• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.35-50
• /
• 2012

$900^{\circ}C$이상 초고온 He-gas 분위기 또는 용융불화염 (molten salts, FLINAK) 환경에서 사용될 VHTR(Very High Temperature Reactor)의 IHX(Intermediate heat exchanger)용 열수송 구조재료로 가장 가능성이 높은 합금인 Inconel 617 및 Hastelloy X 상에 습식화학적, 물리적기상합성법(Vacuum arc-plasma과 RF magnetron sputtering) 및 pack cementation에 의한 표면개질 및 마이크로 초내열(refractory ceramics) 코팅층(TiN, TiCN, TiAlN, $Al_2O_3$, $TiO_2$)을 형성시켰다. 고온 장기사용 시 문제가 될 수 있는 고온에서의 조직변화, 미세구조와 상(phase)형성, 고온 부식 및 그에 따른 마모(wear resistance) 손상 등 이들 소재의 내열, 내식 및 내마모 물성을 개선하는 연구를 수행하였다. TiAlN 박막의 경우 공기분위기에서 N이 분해되나 치밀한 산화물($TiO_2/Al_2O_3$ layer)을 형성하여 내식성 있는 보호피막을 형성함으로 기판과의 열팽창 계수로 인한 박리가 발생하지 않아 보호피막으로 적합하였다. Pack cementation법에 의한 aluminiding(Al-Ni합금)도 He 및 공기분위기에서 고온물성의 저하를 가져오는 $Cr_2O_3$의 생성을 충분히 억제하고 있었으며 He 및 air 분위기에서 사용이 가능한 박막으로 여겨진다. 내열 및 내식성에 대한 실험을 종합한 결과, 공기분위기에서 사용할 수 없는 박막은 He-gas 및 FLINAK(LiF-NaF-KF) 용융염 분위기에서도 사용할 수 없었으며, He-gas, FLINAK 및 air 분위기에서 모두 사용이 가능한 박막으로는 Inconel 617에서는 $(TiO_2-)Al_2O_3$, TiAlN 및 Al-Ni이었고 Hastelloy에서는 Al-Ni 및 $Al_2O_3$가 가장 적당하였다.

• Food Science and Preservation
• /
• v.19 no.6
• /
• pp.799-806
• /
• 2012

This experiment was conducted to establish the optimum conditions for high $CO_2$ gas treatment in combination with a proper gas-permeable packaging film to maintain the quality of fig fruit (Ficus carica L). Among the fig fruits with different high $CO_2$ treatments, the quality change was most effectively controlled during storage in the 70%-$CO_2$-treated fig fruit. Harvested fig fruit was packaged using microperforated oriented polypropylene (MP) film to maintain the optimum gas concentrations in the headspace of packaging for the modified-atmosphere system. MP film had an oxygen transmission rate of about $10,295cm^3/m^2$/day/atm at $25^{\circ}C$. The weight loss, firmness, soluble-solid content (SSC), acidity (pH), skin color (Hunter L, a, b), and decay ratio of the fig fruits were monitored during storage at 5 and $25^{\circ}C$. The results of this study showed that the OPP film, OPP film + 70% $CO_2$, and MP film+70% $CO_2$ were highly effective in reducing the loss rate, firmness and decay occurrence rate of fig fruits that were packaged with them during storage. In the case of using treatments with packages of OPP film and OPP film+70% $CO_2$, however, adverse effects like package bursting or physiological injury of the fig may occur due to the gas pressure or long exposure to $CO_2$. Therefore, the results indicated that MP film containing 70% $CO_2$ can be used as an effective treatment to extend the freshness of fig fruits for storage at a proper low temperature.

• Archives of design research
• /
• v.15 no.4
• /
• pp.275-284
• /
• 2002

To improve the social and economic position of the disabled people and secure their human rights, an integrated society should be buill. To build such a society, an adequate access should be provided to the movement or in using buildings or facilities. The inconveniences from social life on the part of the disabled people might not result from their impairment or disability, but from physical and social barriers in the environment surrounding them. Therefore, it is necessary to reconstruct entire systems of the society as a disabled people-friendly structure in order to remove those barriers, make them stand their own feet in our communities and freely participate in the social activities. This will eventually lead to build a society in which all people including the disabled people can use those facilities in a more convenient way. It is almost impossible for the disabled people to safely and conveniently access to and use facilities and equipments and freely move to their desired places, without any help from others in Korea. Even though, there are currently many disabled people-related convenience facilities, they have been independently built without a connection with other facilities and buildings, thus not greatly useful. Even when convenience facilities have been built, mostly they are superficially set up; therefore, in many cases, the disabled peOple cannot use those facilities. In this. research, I tried a new concept of mobile wheelchair lift design, which the disabled people can operate without restrictions, when using the public facilities. The key to this research was to develop the existing import-oriented simple functional products to a new system with functional safety and high quality orientation. Also, this research aimed at bringing an. import substitution effect, as well as preempting the mobile wheelchair lift market by advancing into overseas markets through application of new image designs in the field of disabled people aid equipments.

• Journal of Conservation Science
• /
• v.19
• /
• pp.19-30
• /
• 2006

Alteration of physical and chemical characteristics and the effect of removal of mineral substances in waterlogged archaeological woods by different cleaning processes were examined using oak wood(Quercus spp.) that was excavated from wetland near Gwangju, Korea. Cleaning methods employed in the present work were (1) tools, (2) deaeration, (3) EDTA and (4) ultrasonic cleaning, which are being currently applied in the field of preservation treatment. Cleaning process were performed independently or continuously. Composition of mineral substances in the waterlogged archaeological wood was almost same as the that of soil in which waterlogged archaeological woods were buried. In case of independent cleaning, tools cleaning efficiently removed the mineral substances on surface. Surface color become brighter after cleaning with EDTA. In contrast, deaeration and ultrasonic cleaning did not show any significant removal of mineral substances. In continuous cleaning process, tool cleaning as the first step treatment showed the same effect as shown in independent cleaning. Although deaeration as the second step cleaning did not remove the mineral substances, it could be assumed to contribute the infiltration of dimensional agents by homogenization of wood. EDTA treatment (the third step cleaning) removed the iron(Fe) and increased the whiteness of wood color. The ultrasonic treatment (the fourth step cleaning) removed the sodium(Na) remained after EDTA treatment and the fine mineral substances.

• Journal of Conservation Science
• /
• v.24
• /
• pp.13-22
• /
• 2008

The identification of species, hygroscopic property, and ability of ethylene gas absorption of 23 ancient charcoals excavated from wooden coffin burials and roof-tile kilns of Chudong-ri cultural site were investigated. All of the 12 charcoals excavated from wooden coffin burials were broad-leaved trees. Among the total 12 samples, 9 samples were Lepidobalanus and others were Celtis spp.. On the other hand, other 11 charcoals from roof-tile kilns were needle-leaved tree, Pinus spp.(hard pine). The broad-leaved tree charcoals from wooden coffin burials showed a higher moisture absorption capacity than needle-leaved tree charcoals from roof-tile kilns. The ethylene gas absorption was greater in the Lepidobalanus charcoal than that of Celtis spp. and Pinus spp. (hard pine) charcoal. The broad-leaved tree charcoal having high absorption ability of substances was due to a large microporous and specific surface area. Therefore, it was estimated that broad-leaved tree charcoals were filled in order to make favorable condition in tomb. The wood quality of pine is soft and easy to burn because of low specific gravity, as well as high calorific value by resin in wood. We could assume that the pine wood was used as fuel for roof-tile kilns because of easy control of heating and thermal power.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.615-622
• /
• 2020

Frangible bullets, which are shredded after impact on a target, reduce the possibility of both ricochet and unexpected injury in shooting training and in mission acts in dams, nuclear power plants, and cultural properties. Reducing the levels of hazardous materials in shooting ranges, such as lead, has become an important agenda for the government and environmental groups. In this study, the shape of a frangible bullet was designed for efficient shredding, and the safety and reliability were confirmed by actual firing under different process conditions. In addition, the physical characteristics, such as compaction pressure, density, and frangibility of each process, were compared by analyzing the microstructure of the sintered frangible bullet. The experiment revealed the smallest fragmentation after impact on the target under the following conditions: Cu-Sn 85:15; sintering temperature, 600℃; sintering time, one hour. Further development of the process conditions and experimental methods will contribute to the performance and environmental improvement of a frangible bullet.

• Korean Journal of Ecology and Environment
• /
• v.40 no.1
• /
• pp.130-142
• /
• 2007

This study was to examine impacts of turbid water on fish community in the downstream of Yongdam Dam during the period from June to October 2006. For the research, we selected six sampling sites in the field: two sites were controls with no influences of turbid water from the dam and other remaining four sites were the stations for an assessment of potential turbid effects. We evaluated integrative health conditions throughout applications of various models such as necropsy-based fish health assessment model (FHA), Index of Biological Integrity (IBI) using fish assemblages, and Qualitative Habitat Evaluation Index (QHEI). Laboratory tests on fish exposure under 400 NTU were performed to find out impact of turbid water using scanning electron microscope (SEM). Results showed that fine solid particles were clogging in the gill in the treatments, while particles were not found in the control. This results indicate that when inorganic turbidity increases abruptedly, fish may have a mechanical abrasion or respiratory blocking. The stream health condition, based on the IBI values, ranged between 38 and 48 (average: 42), indicating a "excellent" or "good" condition after the criteria of US EPA (1993). In the mean time, physical habitat condition, based on the QHEI, ranged 97 to 187 (average 154), indicating a "suboptimal condition". These biological outcomes were compared with chemical dataset: IBI values were more correlated (r=0.526, p<0.05, n=18) with QHEI rather than chemical water quality, based on turbidity (r=0.260, p>0.05, n=18). Analysis of the FHA showed that the individual health indicated "excellent condition", while QHEI showed no habitat disturbances (especially bottom substrate and embeddeness), food-web, and spawning place. Consequently, we concluded that the ecological health in downstream of Yongdam Dam was not impacted by the turbid water.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.3
• /
• pp.130-133
• /
• 2006

This study was conducted to select Codonopsis lanceolata seed's new pelleting particulate materials and adhesives. Different adhesives (Polyvinyl alcohol (PVA), Carboxymethyl cellulose (CMC), Polyvinyl pyrrolidone (PVP), Xanthan gum (XG), Arabic gum (AG)) and particulate materials (Illite, Diatomite, Pyrophyllite + Illite + Diatomite (PID), Pyrophyllite + Illite + Talc (PIT), Bentonite + Talc (BT)) were tested for seed pelleting. PID for Codonopsis lanceolata seed pelleting appeared to be the best particulate material. Among the pelleting adhesives, PVP was the best adhesive for seed pelleting, and the optimum concentration for germination of pelleting seed was 1 %. Germination rate of the pelleted seeds treated with PID particulate material and PVP adhesive was higher (86.8%) than those of raw seeds (85.5%). $T_{50}$ and MDG of pelleted Codonopsis lanceolata seed required five and eight days at soil moisture content of 50%, respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.59.2-59.2
• /
• 2009

화학보호복은 독성이 있는 화학물질 및 미세분진등에 대해 공기를 차단하며 완전 밀폐형으로 공기호흡기 및 에어라인 같은 호흡보호장치와 함께 착용하여 신체부위를 보호한다. 그 예로 생물/화학보호복은 유독하고 해로운 생물/화학물질로 부터 인체를 보호해준다. 이들 보호복은 다양한 환경이 노출되어 장시간 작업을 위해서 오랜시간 보호성능을 유지해야한다. 특히, 이런 원단의 구성은 플라스틱과 고무류의 다층구조로 구성되어있다. 플라스틱류(폴리에틸렌, PTFE 등)는 표면장력이 너무 낮아 접착하는데 어려운 점이 많이 대두된다. 일반적인 표면처리방법은 크게 물리화학적 방법으로 4가지로 분류한다. 화학적산화, 불꽃처리, 플라즈마처리, UV 방사법 등이 있다. 이들 중에서 가장 간단한 산화처리는 플라즈마처리다. 이처리는 상온/상압하에서 대기 중 또는 가스내에 방전에 의해 플라즈마를 형성하고 이 플라즈마가 대상물의 표면분자와 격렬히 반응하게 하여 표면의 분자구조를 변화시킴에 따라 소수성의 표면에 Carboxyl, hydroxyl과 carbonyl과 같은 친수성으로 변하여 결합능력을 증가 시켜 표면장력을 높여주는 가장 효과적인 방법이다. 플라즈마 표면처리를 하고 나면 육안으로 표면의 변화를 감지할 수 없지만 접착, 잉크, 코팅을 잘 받아들이는 결과를 가져온다. 플라즈마 표면처리의 효과는 주로 부도체의 필름이나 합성수지 계열의 인쇄성과 접착성을 향상시키고자 많이 활용되고 있는 실정이다. 특히, 화학보호복과 같은 플라스틱류인 다양한 고분자 합성수지(Polyethylene, polypropylene, nylon, vinyl, PVC, PET 등)에 적용가능하다. 본 연구에서는 플라즈마처리조건에 영향을 주는 변수들을 고려하여 실험계획법(DOE, RSM)을 이용하여 최적화된 플라즈마 공정을 향상시키고자한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.373-373
• /
• 2010

광촉매능을 갖는 $TiO_2$는 국내외적으로 많은 연구가 진행되고 있다. 빛의 조사로 발생하는 다양한 물리 화학적 촉매특성이 환경정화 뿐만 아니라 및 에너지 흡수차단 기능도 갖고 있어 최근 주목을 받고 있다. 응용분야로 초친수성 유리제품, 필터, 살균기능의 의료용 부품소재, 고효율 수소생산 및 태양전지 등에 활용성이 커서 친환경에너지 소재로 각광을 받고 있다. 본 연구에서는 초친수성 자동차의 사이드미러 개발을 위해 유리표면에 초친수성 $TiO_2$를 코팅하 고 그의 특성을 평가하였다. 특히, 이종밴드갭을 갖는 복합구조 $TiO_2/Cr_2O_3$/Cr 박막을 스퍼터링법으로 증착하여 중간층인 $Cr_2O_3$의 역할을 고찰하였다. 제조된 박막의 결정구조는 thin film형 X-선회절기(XRD)를 사용하여 분석하였으며, 박막의 표면 미세구조는 FE-SEM(Field Emission Scanning Electron Microscope)와 AFM(Atomic Force Microscope)으로, 화학구조는 XPS(X-ray Photoelectron Spectroscope)로 분석하였다. 친수성 평가는 실온 분위기에서 접촉각 측정기(Topcon-UVR2)를 사용하여 평가 하였으며 이때 조사되는 UV는 파장이 365nm이다. $Cr_2O_3$(비정질)/Cr박막위에 제조된 $TiO_2$ 박막은 균일한 anatase-$TiO_2$가 성장했으나, Cr, $Cr_2O_3$(결정질)박막위에 제조 된 $TiO_2$ 박막은 anatase상과 rulile상이 혼합된 형태로 성장하였다. $TiO_2$/Cr, $TiO_2/Cr_2O_3$(비정질)/Cr, $TiO_2/Cr_2O_3$(결정질)/Cr박막은 UV조사 1시간 만에 $10^{\circ}$ 이하의 초친수성을 나타내었다. 이종 밴드갭을 갖는 $TiO_2/Cr_2O_3$(비정질)/Cr박막은 40시간까지 친수성을 유지하는 결과를 나타냈다.