• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.1-10
• /
• 1993

Frequency response functions(FRF) are the most fundamental data for the frequency domain identifications of structural systems. In this paper, an improved method for estimating FRF's is presented. The new FRF estimator takes the weighted average of two conventional estimators, $H_1$(f) and $H_2$(f), utilizing the fact that $H_2$(f) gives more accurate estimate at resonance, while $H_1$(f) yields better results at antiresonances. Based on the estimated FRF's, the modal parameters of the structures, such as, natural frequencies, damping ratios and mode shapes, are also estimated. The effectiveness of the proposed method is investigated through numerical and experimental studies. The estimated results indicate that the proposed estimator gives more accurate results than other estimators.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.331-331
• /
• 2014

3족 질화물에 기반한 발광다이오드는 비소화물이나 인화물에 비해 여러 가지 장점을 가져 각광받아왔다. 특히, (Al)GaN 에 기반한 자외선 영역 발광 다이오드는 자외선 경화, 소독 등의 여러 가지 응용 가능성을 가진다 [1]. 하지만, 심자외선 영역으로 갈수록 높은 접촉 저항과 투명전극에서의 광흡수에 의해 전류주입 효율과 광추출 효율이 감소하여 결국 외부양자 효율이 더욱 열화되는 특성을 보인다. 이는 넓은 밴드갭을 가지는 물질을 이용하여 p-(Al)GaN 층에서 오믹접촉을 이루어야만 해결이 가능하지만 아직까지 이러한 결과가 보고된 바 없다. 본 연구에서는, 우리는 넓은 밴드갭을 가지는 silicon dioxide (SiO2) 에 전기장을 인가하여 p-GaN, and p-AlGaN 층에 전도성 필라멘트를 형성하여 전기전도도를 부여하는 연구를 진행하였다. p-GaN 과 p-AlGaN 위에서 5 nm 두께의 SiO2는 schottky 한 특성과 280 nm의 파장대역에서 약 97%의 투과율을 보였다. 비록 schottky 장벽이 형성되었지만, 전기전도도가 크게 향상되었으며 심자외선 영역에서 매우 낮은 흡수율을 보였다. 이는 기존의 증착후 열처리를 거쳐 제조된 전극에 비하여 우수한 특성을 지니며 향후 심자외선 영역 발광다이오드의 p-(Al)GaN 층 위에 오믹접촉을 이룰수 있는 가능성을 제시한다.

• Journal of Korean Society of Archives and Records Management
• /
• v.7 no.1
• /
• pp.129-143
• /
• 2007

In this study, various types and roles of records management and archives professionals are reviewed. Throughout the literature review, types and roles of the records management and archives professionals are analyzed. The results show that roles of professionals can be divided into the areas of records, users and management. In addition to focusing on records and archives, modern archival professionals must also be adept in such areas as knowledge management and digital asset management. Business and management skills for forging partership with related organizations are also needed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.145-145
• /
• 2010

반도체 소자의 크기가 수십 나노미터 영역으로 줄어들면서, 메모리 소자 또한 미세화를 위해 새로운 기술을 요구하고 있다. 1T DRAM은 하나의 트랜지스터와 하나의 캐패시터 구조를 가진 기존의 DRAM과 달리, 캐패시터 영역을 없애고 하나의 트랜지스터만으로 동작하기 때문에 복잡한 공정과정을 줄일 수 있으며 소자집적화에도 용이하다. 또한 SOI (Silicon-On-Insulator) 기판을 사용함으로써 단채널효과와 누설전류를 감소시키고, 소비전력이 적다는 이점을 가지고 있다. 1T DRAM은 floating body effect에 의해 상부실리콘의 중성영역에 축적된 정공을 이용하여 정보를 저장하게 된다. floating body effect를 발생시키기 위해 본 연구에서는 SOI 기판을 사용한 MOSFET을 사용하였는데, SOI 기판은 불순물 도핑농도에 따라 상부실리콘의 공핍층 두께가 결정된다. 실제로 불순물을 $10^{15}cm^{-3}$ 정도 도핑을 하게 되면 완전공핍된 SOI 구조가 된다. 이는 subthreshold swing값이 작고 저전압, 저전력용 회로에 적합한 특성을 보이기 때문에 부분공핍된 SOI 구조보다 우수한 특성을 가진다. 하지만, 상부실리콘의 중성영역이 완전히 공핍되어 정공이 축적될 공간이 존재하지 않게 된다. 이를 해결하기 위해 기판에 전압을 인가 후 kink effect를 확인하여, 메모리 소자로서의 구동 가능성을 알아보았다. 본 연구에서는 상부실리콘의 두께가 감소함에 따라 1T DRAM의 메모리 특성변화를 관찰하고자, TMAH (Tetramethy Ammonuim Hydroxide) 용액을 이용한 습식식각을 통해 상부실리콘의 두께가 각기 다른 소자를 제작하였다. 제작된 소자는 66 mv/dec의 우수한 subthreshold swing 값을 나타내며 빠른 스위칭 특성을 보였다. 또한 kink effect가 발생하는 최적의 조건을 찾고, 상부실리콘의 두께가 메모리 소자의 쓰기/소거 동작의 경향성에 미치는 영향을 평가하였다.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.558-574
• /
• 2014

The number of fatty liver patients is sharply growing due to the rapid increase in the incidence of metabolic syndrome, which can lead to diseases such as abdominal obesity, hypertension, diabetes, and hyperlipidemia. Early diagnosis requires examinations using magnetic resonance imaging (MRI), wherein quantitative analyses are implemented through a professional water-fat separation method in many cases, as the intensity values of the areas of interest and non-interest are considerably similar or the same. However, such separation method generates inaccurate results in high magnetic fields, where the inhomogeneity of the fields increases. To overcome the limits of such conventional fat quantification methods, this paper proposes a field map estimation method that is effective in high magnetic fields. This method generates field maps through echo images that are obtained using the existing IDEAL sequences, and considers the wrapping degree of the field maps. Then clustering is performed to separate calibration areas, the least square fits based on the region growing method schema of the separated calibration areas, and the histograms are adjusted to separate the water from the fats. In experiment results, our proposed method had a superior fat detection rate of an average of 86.4%, compared to the ideal method with an average of 61.5% and Yu's method with an average of 62.6%. In addition, it was confirmed that the proposed method had a more accurate water detection rate of 98.4% on the average than the 88.6% average of the fat saturation method.

• Journal of The Korean Association For Science Education
• /
• v.23 no.2
• /
• pp.165-175
• /
• 2003

The purpose of this study was to analyze the use of analogies in high school science textbooks in explaining abstract science concepts. For this study, the analogies used in high school science textbooks of the 7th science curriculum were analyzed. The analogies were classified into the six following types: the nature of shared attributes, representation, analogy/target abstraction, number of analogies, with and without specified use of analogy, and casual relations. A total of 189 analogies were found in the 7th science textbooks. This means that 16.9 analogies were used for each book. In analyzing the analogies, we found some analogies were appropriate, while others were ambiguous and inadequate in explaining the various science concepts. The number of analogies used varied considerably according to the publishing company and the science domain. For more effective understanding of various science concepts, it is necessary to develop more analogies and research the application of analogy.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.6
• /
• pp.562-570
• /
• 2009

An Experimental study was conducted on the flow characteristics and interference heating caused by a two-dimensional object protruding from a flat plate using a blow-down type of hypersonic wind tunnel. Inflow condition was a free-stream Mach number of 7.0 and a unit Reynolds number of $2.0{\times}10^6/m$. Experimental conditions were varied with three heights of protuberance for two flat plate models which have different lengths. Experimental data were obtained from Schlieren visualization images and heat flux measurements. Also, this paper suggests hypersonic experimental techniques such as boundary-layer detection method in detail. A Large separation region was observed in front of the protuberance and that region was very sensitive to the height of protuberance and the length of the flat plate. For only the highest protuberance, a severe jump of heat flux was observed at the top station among the measuring points. Measured heat flux is large when the height of protuberance is large and the length of flat plate is long.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.611-617
• /
• 2018

The application of health monitoring, including a fault detection technique, is needed to secure the structural safety of large structures. A 2-step crack identification method for detecting the crack location and size of the beam structure is presented. First, a crack occurrence region was estimated using the modified Laplacian operator for the strain mode shape obtained from the distributed local strain data. The crack location and size were then identified based on the natural frequencies obtained from the acceleration data and the neural network technique for the pre-estimated crack occurrence region. The natural frequencies of a cracked beam were calculated based on an equivalent bending stiffness induced by the energy method, and used to generate the training patterns of the neural network. An experimental study was carried out on an aluminum cantilever beam to verify the present method for crack identification. Cracks were produced on the beam, and free vibration tests were performed. A crack occurrence region was estimated using the modified Laplacian operator for the strain mode shape, and the crack location and size were assessed using the natural frequencies and neural network technique. The identified crack occurrence region agrees well with the exact one, and the accuracy of the estimation results for the crack location and size could be enhanced considerably for 3 damage cases. The presented method could be applied effectively to the structural health monitoring of large structures.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.3
• /
• pp.243-250
• /
• 2004

We describe a practical implementation of DVR (Digital Video Recording) system. And we propose a new image compression algorithm, that input video signal is divided into two parts, a moving target and a non-moving background part to achieve efficient compression of image sequences. This algorithm reorganizes a target area and a back-ground area by use of Macro Block(MB) unit on encoding scheme. The proposed algorithm allows high quality image reconstruction at low bit rates.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.68-71
• /
• 2010

극심한 고온 및 고압 환경에 노출되기 쉬운 항공우주 구조물에서 발생하는 기계적 삭마 현상을 해석하기 위하여 영역/경계 분할법을 적용한 삭마 해석 모델을 제안하였다. 영역 및 경계는 상변화 현상에 의한 비선형 거동을 하는 삭마 부영역과 선형 거동을 하는 선형 열탄성 부영역, 공유면, 경계 공유면으로 분할하였다. 삭마 재료 내부의 열분해 반응은 엔탈피 방법을 이용하였으며, 표면 침식 반응은 공기역학적 전단 응력과 삭마 재료의 전단 강도를 기반으로 매칭 기법을 이용하였다. 화학적 및 열적 삭마는 고려하지 않았으며, 간단한 수치 해석을 통해서 기본적인 기계적 삭마 특성을 분석하였다.