본 연구에서는 교육용 2개와 산업체용 2개의 남성 바지 패턴을 비교하여 중년남성의 체형에 가장 적합한 패턴제도법을 분석함으로써 맞음새가 우수한 중년남성 의복제작에 필요한 기초자료를 제공하고자 하였다. 가상착의에 대한 외관평가 결과, J패턴이 대부분의 항목에서 가장 우수한 것으로 평가되었으며, H패턴이 가장 부적합한 것으로 분석되었다. 공극량을 측정한 결과, 허리둘레 부분은 4개 패턴 모두 공극량이 매우 작은 것으로 평가되었고, 바지통은 J패턴이 가장 공극량이 작은 것으로 나타났다. 가상착의 외관평가, 색분포도, 단면도, 공극률 등을 종합한 결과, 중년남성의 체형에 J패턴이 가장 맞는 패턴이었다. 그러나 J패턴의 경우에도 바지길이에 대한 수정이 필요할 것으로 분석되었다. 본 연구는 교육용 2개와 산업체용 2개의 패턴만을 비교 분석하였으므로 J패턴을 중심으로 하여 실제 착의실험을 통한 중년남성용 바지 원형 개발이 필요할 것으로 생각된다.
This study was conducted in order to spread out lower body 3D scan data of men in their twenties. The aim was to achieve slacks pattern with ease allowance through comparison with existing flat patterns. For conversion of 3D scan data into 20 pattern, reference lines were established by using Rapid Foam in 3D shape analysis software. 2C-AN program and Yuka CAD were used to convert 20 pattern earned with straight posture of 3D scan data into slacks pattern by using Triangle Simplification & Runge-Kutta Method. In order to achieve this we needed to set a line 9cm below the hip line, to array vertex of each block to crease line while maintaining the horizontal line. And then we needed to set ease allowance in back crotch and to set waist circumference or hip circumference ease allowance in side seam of slacks. Results showed that long front crotch length can be achieved if 3D scan data is compared with 20 existing flat pattern. Slacks pattern that raise front crotch by about 1.5cm compared to back crotch and also possess ease allowance in back crotch area are great in appearance evaluation.
인간이 역사를 이루며 살아오면서 피복은 인간의 생활 수단으로서 빠뜨릴 수 없는 존재가 되었다. 사외 생활을 하면서 인간은 자신을 보호하고 남에게 자신의 이미지를 전달하고 자신의 욕구를 표출하면서 만족시키는데 있어 의복은 가장 중요한 역활을 하고 있고 인간 역시 그러한 것들을 의복에 의존하고 있는 것이다. 그러나 정상인을 위한 의복만 취급되어지는 시장에서 신체장애자들은 정상인보다도 더 세심하게 기능들이 고려된 의복이 필요함에도 불구하고 의복의 기능들을 생각하면서 의복을 선택할 수가 없다. 이러한 사앙들이 대두되면서 현대에 들어 신체 장애자 의복에 있어서 불편함을 없애고 보다 적합한 의복을 만들기 위한 연구가 진행되었다. 신체 장애자의 의복 연구는 Ward가 이 부분에 관심을 표명한 이후 임상 의사들에 의해 연구가 이루어지기 시작했다. 우리나라에서도 1976년 심성식의 한국 신체 장애자의 의복에 관한 연구를 기점으로 이 분야의 관심도가 높아지고 있으나 아직까지는 전반적으로 부족한 실정이다. 특히 위생적인 분야에서는 자료가 매우 부족하다. 이에 본 연구에서는 휠체어를 사용하는 하지 마비자의 체표 면을 떠서 기성복 패턴과 비교를 통해 보다 편안한 바지 패턴을 제시하고, 여름철에 많이 사용하는 직물로 바지를 제작하고 착용시킨후 인체 생리 반응을 분석하여 여름철에 쾌적한 바지를 알아 보았다. 이 연구를 통해 일반인과는 생활 자세가 다른 휠체어를 사용하는 하지 마비자와 일반인이 입는 기성복 바지를 착용 했을 때 생기는 불합리한 요소들을 고려하여 미적이고 기능적 및 위생적인 측면에서 신체 장애자에게 보다 적합한 바지를 제작하기 위한 기초 자료를 제공하고자 한다.값은 $f^{m}$ (p-1)-1 이다. (n=2m)이 많고 흡연 등의 만성 자극 요인이 있으며 술후 음성 호전에 걸리는 기간이 길어 보다 복합적인 측면에서 치료에 임하여야 할 것으로 사료된다. with such configuration.trap with 2.88[eV] deep of injected space charge from the chathode in the crystaline regions. The origin of ${\alpha}$$_2$ peak was regarded as the detrapping process of ions trapped with 0.9[eV] deep originated from impurity-ion remained in the specimen during production process of the material, in the crystalline regions. The origin of ${\beta}$ peak was concluded to be due to the depolarization process of "C=0"dipole with the activation energy of 0.75[eV] in the amorphous regions. The origin of ${\gamma}$ peak was responsible to the process combined with the depolarization of "CH$_3$", chain segment, with the activation
The study analyzes the lower-trunk sizes of 7-12 year old elementary school boys and compares sizes with boys, juniors, and men for analyzing and image fit. For the study, the data of SizeKorea (2004) was analyzed. Waist, hip, and the ratio of hip-thickness to hip-width were significantly different between age groups as well as between boys, juniors, and men. In the same height group, over 145cm boys had bigger waist than juniors and smaller waists than men. Therefore, the difference of waist size and the length of leg could cause the dissatisfaction of the pant fit when tall and plump boys chose a corresponding pants size to individual height or waist. The hip-thickness of body and pants patterns were compared in the analysis of the ease of hip-thickness. Tall and plump boys will feel discomfort in the crotch area because of the insufficiency of the hip-thickness of pants. Therefore, the amount of crotch extension of individual pants should be calculated by hip size instead of using the fixed amount. The reference sizes for discriminative pants for tall and plump boys were analyzed for a better fit.
It is remarkable that the children's wear market has been growing instead of declining birth rate. The parents are willing to pay more when they find children's wear of better design and improved quality. For better quality, it is necessary to research on the pattern making of children's wear. After the interview with the 10 leading children's brands, we found that they develop individual design pattern based on each items middle block pattern which characterize the brands design line. Most frequently used middle block is for casual pants. Through interview with pattern designers, comparative study of patterns drafting methods, wearing test of trial garments and altering and adjustment of patterns, we developed the casual pants block pattern for 7 years old boys.
본 논문에서는 기존 패턴캐드시스템 및 드레이핑시스템을 이용한 의복제작과정의 한계점과 개선가능성에 대해 알아보고, 이를 기반으로 새로 디자인한 의복제작시스템을 소개한다. 이 시스템은 원피스, 바지, 셔츠, 재킷 등 옷의 큰 스타일인 의복템플릿으로부터 의복디자인을 시작 한다. 소매, 카라, 포켓, 넥라인과 같은 템플릿 디테일들은 디자이너가 마음대로 다른 세부 템플릿들과 교체할 수 있으며, 세부 템플릿으로 커버할 수 없는 디테일한 수정은 3D 드레이핑 시스템과 2D패턴에디터에서의 직관적인 오퍼레이션을 통해 이루어진다.
국내 패션관련 교육기관은 대부분은 졸업작품 쇼를 행하고 있는데, 학생들이 직접 제작하는 작품 쇼의 경우는 시간적, 경제적 인 여유 부족과 정확한 모델 치수 및 이에 따른 인대와 원형패턴의 부재로 의상 제작 후, 사이즈 수정에 많은 시간을 허비하게 된다. 따라서 본 연구는 대학의 졸업작품 진행 과정의 문제점과 필요한 원형의 종류를 조사하고, 현역 A급 모델의 신체 치수를 계측하여 표준 사이즈를 조사하였다. 이를 토대로 아이템에 따른 원형을 제작, 이를 현역 모델에 착장하여 졸업 쇼를 위한 기본 패턴을 제시하고자 하였다. 졸업작품 쇼는 학교에 따라 진행하는 과정과 기간에 차이를 보이지만 대부분 모델 가봉 후 수선 정도가 많고 경우에 따라서는 의상을 새로이 제작하여야하는 경우도 발생하여 모델 사이즈의 기본원형에 대한 필요성이 많이 나타났다. 모델의 신체 계측결과 모델은 일반인에 비해 슬림하고 가는 체형이며 키가 크고 다리가 길다. 여자의 경우 어깨너비가 일반인에 비해 넓지만 가슴둘레와 허리둘레는 더 가늘게 나타났으며 어깨를 편 바른 자세여서 뒷품과 앞품의 차이가 적었다. 이는 남자 모델의 경우도 같게 나타났고 전체적으로 다리길이와 소매길이의 비율이 크게 나타났다. 여자의 경우 토르소와 스커트, 바지패턴을, 남자의 경우 재킷과 바지 패턴을 머슬린으로 제작하여 현재 활동 중인 A급 남녀 모델 각각 2명씩에게 착장하였다. 제작원형들은 그 맞음새가 모두 적절하였고 남녀 모두 상의 경우는 편차가 적은 어깨너비는 고정하고 품과 둘레항목에서 편차를 주어 패턴을 수정하는 것이 바람직하다. 하의의 경우 여자 모델은 엉덩이 부분에 여유가 없는 바지원형을 설계 제시하고, 이는 타이트 핏 팬츠나 스트레치 소재에 사용에 적절하고 여유 있는 바지의 경우는 엉덩이둘레 폭과 밑위너비 폭에 변화를 주는 것이 바람직하다. 남자모델의 경우 하의는 비교적 잘 맞아 수정이 필요한 부분이 없었으며 전체적인 둘레 편차 역시 3cm 내외로 작아 수정의 폭은 작다. 다만 키에 따른 다리길이 편차가 심해 모델에 따라 길이조정 이 필요하지만 전체적인 맞음새에 영향을 주지 않았다. 이와 같이 본 연구에서 제안한 모델 치수는 현재 우리나라에서 활동하고 있는 A급 모델을 기준으로 제안되었으므로 평균적인 모델 치수와 근접하다고 할 수 있다. 또한 연구패턴 역시 현재 모델의 신체에 적절하게 잘 맞았으며 모델 개인에 따른 신체 치수의 편차에 따라 차이를 보이겠지만 본 연구에서 제시된 패턴의 품 조절만으로도 충분히 잘 맞는 패턴으로 사료된다.
오늘날 지체장애인의 수는 후천적 원인으로 인하여 점점 증가하는 추세에 있다. 이에 본 연구는 훨체어를 사용하는 하반신마비자 중 성인남성을 중심으로 인체계측을 통해 적합성이 높은 바지를 개발하는데 목적이 있다. 연구 결과는 다음과 같다. 1. 인체계측 결과 하반신마비자들은 정상인과 비교했을 때 허리둘레 및 배둘레에서 유의한 차이를 보여 새로운 치수체계가 필요로 함을 알 수 있었다 또 자세 변화에 따른 둘레항목의 치수 변화와 피부 신축율에 의해 허리선의 변화가 고려되어 평상시의 휠체어에 앉은 자세에서 계측한 항목으로 원형이 설계되어야 할 필요가 있다고 분석되었다. 2. 연구원형은 기성복화 하기 위한 방법으로 먼저 기준치수(98-102)를 선정하고, 원형 각 부위는 절대치로 수치화 시켜서 제시하였다. 뒤밑위길이선은 허리선에서 8cm 늘이고 앞밑위길이선은 허리선에서 6cm 줄여 앉은 자세에서 편안함을 확보할 수 있도록 하였다. 기준치수의 경우 바지길이 107cm, 밑위길이 26cm, 밑위선 28cm, 엉덩이둘레선은 밑위선 위로 8.5cm, 바지부리는 10.5cm이고 외관과 기능성 평가 결과 대부분의 항목에서 우수한 평가를 받았다. 3. 계측 대상자 계측치를 근거로 치수의 출현율을 고려하여 연구 치수체계를 기본 신체부위인 앉은 허리둘레와 앉은 엉덩이둘레의 순으로 적용하여 총 7개의 치수로 설정하였다. 기준치수(98-102)의 연구원형을 마스터 패턴으로 하고 구체적인 원형 부위별 절대치로써 치수 차를 검토하여 연구 그레이딩 룰을 설계하였으며 기준치수 보다 작은 사이즈 88-93과 큰 사이즈 108-111의 적합성을 검증하였다.
In this research, a woman matched to the average Korean standard size specification of 21-24 years of age was scanned using Cyberware. Rapidform 2004 was used to separate the body zone into fit zone, action zone and design zone, depending on the function of the lower body. Each divided body zone expanded radially using 'offset' by 1.60mm at the cross section of the waist, and 6.36mm at the hip level. Resultant ease values were 1cm and 4cm along the waistline and hipline (respectively), as recommended in previous research. 2C-AN program and Yuka CAD was used to develop a pant pattern from the enlarged 3D body surface blocks. A total of five pants were constructed using conventional fabrics for light weight formal pants. The appearance of the experimental pants were evaluated by five clothing-major evaluators using a questionnaire that consisted of 21 questions. In addition, functional aspects of the experimental pants were also evaluated by wearer while performing five postures for the measurement of ease of movement. It was found that, the method of regional offset and suggested 3D to 2D pattern development generate reasonably good pant patterns. Among the pattern block arrangements, the method B was evaluated as the best way to generate formal pants from the tight-fit pattern, which fit smoothly over the lower body for maintaining ease of movement.
With the advent of smart clothing for health care and sports, the sophisticated designs with curved seams are drawing attention. One of the problems in those clothing is to determine the design curves in 2D pattern, such that it corresponds to the lines on the intended 3D body. Moreover, the difficulty increases when the original pattern needs to be changed for various sizes and body types. We compare two methods of pattern enlargement in this paper: one is the offset/projection type, and the other is the split grading type. For the enlarged pattern with offset/projection type, the 3D surface offset was first adopted to transform the standard lower body to the target larger size; next, the design lines were projected to the new 3D surface, following which the 3D pattern was developed from the newly transformed 3D surface. In the second method, the enlarged pant patterns were developed by the split grading method. Here, a 3D pattern was developed from the initial body, and then enlarged to the target size by the conventional split grading method. Two feminine pants patterns were examined by 3D virtual fitting. We observed that the 3D offset/projection pants pattern was well fitted, having an evenly distributed surplus, as compared with the sample developed using the split grading method. The difference between the two patterns were apparent at the location where several curved lines merged.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.