• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.481-481
• /
• 2016

하천퇴적물은 물의 순환과정에서 유역으로부터 유입되는 물질에 따라 조성이 변하게 된다. 특히 입자가 작은 토양과 유기성 물질들은 물순환과정에 이동성이 크게 나타나며, 인간에 의해 개발된 지역은 자연상태에 비해 이동하는 물질이 많이 나타나곤 한다. 본 연구에서는 하천에 건설된 보에 대한 퇴적물 조사를 실시함으로서 향후 수질관리에 필요한 기초 자료를 수집하고자 하였다. 본고에서는 금강과 낙동강에 건설된 보의 주요지점에 대한 퇴적물 조사를 실시하고 수질영향을 평가하였다. 조사는 홍수기전과 홍수기후로 구분하여 2회에 걸쳐 실시하였으며 물리적 성상과 화학적 항목에 대한 분석을 실시하였다. 입도분석 결과 금강 주요 10개 지점의 퇴적물 조성은 Sand, Silt와 Clay 성분이 혼합되어 있는 것으로 분석되었으며, 삼각좌표 분류법에 의한 토성은 대부분의 지점이 실트질양토(SiL)로 평가되었다. 완전연소가능량은 0.35~1.37로 전 지점에서 하천 호소 퇴적물 오염평가 기준의 유기물 함량기준 13%보다 높지 않은 것으로 나타났으며 홍수기 전 후에도 거의 유사하였다. 금강에서는 중금속뿐만 아니라 유기물 및 영양염류도 기준보다 낮게 나타났으며, 모든 항목에서 환경부예규인 하천 호소퇴적물 오염평가 기준보다 낮게 평가되었다. 하상 퇴적물이 수질에 미치는 영향을 평가하는 용출실험에서도 유기물 및 중금속 모두 수질에 미치는 영향은 거의 없는 것으로 평가되었다. 낙동강 주요 26지점의 입도분석 결과 퇴적물 조성은 대부분 Sand로 구성되어 삼각좌표 분류법에 의한 토성은 사토(S)로 평가되었다. 홍수기 전 후에 조사한 결과 완전연소가능량은 0.27~2.85으로 전 지점에서 하천 호소 퇴적물 오염평가 기준의 유기물 함량 기준보다 낮았으며 홍수기 전 후에도 거의 유사하였다. 화학적 성상 분석 결과 모든 항목에서 환경부예규인 하천 호소퇴적물 오염평가 기준보다 낮게 평가되었으며, 용출실험에서도 유기물 및 중금속 모두 수질에 영향을 거의 미치지 않는 것으로 평가되었다. 이번 조사는 4대강 건설 후 하상이 안정화 되지 않은 상태로 인해 지점간 특별한 경향성은 확인할 수 없었으며 보다 정확한 결과 도출을 위해서는 장기적인 조사를 통해 평가해야 할 것으로 판단되었다.

• Journal of Life Science
• /
• v.19 no.10
• /
• pp.1432-1437
• /
• 2009

The aim of this study is to investigate cane molasses pretreatments for the production of cellulose by Acetobacter sp. V6, which has excellent bacterial cellulose (BC) producing capacity in the shaking culture. Among pretreatments of cane molasses, 1% (w/v) tricalcium phosphate (TP) treatment was more efficient in BC production. The physico-chemical properties of BCs that were produced in static and shaking cultures were also investigated. Although BC had an emulsifying ability, its emulsion stability was low. Water holding capacity (WHC) of BC was high; the WHC of BC produced in static culture was 14 times higher than that of $\alpha$-cellulose. In addition, the viscosity of BC was higher than that of $\alpha$-cellulose. Composition analysis by FT-IR showed no difference in composition between BC and plant cellulose. In the crystallinity analysis by XRD, all BC samples showed crystallinity. All BC samples showed reticulated structures consisting of ultrafine cellulose fibriles. Microfibriles of cellulose from static culture were especially more compact than those of cellulose from shaking culture.

• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.870-876
• /
• 1996

The physicochemical properties of chitin and chitosan produced from lobster shrimp (Metanephrups thomosonii) shell were investigated. Lobster shrimp chitin contained 6.84% nitrogen, 0.57% fat and 0.32% ash, while chitosan contained 7.52% nitrogen, 0.13% fat and 0.33% ash. Degree of deacetylation and molecular weight of chitosan were 67.5% and $9.1{\times}105$, respectively. Yields of chitin from the shell portion and chitosan from the chitin were 15.7% and 75%, respectively. Chitin and chitosan contained 2.64 and 1.39mg/g of residual amino acids, respectively, with both the most predominant being lysine. Chemical structures of the lobster shrimp chitin and chitosan have been investigated by the IR and solid state $^{13}C-NMR$ spectra.

• Korean Journal of Food Science and Technology
• /
• v.12 no.4
• /
• pp.324-327
• /
• 1980

The seeds of Torreya nucifera, which were shown to contain high level of oil, were characterized to evaluate their possible utilization as oil source. Oil was extracted by compression from the seeds and its physico-chemical properties and, total fatty acid composition were determined. The results are summarized as follows: 1. Proximate components of the seeds were shown to be: moisture, 12.3% ; crude protein, 9.46%; crude fat, 54.29 %; fiber, 5.28 %; ash, 2.13%. 2. Physico-chemical characteristics of the seed oil were determined as follows: specific gravity 0.92, refractive index 1.470, iodine value 127, saponification value 182.2, acid value 9.5, ester value 172.7. 3. The major fatty acids of the total lipids were linoleic (46.77%), oleic (31.68%) and palmitic acid (6.92%).

• Resources Recycling
• /
• v.7 no.2
• /
• pp.23-30
• /
• 1998

Aiming to rccycle the valuable mrnpunenl such as iron oxiiles and carbon from blast turnace sludge, [he physlco-chemical property and classification charactei~stics by hydrocyclone wcie invcstigxted. Carbon in sludge wils analysed to bo cxated mostly in coarse particles of sludge as a form of graphite whereas zinc lnortly in fine particles as zinc sulfides. On thc contrxy, iron oxides wne proved to be in the form of hematite, magnetile without any segregations according to particlc sizes of sludge. From the results of classiIication test using hydmcyclane of 75 mm dm, the recovcry and dczincificatian rate of low zinc sludge wcrc in the range of 67.9-73.6%, and 72.7-86 8%, respectively.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.593-606
• /
• 2003

This study was conducted to develop effective manufacturing methods of a total mixed ration(TMR) composed of broiler litter(BL) and bakery by-product(BB) for ruminants. Five experiments included a small-scaled manufacture of TMR using a deepstacking method(Exp. 1), its pelletization(Exp. 2), its field-scaled manufacture(Exp. 3), a field-scaled manufacture using an ensiling method(Exp. 4), and a mixing process of deepstacked BL and BB prior to feeding(Exp. 5). BL and BB were mixed at a ratio which makes total digestible nutrients of the TMR 69%. For each experiment, temperature, appearance and physico-chemical properties were recorded and analyzed. The chemical composition data revealed that the mixture of BL and BB showed nutritionally additive balance which resulted from a considerable increase(P<0.05) of organic matter and a desirable decrease(P<0.05) of protein and fiber up to the requirement level for growing ‘Hanwoo’ steers. Deepstacking of BL and BB in Exp. 1 and 3 resulted in a sufficient increase of stack temperature for pasteurization, little chemical losses, appearance of white fungi on the surface, and partial charring due to excess stack temperature. For Exp. 2, its pelleting, which was successful using a simple, small-scaled pelletizer, resulted in a little loss(P<0.05) of organic matter and an increase(P<0.05) of indigestible protein(ADF-CP). Ensiling the mixture in Exp. 4 made little effect on chemical composition; however, one month of the ensiling period was not enough for favorable silage parameters. Deepstacking BL alone in Exp. 5 tended(P<0.1) to decrease true protein : NPN ratio and hemicellulose content and increase ADF-CP content due to the heat damage occurred. Deepstacking or ensiling of BL-BB mixtures and simple incorporating of BB into deepstacked BL prior to feeding could be practical and nutrients-preservative methods in TMR manufacture for beef cattle, although ensiling needed further hygienic evaluation.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.305-312
• /
• 2014

The following study is the result of herbal teas puffed at different temperatures between $140{\sim}220^{\circ}C$. There was change of single breadth that some carbonization occurs according to rise of processing temperature and crude ash content rises relatively, and crude protein and crude fat content had hardly changed and moisture content decreased. The solid elution rate of the herbal teas appeared by 0.18~0.27% (w/w), it increased as puffing temperature rises. The reason for the increase in solid elution rates is due to the breakage of cross bridges between the raw materials in the herbal tea which are carbohydrates, proteins, lipids and etc. after treatments of physical changes rather than chemical ones. Benzopyrene content happened difference in B(${\alpha}$)P content according to processing temperature, raw material by 0.18~0.24 ppbs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.700-705
• /
• 2012

$Prunus$ $mume$ was steamed for easier removal of the pulp. The steamed fruit pulp was vacuum dried and powdered. The steamed $Prunus$ $mume$ powder (SPP) was passed through a 250 ${\mu}m$ sieve, fluidized in a fluid-bed granulator, and then granulated by top-spraying with water (SPPGW) or the extract obtained from steam (SPPGE). Then the physicochemical and sensory properties of SPP, SPPGW, and SPPGE were evaluated. The flowability of powder (angle of repose $^{\circ}$) of SPP, SPPGW and SPPGE was $23.59^{\circ}$, $11.07^{\circ}$, and $13.94^{\circ}$, respectively. The water dispersibility of SPP, SPPGW, and SPPGE was 18.69, 10.04 and 6.00 sec, respectively. Also, the overall acceptance of SPP, SPPGW and SPPGE was 3.00, 3.44 and 6.56, respectively. In conclusion, SPPGE can be used as granular steamed whole fruit pulp with good powder flowability and dispersibility, and therefore consumer acceptance.

• Journal of the Korean Ceramic Society
• /
• v.38 no.6
• /
• pp.522-530
• /
• 2001

발굴된 과거 고려청자의 화학성분조성과 물리적 특성에 대한 평가를 하고 미량성분의 청자의 발색에 미치는 영향을 고찰한 결과, 고려 청자 태토는 Fe$_2$O$_3$가 2%, TiO$_2$가 0.8% 함유되어 있었으며, 청자유는 석회.장석유로서 Fe$_2$O$_3$가 1.0~1.2%, TiO$_2$가 0.16% 포함되어 있었다. 비색청자의 경우 미량성분인 MnO$_2$가 P$_2$O$_{5}$의 함량이 0.37%와 0.76%, CuO는 300~500ppm 정도 함유하고 있었다. 반사율 측정 결과 일반적인 청자가 540~570nm의 장파장대에서의 반사율이 급격히 떨어지는데 반하여, 13세기 비색 청자의 것은 적색 파장대에서 10%이상 높았다. CoO는 미량 첨가로도 유약의 청색 파장대 반사율이 높고, 적색 파장대의 반사율이 급격히 떨어지며 청자 발색에 부정적인 영향을 미쳤다. CuO는 0.05%를 첨가했을 경우 적색 파장대에서 반사율 곡선이 높게 나타나고 있어 비색 청자발색에 효과적이었다. 또한 명도를 나타내는 L*값도 CuO가 첨가된 유약이 가장 높았고, 비색청자의 색상은 녹청자에 비해 맑고 깊은 색감을 보였다.

• Journal of the Mineralogical Society of Korea
• /
• v.8 no.1
• /
• pp.29-36
• /
• 1995

연옥은 구성광물의 조직, 결합양상 및 화학조성 등에 의해 일반적인 투각섬석과 구분되며, 색, 경도 및 인성 등에 의해 등급과 가치가 달라진다. 본 연구에서는 춘천산 연옥을 대상으로 연옥의 물리적 특성(조직, 경도 및 인성) 등의 연구가 수행되었다. 춘천산 연옥은 구성광물인 투각섬석의 조직, 입도 및 공생광물(불순물)의 특성에 따라 세 가지 유형(유형 I, 유형 II, 유형 III)으로 구분된다. 유형 I은 치밀한 극미립의 초미정질(<5$\mu\textrm{m}$) 투감섬석의 치밀한 집합체로서 구성되며, 유형 II와 유형 III은 미정질(10~30$\mu\textrm{m}$) 및 세립 (>50$\mu\textrm{m}$)의 투각섬석 집합체로서 투휘석, 활석, 녹니석 및 사문석 등이 미량으로 함유된다.연옥을 구성하는 세 유형의 투각섬석의 화학조성은 Fe, Al 성분이 유형 III에서 가장 높은 함량(1.07~1.88wt.% FeO, 1.3~2.59wt.% Al2O3)을 나타내며, 유형 II(0.22~0.37wt.% FeO, 0.66~0.77wt.% Al2O3), 유형 I (0.20~0.24wt.% FeO, 0.05~0.12wt.% Al2O3)의 순으로 감소함을 보이고, SiO2 성분은 유형 I (59.13~59.67 wt.%), 유형 II(58.02~59.40wt.%), 유형 III (57.34~58.63 wt.%)순으로 함량이 낮아짐을 알 수 있다.연옥의 미경도(VHN=311~659)와 파괴인성치(2.38$\times$105~5.62$\times$105 dyne.cm-3/2)는 유형 I, 유형 II, 유형 III의 순으로 낮아진다. 이러한 결과는 조직 및 집합구조의 특성과 밀접한 관계를 갖고 있음을 반영한다.