• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.69-76
• /
• 2004

In this paper, a VCDRO (Voltage Control Dielectric Resonator Oscillator) with low phase noise for X-band application has been designed and fabricated. A low noise and low flicker noise MESFET and a high Q dielectric resonator were selected to obtain good phase noise Performance. Also, a varactor diode having high Q, qualify factor was used to reduce the loading effects and a big Gamma of diode was chosen for linearity of frequency over voltage tuning range. The fabricated circuits was simulated with circuit design tools, ADS to provide the optimum performances. As the measured results of fabricated oscillator, the output power was 5.8 ㏈m at center frequency 12.05㎓ and harmonic suppression -30㏈c, phase noise -114 ㏈c at 100 KHz offset frequency, respectively, and the frequency tuning range as the function of valtage applied to varactor diode was 15.2 MHz and its power variation with frequency was 0.2 ㏈. This oscillator could be available to a local oscillator in X-band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.906-911
• /
• 2004

In this paper, a VCDRO(Voltage Control Dielectric Resonator Oscillator) applied to FMCW(Frequency Modulated Continuous Wave)Radar as stable source is implemented and constructed with a MESFET(Metal-semiconductor Field-Effect Transistor) for low noise, a dielectric resonate. of high frequency selectivity, and high Q varator diode to obtain a good phase noise performance and stable sweep characteristics. The designed circuits is simulated thrash harmonic balance simulation technique to provide the optimum performance. The measured result of a fabricated VCDRO shows that output is 2.22㏈m at 12.05GHz, harmonic suppression -30㏈c, phase noise -130㏈c at 100KHz offset, and sweep range of varator diode $\pm$18.7MHz, respectively. This oscillator will be available to FMCW Radar.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.345-350
• /
• 2005

An X-band push-push VCO for low cost applications is proposed. The designed push-push oscillator achieves a wide tuning range in the X-band by the collector bias tuning instead of extra varactor diodes. The measurement shows a wide tuning bandwidth of $900\;\cal{MHz}\;from\;10.9\;\cal{GHz}\;to\;11.8\;\cal{GHz}$ with a drain bias voltage varying from 4 to 9 V, excellent fudamental suppression of $-30\;\cal{dBc}$ and good phase noise of $-115\;\cal{dBc/Hz}\;@\;1\;\cal{MHz}$ offset.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.162-166
• /
• 2000

본 논문에서는 Ku-band용 전압제어 유전체 공진 발진기를 위상잡음 특성을 고려하여 설계하였다. 유전체의 높은 Q값은 좋은 위상잡음특성에 영향을 주나 전압제어를 위해 바렉터 다이오드의 연결된 튜닝 마이크로스트립라인의 길이에 따라 Q값의 변화하고 이로 인해 위상잡음 특성이 변화하am로 이를 고려하여 최적의 튜닝 마이크로스트립라인 길이를 시뮬레이션 견과를 통해 얻은 후 전압제어 유진체 발진기를 설계 하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.242-245
• /
• 2001

본 논문은 디지털 위성용 하향변환기에 적용되는 고안정 전압제어 마이크로파 발진기의 위상잡음 특성을 분석하였다. 전압제어 마이크로파 발진기는 능동소자의 비선형 등가모델과 궤환회로의 영향을 고려하여 유전체 공진 마이크로파 발진기를 위상잡음과 출력 전력에 절충(trade-off)하여 설계하였고, 13.25GHz의 발진주파수에서 출력이득은 12dBm이고, 위상잡음은 옵셋 주파수 100KHz 에서 -107.91dBc를 보였다. 바렉터 다이오드 동작에 의한 튜닝 범위는 2MHz/V로 위상동기 발진기에 응용할 수 있음을 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.756-761
• /
• 2009

In this paper, a X band voltage controlled oscillator is proposed. The oscillator uses a transistor as an oscillating element and its oscillating frequencies are controlled by the tuning voltage of varactor diode. Using the circuit simulation tools, the matching circuits between the transistor and varactor diode, its input and output matching circuits, and a feedback circuits are designed. The measured results of the fabricated oscillator show that its oscillation frequencies are from 10.50GHz to 10.88GHz according to the turning voltages of 1V to 18V, its output power levels are about 4.3dBm, and its phase noise is around -43.5dBc/Hz at 100kHz offset frequency of 10.5GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.9
• /
• pp.44-50
• /
• 2002

Recently, a envelope tracking(ET) amplifier that improves efficiency by changing of the bias according to the RF input level is presented to use for a high power amplifier of cellular radio handset using CDMA. The input and the output impedances of the ET amplifier may be varied by changing of the bias of the amplifier, and it makes the amplifier having low gain, low efficiency, and high input and output VSWR. In order to improve the input and the output mismatch of the amplifier, in this paper, two types of ET amplifier are suggested. In case of an ET amplifier using varactor diode, in experimentation, gain is improved about 7dB and the power consumption of the amplifier is better about 60% than that of the conventional amplifier. In case of a base voltage controlled ET amplifier, the gain and power consumption of the amplifier is improved about 9dB and 40% than those of the conventional amplifier, respectively.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.513-517
• /
• 2003

In this paper, a VCDRO(Voltage Control Dielectric Resonator Oscillator} applied to X-band as stable source is implementea and constructed with a MESFET for low noise, a dielectric resonator of high frequency selectivity and high Q varactor diode to obtain a good phase noise performance and stable sweep characteristics. The designed circuits is simulated through the harmonic balance simulation technique to provide the optimum performance. The measured results of a fabricated VCDRO show that output is 2.22dBm at 12.05GHz. harmonic suppression -30dBc. phase noise -130dBc at 100kHz offset. and sweep range of varactor diode $\pm$18.7MHz. respectively. This oscillator will be available to X-band application.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1333-1338
• /
• 2008

In this paper, RF varactor diode are applied to the design of miniaturized and tunable bandstop filter. The proposed bandstop filter is based on a Defected Ground Structure(DGS) section topology. The designed tunable bandstop filter can achieve a significant size reduction by with loading capacitance component of varactor diode. It is observed from the measured results that the proposed tunable bandstop filter shows a wide tuning range of 42.9 % from 1.01 GHz to 1.99 GHz. The rejection level in the stopband is higher as the number of DGS section increases. In case of the proposed tunable bandstop filter with two DGS sections, the rejection level of the filter is better than 20 dB in the stopband during the tuning. In this case, the maximum insertion loss in the lower passband is 0.5 dB.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.398-402
• /
• 2003

In this paper, a VCDRO(Voltage Control Dielectric Resonator Oscillator) applied to FMCW(Frequency Modulated Continuous Wave)Radar as stable source is implemented and constructed with a MESFET for low noise, a dielectric resonator of high frequency selectivity, and high Q varator diode to obtain a good phase noise performance and stable sweep characteristics. The designed circuits is simulated thrash harmonic balance simulation technique to provide the optimum performance. The measured result of a fabricated VCDRO shows that output is 2.22dBm at 12.05GHz, harmonic suppression -30dBc, phase noise -130dBc at 100kHz offset, and sweep range of varator diode $\pm$18.7MHz, respectively. This oscillator will be available to FMCW Radar.