun balance between $CaSO_4$ and MgO is to be adjusted to such a level that w/o SO3=0.7(w/o MgO-2).4) In case of lack of $K_2O$ free CaO was minimized when $K_2SO_4$=2.3w/o and MgO=1.5w/o but if remaining $K_2O$ was 2w/o free CaI was minimized in the level that $K_2SO_4$=2.3w/o and MgO =1.5 w/o but if remaining $K_2O$ was 2 w/o free CaO was minimized in the level that $K_2SO_4$=4.5w/o and MgO =3.0 w/o.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.707-708
• /
• 2008

본 논문에서는 초전도 플라이휠 에너지 저장장치 (Superconductor Flywheel Energy Storage System : SFES)의 에너지 변환을 위해 사용된 영구 자석형 전동 발전기(Permanent Magnet Synchronous Motor/Generator : PMSM/G)가 SFES의 에너지 저장효율에 미치는 영향을 평가하였다. SFES 시스템은 YBCO 벌크 초전도체를 이용한 저어널 타입(journal type)의 초전도 베어링을 사용하였으며, 슬롯리스 형 PMSM/G를 사용하였다. PMSM/G의 고정자 코어, 누설 자속 및 감겨진 코일에 의한 저장 에너지 손실을 측정하였다. 사용된 코어의 크기, 누설자속, 및 코일의 적절한 선정을 통하여 저장된 에너지의 손실을 상당히 줄일 수 있음을 확인하였다. 또한 영구자석과 코어가 동시에 회전하는 회전 코어형 전동발전기를 적용하여 에너지 손실을 매우 감소시킬 수 있음을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.4
• /
• pp.335-346
• /
• 1987

The principal reason for the backscattering in an optical fiber is the Rayleigh scattering which is caused by non-uniform density of structure material of an optical fiber and diameter variations of the optical fiber-core along an optical fiber axis. The backscattering signal which is detected by the optical time domain reflectometer system(O.T.D.R) conatains information about both tha actual decay of power and the diameter variation along the optical fiber. In this paper, the O.T.D.R. system with 2x2 fiber directional coupler, timing control unit and gated integrator is used to measure diameter variations of an optical fiber.

• Progress in Superconductivity
• /
• v.12 no.1
• /
• pp.27-31
• /
• 2010

A superconductor flywheel energy storage system (SFES) is an electro-mechanical battery which transforms electrical energy into mechanical energy for storage, and vice versa. Many aspects of the quasi-static behavior of flywheel rotors still need to be studied closely, and the rotors require a stable and highly efficient supporting system such as high temperature superconductor (HTS) bearings, which offer dynamic stability without the use of active control. Quasi-static properties of HTS bearings in the radial direction provide data to solve problems which may occur in a running system. Since stiffness in countering rotor vibration is the main parameter for designing an HTS bearing system, we investigated the quasi-static properties of the magnetic force between permanent magnets(PMs) and HTS bulks in the radial direction. We measured radial stiffness, and discovered that bearing stiffness varied greatly depending on the number of active HTS bulks. This is valuable data for predicting the change in stiffness during partial HTS bearing failure. The quasi-static test results are used for optimal design and performance prediction for the 100 kWh class superconductor bearing.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.4
• /
• pp.21-30
• /
• 1987

Length normalization by variable frame size is proposed as a novel approach to length normalization to solve the problem that the length variation of spoken word results in a lowing of recognition accuracy. This method has the advantage of curtailment of recognition time in the recognition stage because it can reduce the number of frames constructing a word compared with length normalization by a fixed frame size. In this paper, variable frame length normalization is applied to multisection vector quantization and the efficiency of this method is estimated in the view of recognition time and accuracy through practical recognition experiments.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.146-149
• /
• 2007

The effects of boron additions in steels have long been recognized as very important, mainly with respect to hardnability of heat treatable steels. The systematics of structure and properties of boron steels will then be illustrated in the context of low-alloy steels with carbon contents raging from 0.05 to 0.25% and boron contents 0-130 ppm. we investigated the effect of the microstructure and mechanical properties with heat treatment condition of the boron-treated(0.0013 ppm) low carbon(0.2 %C) low alloy steel. The specimens were austenitised for 5 and 10, 15 min at $880{\sim}940^{\circ}C$(with/without tempered at 150, 180 and $210^{\circ}C$ for the various periods of time from 60 min to 120 min) After heat treatment, mechanical properties were measured by tensile test and hardness test. For analysis of microstructure, Optical/SEM analysis and XRD were carried out.

• The KSFM Journal of Fluid Machinery
• /
• v.12 no.4
• /
• pp.30-36
• /
• 2009

Recently, there has been growing interest in the oxyfuel combustion cycle since it enables high-purity $CO_2 capture with high$ efficiency. However, the oxyfuel combustion cycle has some important issues regarding to its performance such as the requirement of water recirculation to decrease a turbine inlet temperature and proper combustion to enhance cycle efficiency. Also, Some of water vapour remain not condensed at condenser outlet because cycle working fluid contains non-condensable gas, i.e., $CO_2$. The purpose of the present study is to analyze performance characteristics of the oxyfuel combustion cycle with different turbine inlet temperatures, combustion pressures and condenser pressure. It is expected that increasing the turbine inlet temperature improves cycle efficiency, on the other hand, the combustion pressure has specific value to display highest cycle efficiency. And increasing condensing pressure improves water vapour condensing rate.