• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.49-49
• /
• 2020

하천 보 상류영역에서 발생하는 박리 흐름을 분석하기 위해 실험수로에 하천보 모형을 설치하고, 보 주변에서 발생하는 흐름 구조를 입자 영상 유속계(PIV)로 이용하여 정밀하게 측정하였다. 본 연구에 사용된 보는 하천 설계기준을 따른, 전방 수직벽과 하류 경사램프가 있는 유한한 마루 길이 보이다. 실험 조건은 보 상·하류부 수심으로 인한 4가지 흐름(Hydraulic jump, Plunging jet, Surface wave, Surface jet)을 기반으로 설정하여 수리조건에 따른 유속 특성을 규명하였다. 실험에서 측정한 수직-수평방향 평균 유속·유선도를 분석한 결과, 보 전방의 하부에서 재순환 흐름이 관측되었고, 역방향 흐름도 이 지역에서 발견되었다. 유속 편차의 제곱 평균(Root Mean Square) 흐름장에서 보 전방과 재순환 흐름 영역에 불안전한 흐름이 강하게 발견되었다. 역방향 흐름은 박리 흐름에서 발견되는 주요 특성으로, 역방향 흐름의 전체 면적을 매 관측마다 측정하여 이를 분석한 결과, 재순환 흐름의 면적은 오른쪽으로 기울어진 분포를 가지고, 항상 0보다 큰 값을 가지는 것으로 나타났다. 재순환 면적에 따른 흐름 특성은 역방향 흐름 면적에 대한 조건부 평균을 이용하여 파악했는데, 조건부 평균의 구간은 재순환 흐름의 중심에서 지배적인 주기값을 이용했다. 역방향 흐름이 작은 영역에선, 보 상류의 흐름이 재순환 흐름으로 말려들어가는 열린 박리흐름이 나타나며, 역방향 흐름이 큰 경우에는 재순환 영역의 흐름은 보 상류의 흐름과 분리되는 닫힌 박리흐름이 발생하였다. 역방향 흐름이 가장 큰 경우, 보 전방의 박리흐름은 보의 상단을 넘는 것으로 관찰되었다. 이러한 결과를 통해 보 마루에서 발생하는 박리흐름이 보 전방에 박리흐름에 영향을 미치는 것으로 파악되었다. 조건부 평균된 역방향 흐름의 면적과 박리 지점(separation point)의 관계를 분석한 결과, 역방향 흐름의 오른쪽으로 기울어진 분포와 대규모 흐름 방출 현상이 관측되었다. 박리 지점의 위치와 수리 매개변수의 관계를 분석한 결과, 상류의 수심 증가에 따라 증가하는 경향이 나타났다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.1
• /
• pp.1-10
• /
• 1997

In this paper, the effects of temperature change (low and high temperature) on the impact damages of CFRP laminates was experimentally studied. Composite laminates used for this experiment are CF/epoxy orthotropic laminated plates, which have two-interfaces $[0^{\circ}\;_6/90^{\circ}\;_6]s$ and $[0^{\circ}\;_4/90^{\circ}\;_4]s$. And CF/PEEK orthotropic laminated plates, which have two-interfaces $[0^{\circ}\;_4/90^{\circ}\;_4]s$. And, this study aims experimentally to present the interrelations between the impact energy vs. impact damages (i.e. delamination area and matrix crack) of CFRP laminates (CF/epoxy, CF/PEEK) subjected to FOD(foreign object damage) under low and high temperatures. A steel ball launched by the air gun collides against CFRP laminates to generate impact damages.

• Composites Research
• /
• v.16 no.2
• /
• pp.9-17
• /
• 2003

We have implemented a system of falling weight impact tester in order to evaluate the impact energy absorbing characteristics and impact strength of CFRP laminate plates. The absorbed energy of T-300 orthotropic composites is higher than that of quasi-isotropic specimen over impact energy 7J, but in case of using T700 fiber, much difference does not show. Also, absorbed energy of T-300 orthotropic composites, which are composed of the same stacking number and orientation became more than that of T700 fiber specimen however there was no big difference in case of quasi-isotropic specimens. Delamination area of impacted specimens was measured with ultrasonic C-scanner to find correlation between impact energy and delamination area. Delamination area and frequency responses were evaluated between impacted and unimpacted specimens. There is a strong correlation between frequency responses and impact-induced delamination. The presence and scale of damages have been investigated based on the variations of frequency responses.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.135-136
• /
• 2009

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.348-353
• /
• 2004

This study is aimed for the implementation of ultrasonic method to assess the reliability of turbine bearings. A modified ultrasonic immersion technique was carried out in both laboratory experiment and field application. From the laboratory results, we confirmed that the condition of interface layer between the babbitt and base metal be monitored by the C-Scan. The C-scan image by the ultrasonic immersion test can be used successfully to observe the condition of interface layer. The testing with a focused transducer provides a promising approach for estimating the extent of the damaged region and observing the interface layer effectively. The difference of the ultrasonic reflection ratio between the bonding and debonding area at the interface layer is one of the key parameters for assessing the extent of the damaged area; additionally, the reflection amplitude exhibits a favorable correlation with the overall damage level. The technique developed in this study was applied to the inspection of the turbine bearings at several power plants in Korea whereby the applicability in the field can be ascertained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.667-668
• /
• 2007

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.2
• /
• pp.81-88
• /
• 1997

Impact behavior of carbon fiber reinforced plastics (CFRP) laminates were evaluated with tension test and compact tension test. A steel ball launched by an air gun collides against CFRP laminates to generate impact damage of relatively low energy. The static tensile and fracture toughness tests were performed to evaluate the residual strength and the AE behavior of impact-damaged laminates. As a results, it was found that the static strength, the fracture toughness and the AE-event count were decreased with increasing of impact velocity and delamination area, and to have a different strength ratio and fracture toughness ratio for each stacking method. And also, it was confirmed that strength and fracture toughness of impact-damaged CFRP laminates could be evaluated and analyzed quantitatively by AE techniques.

• Composites Research
• /
• v.13 no.6
• /
• pp.30-38
• /
• 2000

In this paper, a system of falling weight impact tester was built up to evaluate the impact energy absorbing characteristics and impact strength of CFRP laminate plates in consideration of stress wave propagation theory. Delamination area of impacted specimens for the different ply orientation was measured with ultrasonic C-scanner to find correlation between impact energy and delamination area. Absorbed energy of quasi-isotropic specimen having four interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the more absorbed energy. Hybrid specimen containing GFRP layer was higher than that of normal specimens.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.55-67
• /
• 2013

This study focused on analysis condition and application method of the passive infrared thermography according to the direction and time to nondestructively detect the blistering zone of stone cultural heritage. As a result, the passive thermographic images showed different temperature characteristics by time because it sensitively reacts to air temperature, insolation and sunshine direction. In particular, the insolation and sunshine direction, which are periodically changed from 6:00 to 17:00, irregularly made surface temperature. In addition, surface temperature differences were brought on fresh zones and blistering zones except specific time since blistering causes erratic thermal transfer. As a result of examining the detection characteristics of blistering by time, the blistering was well detected between 9:00 and 10:00 when there was rapid increase in air temperature and insolation in all direction except the north. However, this study isn't considered effects of four seasons because it is carried out in autumn, and the passive thermography has difficulty to analyze the quantitative area of blistering zone. Therefore, an additional study for synthetic consideration of the passive thermography analysis about four seasons and quantitative modeling of blistering zone using the active thermography are needed.

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.668-673
• /
• 2020

In this work, ultrathin and two-dimensional (2D) cobalt hydroxide [Co(OH)2] nanosheets were synthesized by a sonication assisted liquid-phase exfoliation of bulk Co(OH)2. The resulting exfoliated Co(OH)2 is a hexagonal mono-layered nanosheet with a high specific surface area of 27.5 ㎡ g-1. The depolymerization of polyethylene terephthalate (PET) based on glycolysis reaction was also performed using an exfoliated Co(OH)2 catalyst. Excellent catalytic reaction performances were demonstrated; a high PET conversion and bis(2-hydroxyethyl) terephthalate (BHET) yield of both 100% using the nanosheet catalyst were achieved within a reaction time and temperature of 30 min and 200 ℃, respectively. The long-term stability of exfoliated Co(OH)2 catalysts was also demonstrated by recyclability tests of the catalyzed glycolysis reaction of PET over four cycles, showing both 100% of high PET conversion and BHET yield.