• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.801-812
• /
• 2021

In order to delivery biotin to skin, ethosomes containing both biotin and ceramide were researched by using high pressure homogenizer. Biotin was utilized as a drug and ceramide NP was utilized as a supporter of bilayer. The biotin was entrapped in aqueous core, while ceramide NP was packed in the bilayer of the ethosomes. Looking at the physical properties of vesicles containing ceramide NP, the sized was 80~130 nm, the polydispersity index was 0.09~0.16, and the zeta potential was -40~-49 mV. In vesicles without ceramide NP, the size was 124.80±1.46 nm, and the zeta potential and polydispersity index were -45.48±1.27 mV and 0.088±0.018, respectively. Therefore, the ethosome with ceramide NP has improved physical properties of vesicles compared to the ethosome without ceramide NP. Skin absorption rates of ethosomes with ceramide NP were 6.13~14.98%, while skin absorption rate of ethosome without ceramide NP was 7.08% at 12 h. In conclusion, ethosomes containing ceramide NP not only improved the skin absorption efficiency, but had also a positive effect on the stability of vesicles.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.159-167
• /
• 2023

Titanium dioxide (TiO₂) is commonly used in sunscreen formulations to protect the skin surface and prevent the penetration of harmful ultraviolet (UV) rays by the physical scattering action of light. However, a disadvantage of using TiO₂ is that it can cause white turbidity when used on skin due to its inactive mineral ingredient. In addition, when TiO₂ particles are reduced to nanosize to eliminate opacity, they can increase the transmittance of visible light and reduce whitening, but may lead to serious skin problems, such as allergic inflammation. To overcome these issues, the bandgap of TiO₂ was controlled by adjusting the amount of oxygen defect and nitrogen amount, resulting in color TiO₂ tailored to the skin. This innovative technology can reduce the whitening phenomenon and effectively block blue light, which is known to cause skin aging by inducing active oxygen. The bandgap controlled TiO₂ compounds proposed in this study are hypoallergenic, broad-spectrum, and environmentally friendly. Furthermore, these compounds have been shown to significantly enhance sun protection factor (SPF) of sunscreens, demonstrating their compatibility with blue light blocking products.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.1
• /
• pp.33-47
• /
• 2003

Various applied-mineralogical characterization including measurements of surface area, size distribution, swelling index, and viscosity were done for some domestic bentonites in order to decipher the rheological properties and their controlling factors. The bentonites, which are Ca-type and relatively low-grade (rnontmorillonite contents: 30 ∼ 75 wt%), occur mostly as subhedral lamellas with the size range of 2 ∼ 4 $\mu\textrm{m}$. The size distribution of mineral fractions in bentonite suspension is dominant in the range of 10 ∼ 100 $\mu\textrm{m}$, and though rather complicated, exhibits roughly bimodal patterns. The feature is more conspicuous in the case of zeolitic bentonite. The bentonites have surface areas ranging 269 ∼ 735 $\m^2$/g, which are measured by EGME adsorption method. The EGME surface areas are nearly proportional to the rnontmorillonite contents, moisture contents, or total CEC. In the surface area measurements, zeolitic bentonites have slightly higher values than those zeolite- free types. The measured swelling index and viscosity of domestic bentonites are comparatively low in values. The swelling values of bentonites were measured to be 250∼500% at maximum by progressively mixing amounts of 2 ∼ 5 wt% Na$_2$CO$_3$, which varies depending on the contents of rnontmorillonite and other impurities, especially zeolite. Much amount of sodium carbonate is required for optimum swelling property of zeolitic bentonited which has usually strong Na- exchanged capacity. The bentonites, which are comparatively feldspar-rich and low in size and crystallinity, tend to be higher in viscosity values. Tn addition, the viscosity is largely higher in case of the bentonites with higher pH in suspension. However, the rheological properties of bentonites such as swelling index and viscosity do not show any obvious relationships with rnontmorillonite contents and mean particle size in suspension. In contrast, roughly speaking, the swelling index of bentonites is reversely proportional to the values of surface area which can be regarded as a collective physico-chemical parameter encompassing all the effects caused by mineral composition, surface charge, particle size, morphological farm, and etc. in bentonites. Thus, the rheological properties in bentonite suspension appear to be rather complicated characteristics which mainly depend on the flocculation of clay particles and the mode of particle association, i.e. quasicrystals, controlled by surface charge, morphology, size, and texture of rnon-tmorillonite, and which partly affected by the finer impurities such as zeolite.

• Analytical Science and Technology
• /
• v.14 no.2
• /
• pp.191-195
• /
• 2001

Cucurbitacin D and F, the protostane type triterpenoid of S. sorbifolia, were isolated with chromatograpic method and used as the standard substances for quantitative analysis. The compounds were identified with $^1H$-NMR, FAB-MS and UV spectrophotometer. They were separated on YMC-Pack ODS-AQ(303)[$250{\times}4.6mm$ I.D., $S-5{\mu}m$, 120A] column by HPLC. Cucurbitacin F was detected at 10.73mg/kg in cortex of S. sorbifolia, but cucurbitacin D was not. The compounds were shown to exihibit significant cytotoxicity($ED_{50}$<$0.1{\mu}g/mL$) against several tumor cell lines and acute toxicity(cucurbitacin D: 4.7mg/kg/day, cucurbitacin F: 2.5mg/kg/day) against BDF-1 mouse.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.1
• /
• pp.55-60
• /
• 2020

The aim of this study was to investigate the change of microbial contamination levels in the different areas and at the different time points after application of a quaternary ammonium compound (QAC) that has mechanical antimicrobial effect. The microbial contamination levels were measured in three different areas; unit chair handle, spit sink area and hand piece holder at different time points using adenosine triphosphate (ATP) monitoring system and ATP surface test kit. Hand piece holder showed the highest level of microbial contamination. In most of the clinics, QAC significantly reduced the levels of microbial contamination, and maintained antimicrobial activity for 4 to 6 months. QAC may be used effectively in dental clinics due to the duration of antimicrobial effect and the minimal exposure of chemicals and further studies are needed with large sample size.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.4
• /
• pp.79-88
• /
• 2005

The wastes generated in farming or fishing villages are mostly those of high moisture content or those once used for farming or fishing work, which require a complex process even for disposing of them alone, and moreover they have been recognized to cause a secondary side effects. The study thus is intended to conduct the basic character analysis and incineration test so as to develop the thermal decomposition furnace which will be optimal in disposing of the wastes generated from urban area that mostly have a high thermal energy or require a complex treatment process. And the subject included in the study, in addition, is to design and develop the furnace aimed at reducing the harmful ingredient as well as recycling the heat generated in the course of incineration.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.260-266
• /
• 2006

For the synthesis of polyurethane memory foam stabilizer with fine cells, hydrosilylation reaction with various polyalkyleneoxides and hydrogen functional group of polymethylhydrogensiloxane (D = 75, D' = 15) was conducted. Polyalkyleneoxides (PAO) used in this research were ethylene oxides or ethylene-co-propylene oxides with terminal groups of hydroxides or methyl groups. To analyze the molecular structures and molecular weights as well as the reaction yields (98%), NMR and GPC analysis were executed. Synthesized siloxane surfactants modified with polyalkylene (EO = 12 units) were applied to producing flexible polyurethane fine memory foams from 0.6 pphp to 2.0 pphp. By controlling the amount of the surfactant, physical characteristics, the polyurethane memory foam with cell size (minimum $0.868{\mu}m$), air flows (-78 KPa), and recovery times (8 sec) were achieved.

• Korean Journal of Food Science and Technology
• /
• v.21 no.1
• /
• pp.52-57
• /
• 1989

Large and small starch granules were isolated and characterized from kernels of Hiproly barley. Average size of large granules were $28-30{\mu}m$ and that of small granules were $6{\mu}m$. The small granules consist of 95% of total starch granules. Large granules contained more amylose than small granules. Distribution of isoamylase-debranched starch components, X-ray diffraction patterns, gelatinization characteristics by differential scanning calorimetry, and starch-granule susceptibility to acid were investigated. Large granules contained more long B chains of amylopectin and had the lower ratios of Fr. III to Fr. II , which represent one of the structural characteristics of amylopectin, than those of small granules. Small granules had higher conclusion temperature and smaller heat of gelatinization than those of large granules by D.S.C.. Both granules had A-type pattern of X-ray diffractopgrams, but hydrolysis of granules with acid showed different A-type patterns between large and small granules.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.771-776
• /
• 2016

The acrylate copolymer having good thermal stability, coating and adhesion properties was designed and prepared. We prepared copolymers in >95% high yield using methyl methacrylate, isobornyl methacrylate and 2-hydroxyethyl methacrylate monomers by the bulk and emulsion polymerization techniques. The $^1H$-NMR spectrum was used to identify chemical structure and glass transition temperatures increased from $123^{\circ}C$ to $140^{\circ}C$ confirmed by DSC, DMA and TGA analysis. In addition, as the content of IBMA increased, storage modulus and thermal decomposition temperature increased. As the content of IBMA increased from 10% to 30% in the composition for the entire monomer, tensile strength increased from 22 to 30 MPa in both polymers prepared by bulk and emulsion techniques. The contact angle increased from 70 to up to 88 degrees due to hydrophobic property of IBMA.

• Journal of Fisheries and Marine Sciences Education
• /
• v.21 no.3
• /
• pp.451-458
• /
• 2009

The purpose of this study is to analyze the nutrition composition and physiological changes, and to evaluate the food quality of live fish in cultured and wild fishes which have been kept in an aquarium tank. The moisture and lipid content of wild and cultured fishes when kept in an aquarium tank for seven-days storage was found to be lower than those of the initial stage storage(zero day). The breaking strength was also rapidly decreased in all of live fishes tested in this study as the periods of storage extended. The protein content did not differ significantly. However, the content of cortisol, which is a indicator indicating a stress reaction in tissues, was apt to increasing as the periods of storage extended. The cortisol content of wild fishes were higher than those of cultured fishes. On the other hand, the activity of activities of alanine aminotransferase (ALT) and aspartate aminotransferase (AST), which is also a indicator indicating a stress reaction, were not changed in the serum of wild and cultured fish, suggesting the ALT and AST activity dose not directly related with a healthy loss originated from stress. The death ratio of wild fishes were higher than cultured ones due to limited activity and stress during the storage in a aquarium tank.