• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.11
• /
• pp.958-967
• /
• 2014

A hybrid method based on high-frequency asymptotic optics was developed in order to predict the RCS of flying vehicles for RCS reduction studies. In cavity return, the rays are assumed to bounce from the inlet cavity based on the laws of geometrical optics and to exit the cavity via the aperture. In other parts of a flying vehicle, the physical optics method is applied to compute the back-scattered field from the solid surface. The hybrid method was validated by considering simple models of sphere and sphere with cavity. In addition, RCS analysis of a flying vehicle was conducted using the new hybrid electromagnetic scattering method based on physical optics and geometrical optics theories.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.648-648
• /
• 2013

물리적, 열적, 광학적, 그리고 전기적으로 우수한 특성을 가져 학계의 관심을 받는, 2차원 탄소 물질인 그래핀을 준비하는 방법에는 여러가지가 있다. 초창기 그래핀 연구방법에 사용됐던 흑연 플레이크와 스카치테이프를 이용한 기계적 박리법, 흑연의산화와 환원을이용한 화학적 합성법, 구리나 니켈과 같은 전이금속을 촉매로 이용한 화학기상증착을 이용한 합성법 등이 있고 각각은 그 방법에 따른 장단점이 있다. 본 포스터에서는 이 중 물리적 박리법과 화학기 상증착 성장법을 이용해 얻은 그래핀의 물리적, 전기적 특성을 비교분석하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.1
• /
• pp.78-85
• /
• 2018

As a numerical analysis technique to predict the radar cross section of an aircraft, a full wave method or an asymptotic method is mainly used. The full-wave method is expected to be relatively accurate compared with the asymptotic method. The asymptotic method is numerically efficient, and it is more widely used in the RCS analysis. However, the error that occurs when estimating the RCS using the asymptotic method is difficult to predict easily. In this paper, we analyze the allowable limits of physical optics by constructing a wedge-cylinder model and comparing the RCS prediction results between the method of moment and physical optics while changing the edge shape. Finally, this study proposes a criterion for allowable limit of physical optics in the RCS estimation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.435-442
• /
• 2014

In this paper, radar cross section (RCS) analysis program, RACSAN has been developed to predict RCS of complex structures. RACSAN is based on the high frequency range analysis method of Kirchhoff approximation in physical optics (PO). This program can present RCS including multi-bounce effect in complex structures by combination of geometric optics (GO) and PO method. GO method has a concern in the evaluation of the effective area, and PO method is involved in the calculation of RCS for the final effective area that is evaluated by GO method. Comparisons of the predicted results and analytical solutions showed that the developed program could be an effective tool for predicting RCS in complex structures.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.140-148
• /
• 2008

In this study, a numerical method for a time-domain acoustic wave backscattering analysis is established based on a physical optics and a Fourier transform. The frequency responses of underwater targets are calculated based on physical optics derived from the Kirchhoff-Helmholtz integral equation by applying Kirchhoff approximation and the time-domain signals are simulated taking inverse fast Fourier transform to the obtained frequency responses. Particularly, the adaptive triangular beam method is introduced to calculate the areas impinged directly by acoustic incident wave and the virtual surface concept is adopted to consider the multiple reflection effect. The numerical analysis result for an acoustic plane wave field incident normally upon a square flat plate is coincident with the result by the analytic time-domain physical optics derived theoretically from a conventional physical optics. The numerical simulation result for a hemi-spherical end-capped cylinder model is compared with the measurement result, so that it is recognized that the presented method is valid when the specular reflection effect is predominant, but, for small targets, gives errors due to higher order scattering components. The numerical analysis of an idealized submarine shows that the established method is effectively applicable to large and complex-shaped underwater targets.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.82-91
• /
• 2000

In this study, a numerical scheme based on physical optics method is developed to predict RCS of perfectly conducting body. The scheme is verified through the comparisons of numerical values of cylinder and sphere with analytical ones. It is also applied to compute RCS of a fast naval craft. Major reflection of this ship at threat angle of 0 degrees is found to be due to superstructure and stern part of main hull. In order to investigate the shaping effects on the ship. inclination angles of the stern of main hull and superstructure are set to 12 degrees. The RCS of the ship with shaping is proven to be much reduced in comparison with one without shaping.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.1012-1019
• /
• 2015

This paper shows the acceleration of iterative physical optics(IPO) for radar cross section(RCS) by using two techniques effectively. For the analysis of the multiple reflection in the cavity, IPO uses the near field method, unlike shooting and bouncing rays method which uses the geometric optics(GO). However, it is still far slower than physical optics(PO) and it is needed to accelerate the speed of IPO for practical purpose. In order to address this problem, graphic processing unit(GPU) can be applied to reduce calculation time and adaptive iterative physical optics-change rate(AIPO-CR) method is also applicable effectively to optimize iteration for acceleration of calculation.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.208-209
• /
• 2004

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.85-90
• /
• 2000

The image quality of CRT displays is descnbed by the physical characteristics such as luminance, contrast, address ability, viewing distance, and so on. However, the final evaluation of rmage quality is deteITIlllled by not phYSICal data, but subjective perceived Image quality. Therefore the correlation is compared the score of subjective image qualIty accompli~hed by several persons with calculated SQRI (SQuate Root Integral) value uSlllg 4 kInds of CRT monitors. And the influence of tile physical chatac1eristics for subjective Image quality is analyzed on the basis of the validity of SQRI method as a metric for the evaluation of subjective image quality. ality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1555-1562
• /
• 2015

Metal oxide semiconductors have been applied in several areas, such as solar cells, sensor, optical elements and displays, due to the high surface area, unique electrical and optical characteristics. Zinc oxide among the metal oxide has excellent physicochemical properties. Zinc oxide is a n-type semiconductor with a wide direct transition band gap of 3.37 eV at room temperature and large exciton binding energy of 60 meV. Cation-doped zinc oxide studies were conducted to complement the electrical and optical characteristics. In this paper, Al-doped ZnO was synthesized by hydrothermal synthesis using microwaves. ZnO was synthesized by adjusting the precursor ratio and using different dopants. The optimal ZnO synthesis conditions for crystal shape and optical properties were determined. The optical properties of aluminum doped zinc oxide were then examined by SEM, XRD, PL, UV-vis absorbance spectrum, and EDS.