• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.629-638
• /
• 2016

In this study, the effect of inorganic constituents on the physicochemical properties of pyrolytic products produced from empty fruit bunch (EFB) by fast pyrolysis were investigated. Inorganic constituents were removed from the EFB by means of washing treatment with hydrofluoric acid (HF) and distilled water (D.I water). Ash content decreased from 6.2 wt% (EFB) to 2.4 wt% (HF-EFB) and 3.5 wt% (D.I-EFB), respectively. As a result of the inorganic component, a quantity of potassium in EFB has showed the highest removal efficiency in both HF and D.I water (HF: 80.3%, D.I water: 72.8%). Fast pyrolysis was performed with demineralized EFB in the fluidized bed reactor under the temperature of $500^{\circ}C$ at the residence time of 1.3 sec. The yield of bio-oil was determined to 57.3 wt% for HF-EFB and 52.1 wt% for D.I-EFB, respectively. Biochar yield decreased whereas yield of non-condensable gas increased with decreasing inorganic content of EFB. Water content decreased from 26.9% (EFB) to 9.9% (HF-EFB) and viscosity increased from 16.1 cSt (EFB) to 334 cSt (HF-EFB).

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.3
• /
• pp.138-147
• /
• 2006

In this study, the composition and physico-chemical characteristics of municipal solid waste (MWS) which was treated in national park area kyungnam-do landfill were investigated. It is necessary to measure the characteristics of MSW and sludge to build a waste treatment facility, the data-base and total managing of the landfill. This MSW was composed of 34.62% of food wastes, 36.05% of papers, 15.37% of plastics & vinyls, 2.28% of textiles, 3.33% of wood, 0.49% of rubber & leathers and others, respectively. Most of MSW are composed of food, paper and plastic waste and more than 90% was combustible waste. For three components, moisture is 29.84%, combustible component is 62.30% and ash is 7.86%. The chemical element has the high order of carbon, oxygen, hydrogen on the dry basis of wastes. Also, the low heating value of the MSW which is measured by calorimeter is calculated as 2377.8kcal/kg. low heating value of the sludge is calculated as 338.06kcal/kg.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.213-221
• /
• 1987

To use fly ash as an additive for concrete, authors collected 15 kinds of domestic fly ashes and tested the chemical compositions and physical properties of the fly ashes. Fluidity of the fly ash paste was also investigated. The result shows that the chemical compositions of the fly ashes were in the range of regulation of Korean Industrial Standards except ignition loss and the following relationships in fly ash were studied; specific surface and residue in standard sieve, specific surface and unit weight, residue in standard sieve and ignition loss. For the given flow properties, fly ash paste required higher water-binder ratio than cement paste.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.29.2-29.2
• /
• 2011

수용액 상에서 유기물이나 무기물의 전해산화에는 높은 산소과전압과 그 화학종에 대한 화학적, 물리적 안정성이 요구되며, 이러한 요구 조건을 만족하는 소재로써 백금족의 원소가 통상 사용되고 있으나, 가격이 매우 비싸다는 단점을 가지고 있다. 특히 고전류밀도 폐수처리 불용성 전극은 수용액을 전기분해할 때 높은 전류밀도를 낼 수 있으며, 폐수에 혼합되어 있는 각종 화학적 성분에 대한 화학적, 물리적 내구성이 있는 전극으로서, 현재 기존의 수처리용 전극은 금속 Ti을 기판으로 하여 그 위에 불용성 촉매로써 전도성 금속염을 도포, 열처리를 반복하여 산화물의 형태로 수 ${\mu}m$의 두께로 코팅하는 이른바, DSA (Dimensionally Stable Anodes) 전극을 사용하고 있는데, 이는 제조 단가의 상승과 금속 Ti 기판 상에 코팅된 전도성 금속산화물의 미약한 접착력으로 인한 탈리로 전극 전체의 성능 저하 및 수명 단축을 초래하는 문제점이 있다. 본 연구에서는 상기의 문제점을 개선하고자 대표적 불용성 촉매 물질인 백금을 RF magnetron 스퍼터링방식으로 100~300 nm 두께로 성막하여 Ti 기판에 대한 불용성 촉매 물질의 부착력과 내구성 및 모의 해수에 대한 해수전해 특성 등을 평가하였다.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.556-561
• /
• 2019

In this study, the physical and chemical analyses of petroleum residues (pyrolized fuel oil, PFO) were conducted and major components were selected to investigate their fire and explosion characteristics. Major component distribution areas of the PFO were identified via the GC-SIMDIS and MALDI-TOF analyses. In addition, the qualitative analysis of major component distribution areas was performed by GC-MS analysis. Major components of pyrolysis residue were selected based on the results of various analyses such as EA, SARA and TGA. As a result, benzene, toluene and xylene were selected as major components. Finally, the process hazard analysis software tool (PHAST) analysis was performed to investigate the range of maximum damage effect in case of fire and explosion. Toluene presented the highest risk due to the radiation effect of $227kW/m^2$ and 118 m in the case of jet fire. Xylene and benzene showed the maximum radiant heat values of 114 and $151kW/m^2$, respectively. It was also confirmed from the analysis of pasquill stability and wind speed that the radiant heat increased up to 55% according to wind speed in benzene, which was considered to be a main factor increasing the influence range.

• Journal of Korea Soil Environment Society
• /
• v.1 no.1
• /
• pp.81-88
• /
• 1996

To study the Cd adsorption in the presence of competing ions in soil-solution interphase, three soil samples from the Bt horizon were taken and analyzed for their physical and chemical properties. Adsorption of ethylene glycol monoethyl ether(EGME) and N, were determined to establish the specific surface area of the soils. We attempted to establish a qeneralizing competitive sorption isotherms for soils of entirely different composition of the solid phase, resulting in the routine use as a guidelines for the fate of reactive solute in soil profiles. Many physicochemical factors including competitive adsorption bettween solutes will affect the general adsorption phenomena as shown in a single not only on the soil:solution ratio used, but also on the surface areas of its respective soil samples. This phenomenon was attributed to competition Cd for sorption sites with Mg by different soil constituents. These adsorption isotherms are able to use as examples to demonstrate that this phenomenon can complicate the development of a standardized batch adsorption procedure as well as interpreting fate and adsorption of toxic inorganic compounds.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.3
• /
• pp.281-284
• /
• 1983

Interrelationship between. certain physicochemical properties of milled rice was investigated. Grain hardness and milling time were correlated with grain dimension. Equilibrium moisture content of rice upon soaking at room temperature showed a high negative correlation with the amylose content. The contents of protein, fat and ash had no relationship with hardness, milling time and equilibrium moisture content.

• The Journal of Engineering Geology
• /
• v.13 no.4
• /
• pp.429-444
• /
• 2003

Domestic marbles are mostly distributed in Gyeonggi and Yeongnam Massifs, southwest and northeast Ogcheon Belts, which belong to Precambrian, age-unknown, Cambrian-Ordovician ages, respectively. The former marbles occur as interbedded rocks in metasediments and xenoliths in granitic gneisses. Age-unknown ones occur as interbedded in the formations of Hyangsanri, Gyeomyeongsan, Hwajeonri and Munjuri, and some in metasedimentary rocks. The latter ones occur as interbedded in Pungchon Limestone, and in Jeongseon Limestone, Hwacheonri Formation and Great Limestone Group, respectively. Among physical properties, porosity shows irregular patterns to density and compressive strength, respectively. Absorption ratio has a linear pattern of positive trend to porosity, and compressive strength mostly shows a positive trend to tensile strength. Compressive strengths of the marbles are as follows : Precambrian $1,106{\;}kg/\textrm{cm}^2$, age-unknown $935{\;}kg/\textrm{cm}^2$. Cambrian $1,162{\;}kg/\textrm{cm}^2$ and Ordovician $1,560{\;}kg/\textrm{cm}^2$, respectively. Tensile strengths have decreasing trends as the above order of geologic age. In diagrams of major elements, $Al_2O_3,{\;}Fe_2O_{3(t)}{\;}and{\;}Na_2O+K_2O$ generally show positive trends with increasing $v_2$. MgO/CaO of Precambrian and age-unknown marbles have much higher values than Cambrian and Ordovician marbles as follows, Precambrian 0.31, age-unknown 0.30, Cambrian 0.03 and Ordovician 0.08. And MgO shows a negative trend with increasing CaO, which nay be caused by dolomitization. By MgO contents they can be classified into calcitic dolomite, dolomitic limestone, limestone and dolomitic limestone, respectively.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2006.05a
• /
• pp.95-96
• /
• 2006

• Proceedings of the KSEG Conference
• /
• 2001.03a
• /
• pp.15-22
• /
• 2001

퇴적암의 풍화특성을 파악하기 위해서는 풍화과정을 지배하는 암석의 광물 조성과 화학성분에 대한 연구가 필요하다. 본 논문에서는 풍화정도에 따른 퇴적암의 특성을 고찰하기 위해서 대구지역에 분포하고 있는 퇴적암을 채취하여 화학 및 광물성분 분석과 시간경과에 따른 물리 및 역학특성 시험을 실시하였다. 퇴적암에 대한 풍화판정법은 시험결과 Parker의 풍화지수식이 잘 일치하였고 모암에 함유된 $Al_2$O$_3$, CaO, $Na_2$O, $K_2$O, MgO등의 화학성분과 조장석(Albite, Ab), 백운모(Muscovite, Ms), 마그네타이트(Magenetite, Mt)등의 광물성분이 풍화와 밀접한 관계가 있었으며, 또한 암석의 풍화정도와 공학적 성질에 대한 상관관계식을 제안하였다.