• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.296-300
• /
• 2011

In this work, various wood biomasses were used to determine the combustion characteristics for the fuel of cogeneration plant. Combustion characteristics of four types, i.e., (i) forest products, (ii) recycled wood, (iii) empty fruit bunch, and (iv) palm kernel shell, were examined via thermal gravimetric analyzer (TGA) in air atmosphere and coal was used as a comparison group. From the TGA results, the combustion of the wood biomass was occurred in the range of 280 to $420^{\circ}C$, which was lower than that of coal. Forest product showed the lowest activation energy (0.4 kJ/mol) compared to that of other wood biomasses (about 6 to 14 kJ/mol) and coal (64 kJ/mol). In addition, the reaction rate constant of the wood biomass was lower than that of coal. These results indicate the higher combustion initiation rate of wood biomass due to the high content of volatile matter, which had a low boiling point.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.184-196
• /
• 2012

Biomass burning activities(BBA) are caused by both natural and anthropogenic origins. Due to emissions of greenhouse gases and atmospheric aerosols during the burning process, BBA has been known to be one of important sources of atmospheric pollution and the climate change. However, the monitoring of BBA and its effects on atmospheric environment are not simple. This study evaluates the trends of BBA and its impact on atmospheric environment by using earth observing satellite. The results show that the most BBA were found over ever green, green vegetation types, and irrigated land cover types in study region. The trends of BBA and aerosol optical thickness which represents relative aerosol loading in the atmosphere, show similar pattern. Aerosol increases caused by BBA highlight the effectiveness of these mechanisms and would affect the regional atmospheric environment and climate change.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.1
• /
• pp.31-37
• /
• 2016

Co-firing of biomass with coal is a promising combustion technology in a coal-fired power plant. However, it still requires verifications to apply co-firing in an actual boiler. In this study, data from the Thermogravimetric analyzer(TGA) and Drop tube furnace(DTF) were used to obtain the combustion characteristics of biomass when co-firing with coal. The combustion characteristics were verified using experimental results including reactivity from the TGA and Unburned carbon(UBC) data from the DTF. The experiment also analyzed with the variation of the biomass blending ratio and biomass particle size. It was determined that increasing the biomass blending ratio resulted in incomplete chemical reactions due to insufficient oxygen levels because of the rapid initial combustion characteristics of the biomass. Thus, the optimum blending condition of the biomass based on the results of this study was found to be 5 while oxygen enrichment reduced the increase of UBC that occurred during combustion of blended biomass and coal.

• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.456-461
• /
• 2012

To verify the utilization of biomass as energy, the combustion characteristic has been studied by an experimental combustion furnace under an isothermal and non-isothermal combustion. The wood pellet, rice straw and rice husk were used as biomass samples in this work. The characteristics of emission gases, dusts and residues from biomass combustion have been analyzed and compared with those of reuse derived fuel (RDF). From isothermal combustion experiments, it was found that the incomplete combustion of rice straw was greater that that of rice husk, wood pellet and RDF. This is due to the fact that the combustion reaction rate of the rice straw was faster than that of other samples, and the oxygen concentration in rice straw combustion was rapidly decreasing. It was also found that $NO_{X}$ concentration of emission gas from wood pellet combustion was the lowest. From non-isothermal combustion experiments, it was found that all samples were burned before $900^{\circ}C$. Also, the temperature range of $NO_{X}$ emission was similar to that of CO emission, on the other hand, $SO_{2}$ was emitted at a higher temperature than that of CO emission.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.53-59
• /
• 2015

Combustion characteristics for co-firing of biomass (Walnut Shell) as blending fuel in coal fired boiler have investigated using thermogravimetric analyser (TGA) and drop tube reactor (DTR). The results show that devolatilization and char combustion for WS occurs at lower temperature than those of existing coals and has lower activation energy value, which is resulting in higher reactivity. When the WS is blended with coal, TGA results show linear profiles depending on blending ratio for each fuel. However, DTR results exist the non-additive phenomena for blending of WS. As blending ratio of WS increase, the UBC decrease at BBR 5%, but the UBC rather increase from BBR 10% due to oxygen deficiency formed from rapid combustion of WS. This paper propose that fuel lean condition by oxygen rich lead to higher blending ratio of biomass by solving the oxygen deficiency condition.

• Resources Recycling
• /
• v.30 no.4
• /
• pp.46-53
• /
• 2021

Biomass can be considered as chemical energy obtained from nature, and includes all living organisms such as plants, animals, and microorganisms. Biomass is eco-friendly, is easily obtainable from the environment, and can be recycled without special treatment processes. Biomass can also be converted into bioenergy fuel through pyrolysis and fermentation. Therefore, it has been considered as a renewable energy source, which prevents the depletion of natural resources such as fossil fuels. In this study, torrefaction to increase the carbon content in various types of biomass sources (sawdust, rice straw, rice bristles, coffee ground, and waste wood) was conducted under an inert atmosphere and at a temperature of 523~573K. The possibility of using torrefied biomass as an alternative to solid fuel for industrial purposes was analyzed by examining the carbon concentration and combustion behaviors.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.97-98
• /
• 2015

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.725-731
• /
• 2018

The effects of catalysts addition on the carbonization reaction of biomass have been studied in a thermogravimetric analyzer (TGA). The sample biomasses were Bamboo and Pine. The catalysts tested were K, Zn metal compounds. The carbonization reactions were tested in the nonisothermal condition from the room temperature to $850^{\circ}C$ at a heating rate $1{\sim}10^{\circ}C/min$ on the flowing of $N_2$ purge gases. Also, the effects of catalyst on the torrefaction were tested in the temperature condition of 220, 250, $280^{\circ}C$ at 30 min. Combustion characteristic for the torrefied catalyst biomass were studied in the nonisothermal conditions of $200{\sim}850^{\circ}C$. As the results, the initial decomposition temperatures of the volatile matters ($T_i$) and the temperature of maximum reaction rate ($T_{max}$) were decreased with increasing the catalyst amounts in the sample biomass. The char amounts remained after carbonization at $400^{\circ}C$ increased with the catalyst amounts. Therefore catalysts addition can be decreased the energy for carbonization process and improved the heating value of product char. The catalysts reduced the optimum torrefaction conditions from $250^{\circ}C$ to $220^{\circ}C$. The torrefied catalyst biomass have lower activated energy from 46.5~58.7 kJ/mol to 25.1~27.0 kJ/mol in the nonisothermal combustion reaction.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.9-10
• /
• 2014

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.594-597
• /
• 2007

바이오매스를 이용한 분산형 발전 및 에너지화의 경우 기존의 연소법은 단순 열에너지의 이용과 스팀터빈을 이용하는 대규모 시설이 요구된다. 반면 가스화의 경우 가연성 합성가스 생성을 통하여 소규모 분산형 발전이 가능하며, 생성가스를 이용하여 다양한 응용이 가능하다. 기존 상향류식 가스화의 경우의 바이오매스 가스화시 목질계 내 리그닌 성분으로 인하여 다량의 타르가 발생하여 후단 처리 설비에 어려움이 있다. 본 연구에서는 하향류식 가스화 방법을 통하여 목질계 바이오매스의 가스화 특성을 알아보았다. 가스화기 하부로 배출되는 합성가스의 온도는 대략 1000$^{\cdot}C$까지 유지할 수 있었으며, 생성되는 합성가스의 발열량은 약 $1300kcal/Nm^3$의 수준으로 얻을 수 있었다. 또한 발생되는 타르는 $5{\sim}15ppm$ 정도로 기존 상향류식에 비해 매우 적은양의 타르가 발생함을 확인할 수 있었다.