• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.74-74
• /
• 2017

밀식파종 묘 이앙 시스템은 벼농사 생력화를 위한 재배법으로 비용 및 노동력을 획기적으로 줄일 수 있어 시간과 잉여 공간의 유효 활용을 통해 영농 규모의 확대로 인한 농업의 경쟁력을 높일 수 있다. 하지만 밀식 파종한 육묘를 관행과 동일한 1개 소당 3~4주 이앙 가능한 식부부 개발은 미흡한 실정이다. 밀식 파종한 육묘를 기존 이앙기로 이앙작업을 할 경우, 1개 소당 이앙되는 양이 많아져, 벼 생육을 저하 시키는 요인이 된다. 이러한 부분을 해결하기 위해서는 이앙 작업에 직접적으로 영향을 주는 이앙기식부부의 로터케이스, 이앙암을 분석하여 밀식파종 묘에 적용할 수 있는 기술이 필요한 실정이다. 본 연구에서는 식부부의 로터케이스, 이앙암을 3D 스캐너를 활용하여 스캐닝 작업을 한 뒤 역설계를 통하여 도면화 작업을 실시하여 식부부 궤적 분석을 실시하였다. 분석은 다물체 동역학 해석 프로그램인 Recurdyn(V8R4, Functionbay)을 활용하여 진행하였다. 분석결과, 식부부에 위치하는 이앙집게의 형상 및 로터케이스의 기어 배열에 따라 식부부가 형성하는 궤적의 형태가 달라지는 것을 확인 할 수 있었다. 이러한 부분은 밀식파종 묘에 적합한 궤적 분석 및 현장 필드 실험에 필요한 기초자료로 활용하고자 한다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.3
• /
• pp.225-228
• /
• 1989

Under the different conditions of planting density, maturation dates, stem length, oil contents, stem yield and seed yield of flax were investigated in 1984. The results were as followed: Wiera and Storment Goss were earlier in the maturation dates with increasing plant density, However Taijungsung #1 was delayed. Though there is a difference between the varieties stem length was getting longer with increasing plant density., Oil contents were getting higher with increasing plant density, stem yield and seed yield were increased with increasing plant density, on the contrary those were decreased by the growth of ciliary flax in the case of 1200 plants per 1.2m$^2$. Therefore optimum planting density of flax culture was 12cm x 6cm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.91-96
• /
• 1973

This study was conducted to determine optimum canopy type for dense planting with three soybean varieties possessing different types of canopy. The experimental plots were arranged in split-split plot design. Branches and pods per plant were both reduced by close planting, particularly keen responses were observed in the variety Clark. Number of nodes per plant seems a characteristics of each variety and was independent character from the plant height. Clark, tall variety, was most resistant to lodging and it may be due to the elasticity of the stem. Seed yields of Jangdan-Baikmok, branching type, tended to be lower at the dense spacing, whereas, branchless type variety Clark was higher in seed yield at the dense planting. These results indicate that the plant type possessing more nodes and less branching per plant with be suitable for dense planting.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.90-93
• /
• 2003

사초용 유채의 추파 재배에서는 경태, 주경엽수, 분지수, 분지엽수등의 수량 구성 형질과 생초수량은 휴폭 50cm $\times$ 주간 30cm의 점파구에서 가장 우수하였고 건물수량과 조 단백질함량, IVDMD, 가 소화 건물수량은 가장 밀식된 산파구에서 높았으며 NDF, ADF, Cellulose, Lignin등의 조섬유 함량은 식물체가 밀식된 상태에서 극히 세장한 관계로 가장 낮았다는 보고가 있었으나 (Ahn 등, 1989 ; Macforlane Smith 등, 1985) 우리나라 에서는 사초용 유채의 춘파 파종법(재식밀도)에 관한 시험연구는 아직 수행된바 없다. 따라서 본 시험에서는 사초용 유채의 재식밀도가 수량구성요소, 수량 그리고 영양가치에 미치는 영향을 구명하고자 Volox 품종을 공시하여 춘파 파종량 시험을 시험한 결과는 다음과 같다. 1. 초장을 제외한 경태, 주경엽수, 분지수, 분지엽수 등의 수량구성형질과 생초수량은 휴폭 50cm에 주간 30cm의 점파구에서 가장 우수하였다. 2. 건물수량과 조단백질 함량은 가장 밀식된 산파구에서 높았다. 3. IVDMD와 가소화 건물 수량은 산파구에서 가장 높았다. 4. NDF, ADF, Cellulose, Lignin 등의 조섬유 함량은 식물체가 밀식된 상태에서 극히 세장한 관계로 산파구에서 가장 낮았다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.255-258
• /
• 2006

This study was carried out to find the effect of the pinching and planting density on yield of petal and grain in safflower (Caythamus tinctorius L.). The planting density was high effective branch number per $m^2$ compared with pinching, and effective flower bud was most in $270ea/m^2$ in three line planting density, but in case of pinching was few at $186{\sim}223ea/m^2$ Grain yield was increased with 231 kg/10a at double line planting density compared with in 220 kg/10a of control. Petal yield of double line and three line planting density was 25.4 kg/10a and 26.9 kg/10a, it was increased 15, 22% compared with 22.0 kg/10a of control, respectively.

• 농업기술회보
• /
• v.40 no.9 s.483
• /
• pp.20-23
• /
• 2003

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.418-421
• /
• 2002

This study was carried out to clarify the effect of sowing method in four planting densities on growth and root yield of Cynanchum wilfordii. vine diameter, number of branches, number of branched roots, and root length, were greater in seedling transplanting than in direct sowing. In planting densities, main vine length, number of branches, and number of tillers were increased at higher planting density, but vine diameter, leaf length, leaf width, root length, and root diameter were increased at lower planting density. fresh root yield was greater in seedling transplanting than in direct sowing. In seedling transplanting, it was 53% higher in 27 plants per unit area than 1,680 kg/10a in 17 plants per unit area. Therefore, seedling transplanting in 27 plants per unit area showed most effective for increasing root yield of Cynanchum wilfordii.

• Korean Journal of Environmental Agriculture
• /
• v.2 no.1
• /
• pp.45-54
• /
• 1983

This experiment was carried out to investigate effects of dense planting on the growth and productivity in varieties of hot pepper at open field. Three varieties (Joseng jinheung, Weonkyo No. 304 and Bulam house Putgochu) were sowed on Jan. 30th and transplanted on May 12th. The planting densities used were 3,300, 5,500 and 8,300 plants per 10a. The results obtained are as follows: 1) With higher plant density, the plant shape was changed from open-type to upright-type and the yield was increased, presumably due to the increase of leaf area index. 2) LAI and SLA per unit area were increased by denser planting. Wonkyo No. 304 presented the highest LAI and the lowest SLA. 3) Dry matter weight per unit area was also increased, however the LW/SW ratio was tended to decrease on denser planting. 4) Through crop growth analysis, it was determined that CGR and NAR were increased during the early growth stages and became decreased from last June. 5) Light intensity under the canopy formed by denser planting was decreased by 40% measured at 60 ㎝ above the soil surface. The vertical distribution of fruits became concentrated the upper part of plant. Fruit yield per unit area in denser planting was increased as compared to the conventional planting. The number of fruit setting decreased. 6) Generally, no differences in yield were detected in comparison between denser planting and conventional planting harvested on Aug. 30th and Oct. 15th, respectively. But Weonkyo No. 304 increased yield by 18% in denser planting.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.491-497
• /
• 2015

Small-sized tuber of sweet potato (Ipomoea batatas Lam.) is more preferred by Korean consumers, because it is convenient to eat with hands, and can easily be steamed or roasted in small pan as a healthy snack for a small family. The present study was aimed to investigate the effect of high-density plantings and harvesting times on production of smallsized tuber (50~200 g). Four varieties ('Annobeny', 'Daeyumi', 'Shinzami', and 'Yeonhwangmi') were planted in 2-row zigzag high-density planting ($75{\times}30cm$, A; $75{\times}25cm$, B) and 1-row planting ($75{\times}25cm$, control) covered with black vinyl film on May 23th, 2014. Marketable yields and small-sized tuber yields were compared between 120- and 150-day harvesting. Vine length and fresh weight per plant were significantly decreased in 2-row planting A and B plots compared to the control at 120 days after planting. Weight of tuber per plant, mean weight of tuber and number of tuber per plant were significantly decreased in 120-day harvesting of A and B plots than in the control. Marketable yields per 10a were increased by 17% ($2.4ton{\cdot}10a^{-1}$) and 8% ($2.6ton{\cdot}10a^{-1}$) in 120-day harvesting of A and B plots compared to the control ($2.4ton{\cdot}10a^{-1}$), and those were largely increased by 29% ($4.0ton{\cdot}10a^{-1}$) and 26% ($3.9ton{\cdot}10a^{-1}$) in 150-day harvesting than in the control ($3.1ton{\cdot}10a^{-1}$). Proportions of small size tuber (50~200 g) were increased by about 65% in 150-day harvesting of A and B plots compared to the control (55.3%). Small-size tuber yield and marketable yield were highly increased in 150-day harvesting of 2-row zigzag high-density planting A ($75{\times}30cm$).

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.1-8
• /
• 1976

One of the most common needle leaf species used in planting in Korea is korean pine (Pinus koraiensis S. et Z.), and jack pine (Pinus banksiana Lamb.) is one of the test species for suitability. The relation of nursery bed density of 2-1 korean pine and 1-1 jack pine was studied at the Kwang Nung Nursery, Central Branch Station of Forest Research Institute, and about 40km north of Seoul. Nursery bed density of 2-1 korean pine, which ranged from 36 to 324 trees per square meters and of 1-1 jack pine, which ranged from 25 to 169 trees per square meters, had a marked effect on caliper, height, dry weight and percent and amount of plantable stock. The soil physical and chemical properties is silt plus clay, 50.55 percent; organic matter, 2.09 percent; total nitrogen, 0.13 percent; available phosphorus, 253.25 ppm; exchangeable potash, 0.46 m.e/100g; and pH, 5.58. As the density of the nursery seedling stand of 2-1 korean pine increases, the average tree height increases (Fig. 1A), but in 1-1 jack pine density do not affect to increase or decrease the average tree height. As the density of nursery bed increases, the average stem caliper (at 2cm above ground line) and dry weight decrease (Fig. 1B), but the decreasing rate is more seriously in 1-1 jack pine than 2-1 korean pine (Fig.5). As increasing the density of nursery bed, the T/R ratio of trees of the test species increase. Also the dry weight of leaf, stem and root parts are decreasing in proportion to the increase of stand density, but the drop rate of jack pine is more rapid than korean pine (table. 1) The patent facts of difference of growth characteristics between 2-1 korean pine and 1-1 jack pine were studied. These facts should be used to select the scale of stand density at the nursery bed or the plantable site. Korean pine is demanded high density, on the other hand in jack pine low density are more suitable to manage the stand density. Stands of comparatively low density had the greatest percentage of high-quality stock, and the stands of high density had less than the high quality trees of low density. An important criterion of the best density is percent and number of high-quality trees produced per square meter of bed area. Stem caliper and stem height of seedling is used in most public nurseries to sort seedling into plantable grades. The stock grade standard has set at 4.5mm caliper and 16cm height of 2-1 korean pine as the minimum desired stem caliper and height. By the result studies, the plantable stock grade standards of 2-1 korean pine used at stem height 16cm and stem caliper 4.5mm from public nurseries should be reformed to stem height 18cm and stem caliper 4.0mm by the growth characteristics and the tree distribution of stem height and caliper of relation to density. For the 2-1 korean pine, best density should be about 160 to 200 trees per square meter according to soil fertility. For the 1-1 jack pine, the suitable standard of plantable stock should be at stem height 25cm and caliper 6mm (at 2cm above ground line) and best density was about 100 to 120 trees.